ISO 4032:2023
Main standard used for the dimensions in this data sheet.
Regular hexagon nut with a coarse metric thread. Select the nut material and property class to suit the joint and its mating bolt.
DIN 934 · UNI 5588


ISO 4032:2023 dimensional range M5–M39. Material and property-class diameter limits also apply to the enquiry.
Dimensions in mm. Identification drawing, not a manufacturing drawing.
| M | Pitch P | s | m min. | m max. |
|---|---|---|---|---|
| 5 | 0.8 | 8 | 4.4 | 4.7 |
| 6 | 1 | 10 | 4.9 | 5.2 |
| 7 | 1 | 11 | 6.14 | 6.5 |
| 8 | 1.25 | 13 | 6.44 | 6.8 |
| 10 | 1.5 | 16 | 8.04 | 8.4 |
| 12 | 1.75 | 18 | 10.37 | 10.8 |
| 14 | 2 | 21 | 12.1 | 12.8 |
| 16 | 2 | 24 | 14.1 | 14.8 |
| 18 | 2.5 | 27 | 15.1 | 15.8 |
| 20 | 2.5 | 30 | 16.9 | 18 |
| 22 | 2.5 | 34 | 18.1 | 19.4 |
| 24 | 3 | 36 | 20.2 | 21.5 |
| 27 | 3 | 41 | 22.5 | 23.8 |
| 30 | 3.5 | 46 | 24.3 | 25.6 |
| 33 | 3.5 | 50 | 27.4 | 28.7 |
| 36 | 4 | 55 | 29.4 | 31 |
| 39 | 4 | 60 | 31.8 | 33.4 |
Classes 8, 10 and 12 are nut property classes, not bolt classes. ISO 4032:2023 limits class 12 to M5–M16 and A4-80 to M5–M24. Do not extend class 80 automatically beyond M24. Fine threads require a separate standard reference. For M24 < D ≤ M39, A2-50 and A4-50 are also specified alongside A2-70 and A4-70; these class-50 combinations are not automatically extended to smaller diameters.
Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.
Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.
| Execution reference | Material | Class / hardness | Documented finishes |
|---|---|---|---|
| DIN 934 | Stainless A4 | 80 | To be specified |
| DIN 934 | Steel | To be specified | Black oxide; Black zinc plated; GEOMET 321A; Geomet 321b; Geomet 500a; Hot-dip galvanized; Nickel plated; Plain; Trivalent iridescent zinc plated; Yellow zinc plated; Yellow zinc plated Cr III 12 µm with sealer; Yellow zinc plated ≥12 µm; corrosion requirement to specify; Yellow zinc plated ≥7 µm; Zinc plated; Zinc plated ≥12 µm; Zinc plated ≥8 µm |
| DIN 934 | Steel | 10 | GEOMET 321A; Geomet 500a; Hot-dip galvanized; Plain; Trivalent iridescent zinc plated; Yellow zinc plated; Yellow zinc plated Cr III 12 µm with sealer; Zinc plated; Zinc plated ≥8 µm |
| DIN 934 | Nylon (PA) | Not applicable | To be specified |
| UNI 5588 | Steel | To be specified | Black zinc-nickel with sealer; GEOMET 321A |
| DIN 934 | Stainless A2 | To be specified | To be specified |
| DIN 934 | Stainless A4 | To be specified | To be specified |
| UNI 5588 | Steel | 6S | Black zinc-nickel with sealer |
| DIN 934 | Brass | Not applicable | Nickel plated; Plain |
| DIN 934 | Steel | 12 | Plain; Zinc plated |
| UNI 5588 | Steel | 12 | Plain |
| DIN 934 | Stainless A2 | To be specified | To be specified |
| UNI 5588 | Brass | Not applicable | Black zinc-nickel with sealer |
| DIN 267-4 | Steel | To be specified | Black oxide |
| ISO 4032 | Steel | 8 | Hot-dip galvanized; Plain; Yellow zinc plated; Zinc plated |
| ISO 4032 | Steel | 12 | Hot-dip galvanized; Plain |
| ISO 4032 | Stainless A2 | To be specified | To be specified |
| ISO 4032 | Stainless A4 | To be specified | To be specified |
| ISO 4032 | Steel | To be specified | Yellow zinc plated Cr III 12 µm with sealer |
| DIN 34814 ex DIN 934 | Polyamide | Not applicable | Natural colour |
| DIN 934 | Stainless A5 · 1.4571 | To be specified | To be specified |
| DIN 934 | Duplex · 1.4462 | To be specified | To be specified |
| DIN 934 | Stainless HCR · 1.4529 | To be specified | To be specified |
“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.
| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
Main standard used for the dimensions in this data sheet.
Withdrawn standard. At M12: DIN width across flats 19 and nominal height 10 mm; ISO width 18 and maximum height 10.8 mm. Check space requirements before substitution.
Withdrawn without replacement on 31 March 1995. Historical hexagon-nut reference; check dimensions against the current ISO edition.
Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.
Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.
Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.
Send your specification →