ISO 4035:2023
Main standard for the coarse-pitch dimensions shown here. The reduced height requires style-0 property classes and checks.
A compact axial profile for adjustment and space-limited connections. When used as a jam nut, pair it with a regular or high nut; it does not provide the loadability of a full-height nut on its own.
DIN 439 B
The thin profile has reduced loadability. Class 04 is not class 4, 4.8 or 8: retain the leading zero. Jam-nut use requires an appropriate joint arrangement and a defined tightening procedure.


ISO 4035:2023 dimensions from M5 to M39. Material/finish selection is limited to verified combinations; enquire about other diameters, pitches and configurations.
Dimensions in mm. Identification drawing, not a manufacturing drawing.
| M | Pitch P | s | m min. | m max. |
|---|---|---|---|---|
| 5 | 0.8 | 8 | 2.45 | 2.7 |
| 6 | 1 | 10 | 2.9 | 3.2 |
| 7 | 1 | 11 | 3.4 | 3.7 |
| 8 | 1.25 | 13 | 3.7 | 4 |
| 10 | 1.5 | 16 | 4.7 | 5 |
| 12 | 1.75 | 18 | 5.7 | 6 |
| 14 | 2 | 21 | 6.42 | 7 |
| 16 | 2 | 24 | 7.42 | 8 |
| 18 | 2.5 | 27 | 8.42 | 9 |
| 20 | 2.5 | 30 | 9.1 | 10 |
| 22 | 2.5 | 34 | 9.9 | 11 |
| 24 | 3 | 36 | 10.9 | 12 |
| 27 | 3 | 41 | 12.4 | 13.5 |
| 30 | 3.5 | 46 | 13.9 | 15 |
| 33 | 3.5 | 50 | 15.4 | 16.5 |
| 36 | 4 | 55 | 16.9 | 18 |
| 39 | 4 | 60 | 18.2 | 19.5 |
The thin profile has reduced loadability. Class 04 is not class 4, 4.8 or 8: retain the leading zero. Jam-nut use requires an appropriate joint arrangement and a defined tightening procedure.
Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.
Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.
| Execution reference | Material | Class / hardness | Documented finishes |
|---|---|---|---|
| DIN 439 | Stainless A4 | To be specified | To be specified |
| DIN 439 | Steel | 04 | Black oxide; Plain; Zinc plated |
| DIN 439 | Stainless A2 | To be specified | To be specified |
| DIN 439 | Steel | To be specified | Yellow zinc plated Cr III 12 µm with sealer |
| DIN 439 B | Stainless A5 · 1.4571 | To be specified | To be specified |
| DIN 439 B | Duplex · 1.4462 | To be specified | To be specified |
| DIN 439 B | Stainless HCR · 1.4529 | To be specified | To be specified |
“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.
| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
Main standard for the coarse-pitch dimensions shown here. The reduced height requires style-0 property classes and checks.
DIN 439 B is a related historical reference: widths across flats and heights can differ. It is not an absolute equivalent. ISO 8675 covers fine pitch instead.
Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.
Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.
Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.
Send your specification →