DIN 6912

Low socket head screw with pilot recess

A low head and hexagon socket with a pilot recess for the tool. Intended for restricted axial space, this geometry differs from low-head screws without a pilot recess: check the housing, tool and required load.

The low head and pilot recess reduce the load-bearing section. Do not automatically apply the load or torque of an ISO 4762 screw of the same class. A leading zero in the class marking denotes reduced loadability, not a different material.

Dimensional range
M5–M16
Thread
Metric · coarse pitch
Configuration
Reduced-loadability head
Low socket head screw with pilot recess

Technical drawing

Technical drawing DIN 6912
d
thread
P
pitch
dk
head diameter
k
head height
s
hexagon socket
t1
reference socket depth
t2
minimum depth including pilot recess.

Variants and dimensional data

Commercial dimensions M5–M16. Lengths are recorded for each diameter; other diameters and lengths can be assessed on request, including dedicated production for substantial quantities.

Dimensions in mm. Identification drawing, not a manufacturing drawing.

MPitch Pdk max.k max.st1 ref.t2 min.
50.88.53.5424
6110452.55
81.25135636.5
101.5166.583.57.5
121.75187.51049
142218.5124.510
1622410145.511.5

Full or partial threading must be confirmed for the individual size and supply. Listed commercial lengths do not guarantee a plain-shank length; b remains ND where the configuration has not been confirmed.

Indicative supplier-catalogue weight for each steel diameter/length combination. It is not a normative or certified batch weight; do not transfer values to stainless steel.

The low head and pilot recess reduce the load-bearing section. Do not automatically apply the load or torque of an ISO 4762 screw of the same class. A leading zero in the class marking denotes reduced loadability, not a different material.

Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.

Materials, classes, finishes and treatments

Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.

Execution referenceMaterialClass / hardnessDocumented finishes
DIN 6912Steel8.8 (reduced loadability)Plain; Zinc plated
DIN 6912Steel08.8GEOMET 321A; Plain; Zinc plated
DIN 6912Steel010.9Plain; Zinc plated
DIN 6912Stainless A2To be specifiedTo be specified
DIN 6912Stainless A4To be specifiedTo be specified
DIN 6912Steel10.9 (reduced loadability)Zinc plated

“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.

Documentation

Download Dueemme data sheet ↓
DocumentStatus
Declaration of conformitySubject to order agreement
Material certificateSubject to order agreement
EN 10204 2.2 test reportSubject to order agreement
EN 10204 3.1 inspection certificateSubject to order agreement
Dimensional inspection reportSubject to order agreement
Coating reportSubject to order agreement
Other documentationSubject to order agreement

Batch documents are not automatically included: specify your requirements in the RFQ.

ISO, DIN and UNI: key differences

DIN 6912

DIN 6912 identifies the pilot-recess configuration. Confirm commercial dimensions with supply tolerances and specifications; it is not equivalent to DIN 7984 without a pilot recess.

RFQ · DIN 6912

Configure your enquiry

Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.

Requested documents

The size you need, including custom specifications

Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.

Send your specification →

Variants

Dueemme Sidol
Panoramica privacy

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.