DIN 7984 · 2022-03

Low socket head cap screw

A low head for assemblies with restricted axial space. Head and socket geometry reduce loadability; this is not an automatic substitute for a regular socket head cap screw.

UNI 9327

The low head limits axial load compared with a full-loadability screw of the same property class. Marking may include a leading zero, such as 08.8 or 010.9; this does not designate a different alloy. Tightening and joint strength must be checked for the specified screw.

Dimensional range
M4–M16
Thread
Metric · coarse pitch
Configuration
Reduced-loadability head
References
UNI 9327
Low socket head cap screw

Technical drawing

Technical drawing DIN 7984
d
nominal diameter
dk
head diameter
k
head height
s
hexagon socket size
t
socket depth
L
underhead length
b
reference thread length

Variants and dimensional data

Commercial reference dimensions M4–M16 for the DIN 7984 family. For orders to the 2022 edition, confirm specification tolerances and conditions. Other sizes on request.

Dimensions in mm. Identification drawing, not a manufacturing drawing.

MPitch Pdk max.k max.st min.
40.772.82.51.1
50.88.53.531.9
6110442.4
81.2513553.2
101.516673.8
121.7518784.4
162249125.8

Full or partial threading must be confirmed for the individual size and supply. Listed commercial lengths do not guarantee a plain-shank length; b remains ND where the configuration has not been confirmed.

The low head limits axial load compared with a full-loadability screw of the same property class. Marking may include a leading zero, such as 08.8 or 010.9; this does not designate a different alloy. Tightening and joint strength must be checked for the specified screw.

Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.

Materials, classes, finishes and treatments

Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.

Execution referenceMaterialClass / hardnessDocumented finishes
DIN 7984Steel010.9GEOMET 321A; Plain; Zinc plated
DIN 7984Stainless A2To be specifiedTo be specified
DIN 7984Stainless A4To be specifiedTo be specified
DIN 7984Steel012.9Plain
DIN 7984Steel08.8Black zinc plated; GEOMET 321A; Plain; Yellow zinc plated; Yellow zinc plated Cr III 12 µm with sealer; Zinc plated
DIN 7984Steel8.8 (reduced loadability)Zinc plated

“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.

Documentation

Download Dueemme data sheet ↓
DocumentStatus
Declaration of conformitySubject to order agreement
Material certificateSubject to order agreement
EN 10204 2.2 test reportSubject to order agreement
EN 10204 3.1 inspection certificateSubject to order agreement
Dimensional inspection reportSubject to order agreement
Coating reportSubject to order agreement
Other documentationSubject to order agreement

Batch documents are not automatically included: specify your requirements in the RFQ.

ISO, DIN and UNI: key differences

DIN 7984:2022-03

Commercial reference dimensions M4–M16 for the DIN 7984 family. For orders to the 2022 edition, confirm specification tolerances and conditions. Other sizes on request.

UNI 9327

Related low-head family reference; it does not establish identical requirements and tolerances.

RFQ · DIN 7984

Configure your enquiry

Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.

Requested documents

The size you need, including custom specifications

Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.

Send your specification →

Variants

Dueemme Sidol
Panoramica privacy

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.