ISO 8675 · 2023

Fine-pitch hexagon thin nut

A thin profile for adjustment and jam-nut applications on metric fine threads. Always specify both diameter and pitch: M12 × 1.5 and M12 × 1.25 are not interchangeable. In jam-nut applications, use the thin nut together with a regular or high nut.

DIN 439 B · ISO 4035

The thin profile has reduced loadability. Class 04 is not class 4, 4.8 or 8: retain the leading zero. Jam-nut use requires an appropriate joint arrangement and a defined tightening procedure.

Dimensional range
M8–M39
Thread
Metric · fine pitch
Configuration
Style 0 · reduced loadability
References
DIN 439 B · ISO 4035
Fine-pitch hexagon thin nut

Technical drawing

Technical drawing ISO 8675
d
nominal diameter
P
fine pitch
s
maximum width across flats
m
minimum and maximum height

Variants and dimensional data

ISO 8675:2023 dimensions from M8 to M39, covering 19 diameter/pitch pairs. Configurable supply combinations are listed separately. Other diameters and pitches on request.

Dimensions in mm. Identification drawing, not a manufacturing drawing.

MPitch Psm min.m max.
81133.74
101.25164.75
101164.75
121.5185.76
121.25185.76
141.5216.427
161.5247.428
182278.429
181.5278.429
202309.110
201.5309.110
222349.911
221.5349.911
2423610.912
2724112.413.5
3024613.915
3325015.416.5
3635516.918
3936018.219.5

The thin profile has reduced loadability. Class 04 is not class 4, 4.8 or 8: retain the leading zero. Jam-nut use requires an appropriate joint arrangement and a defined tightening procedure.

Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.

Materials, classes, finishes and treatments

Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.

Execution referenceMaterialClass / hardnessDocumented finishes
DIN 439Stainless A2To be specifiedTo be specified

“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.

Documentation

Download Dueemme data sheet ↓
DocumentStatus
Declaration of conformitySubject to order agreement
Material certificateSubject to order agreement
EN 10204 2.2 test reportSubject to order agreement
EN 10204 3.1 inspection certificateSubject to order agreement
Dimensional inspection reportSubject to order agreement
Coating reportSubject to order agreement
Other documentationSubject to order agreement

Batch documents are not automatically included: specify your requirements in the RFQ.

ISO, DIN and UNI: key differences

ISO 8675:2023

Standard for style-0 thin nuts with metric fine threads. The pitch must match the mating male thread. Tabulated dimensional limits refer to the 2023 edition.

DIN 439 B

Historical commercial reference also used for fine-pitch versions. DIN widths across flats may differ from ISO, particularly at M10, M12, M14 and M22: specify standard and pitch when ordering.

ISO 4035:2023

Separate coarse-pitch family. A matching nominal diameter does not make coarse and fine threads interchangeable.

RFQ · ISO 8675

Configure your enquiry

Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.

Requested documents

Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.

The size you need, including custom specifications

Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.

Send your specification →

Variants

Dueemme Sidol
Panoramica privacy

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.