ISO 4762 · 2004

Hexagon socket head cap screw

A cylindrical head with an internal hexagon drive for mechanical assemblies with axial tool access. Screw length determines whether the shank is partially or fully threaded.

DIN 912 · UNI 5931

Dimensional range
M3–M48
Thread
Metric · coarse pitch
Configuration
Thread coverage depends on L
References
DIN 912 · UNI 5931
Hexagon socket head cap screw

Technical drawing

Technical drawing ISO 4762
d
nominal diameter
dk
head diameter
k
head height
s
hexagon socket size
t
socket depth
L
underhead length
b
reference thread length

Variants and dimensional data

Reference dimensions M3–M48, with commercial lengths selectable by diameter. Other diameters and lengths can be assessed on request, including dedicated production.

Dimensions in mm. Identification drawing, not a manufacturing drawing.

MPitch Pdk max.k max.st min.
30.55.532.51.3
40.77432
50.88.5542.5
6110653
81.2513864
101.5161085
121.751812106
1422114127
1622416148
182.52718149
202.530201710
222.533221711
24336241912
27340271913.5
303.545302215.5
333.550332418
36454362719
39458392721
424.563423224
454.568453226
48572483628

Reference thread length b depends on diameter, not on the three ISO 4014 length bands. Short screws may be fully threaded. The b value alone does not define the shank: incomplete thread and plain-shank limits must also be checked for the requested size.

Commercial reference lengths; availability requires confirmation for each configuration. For short screws, check full threading and incomplete thread under the head. The M45 reference thread length remains ND pending resolution of a source discrepancy.

Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.

Materials, classes, finishes and treatments

Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.

Execution referenceMaterialClass / hardnessDocumented finishes
DIN 912Steel8.8Black zinc plated; GEOMET 321A; Geomet 321b; Plain; Yellow zinc plated; Yellow zinc plated Cr III 12 µm with sealer; Zinc plated
ISO 4762Steel8.8GEOMET 321A; Plain; Yellow zinc plated; Zinc plated
DIN 912Stainless A2To be specifiedTo be specified
DIN 912Steel10.9GEOMET 321A; Geomet 500a; Plain; Zinc plated
DIN 912Steel12.9Dacro 320a; GEOMET 321A; Geomet 500a; Plain; Yellow zinc plated Cr III 12 µm with sealer; Yellow zinc plated and baked; Zinc plated
DIN 912Stainless A4To be specifiedTo be specified
DIN 912Stainless A480To be specified
DIN912Steel10.9Plain
DIN 912Steel12.9Plain
UNI 5931Steel10.9Zinc plated
ISO 4762Steel10.9Plain
DIN912Steel12.9Plain
UNI 5931Steel8.8GEOMET 321A; Plain
DIN 9128Steel8.8GEOMET 321A
UNI 5931Steel12.9GEOMET 321A
DIN 933Steel10.9Hot-dip galvanized
DIN EN ISO 4762 ex DIN 912PolyamideNot applicableNatural colour
DIN 912Stainless A5 · 1.4571To be specifiedTo be specified
DIN 912Duplex · 1.4462To be specifiedTo be specified
DIN 912Stainless HCR · 1.4529To be specifiedTo be specified
DIN 912Nylon PA66Not applicableTo be specified

“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.

Documentation

Download Dueemme data sheet ↓
DocumentStatus
Declaration of conformitySubject to order agreement
Material certificateSubject to order agreement
EN 10204 2.2 test reportSubject to order agreement
EN 10204 3.1 inspection certificateSubject to order agreement
Dimensional inspection reportSubject to order agreement
Coating reportSubject to order agreement
Other documentationSubject to order agreement

Batch documents are not automatically included: specify your requirements in the RFQ.

ISO, DIN and UNI: key differences

ISO 4762:2004

Main standard used for the dimensions in this data sheet.

DIN 912

Related family reference. Confirm edition, tolerances and mechanical requirements before substituting a component specified under a different standard.

UNI 5931

Related family reference. Confirm edition, tolerances and mechanical requirements before substituting a component specified under a different standard.

RFQ · ISO 4762

Configure your enquiry

Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.

Requested documents

The size you need, including custom specifications

Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.

Send your specification →

Variants

Dueemme Sidol
Panoramica privacy

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.