UNI 5587

High hexagon nut · commercial UNI series

Commercial high hexagon nuts with nominal height equal to diameter in the sizes tabulated here. For maintenance and new supply, check the width across flats and UNI specification instead of automatically substituting ISO 4033.

ISO 4033

Dimensional range
M6–M48
Thread
Metric · coarse pitch
Configuration
Commercial series · nominal height 1d
References
ISO 4033
High hexagon nut · commercial UNI series

Technical drawing

Technical drawing UNI 5587
d
nominal diameter
P
coarse pitch
s
width across flats
m
nominal height

Variants and dimensional data

13 configured commercial sizes from M6 to M48, listed in the table. Not every intermediate size is included; other diameters, pitches and finishes on request.

Dimensions in mm. Identification drawing, not a manufacturing drawing.

MPitch Psm
61106
81.25138
1422214
1622416
182.52718
202.53020
2734127
303.54630
333.55033
3645536
3946039
454.57045
4857548

Commercial class |8| is specified to DIN 267-4: retain the supply mechanical specification. Similar marking alone does not establish ISO 898-2 conformity.

Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.

Materials, classes, finishes and treatments

Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.

Execution referenceMaterialClass / hardnessDocumented finishes
UNI 5587SteelTo be specifiedBlack oxide; GEOMET 321A; Hot-dip galvanized; Plain; Trivalent iridescent zinc plated; Yellow zinc plated; Yellow zinc plated Cr III 12 µm with sealer; Zinc plated; Zinc plated ≥12 µm; Zinc plated ≥8 µm; Zinc plated ≥9 µm
UNI 5587Stainless A2To be specifiedTo be specified
UNI 5587Steel10GEOMET 321A; Hot-dip galvanized; Plain; Yellow zinc plated; Zinc plated
ISO 8674Steel10GEOMET 321A
UNI 5587Stainless A4To be specifiedTo be specified
UNI 5587Stainless A480To be specified
ISO 4033Steel10GEOMET 321A; Zinc plated
UNI 5587BrassNot applicableNickel plated; To be specified; Zinc plated
UNI 5587Brass OT58Not applicableTo be specified

“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.

Documentation

Download Dueemme data sheet ↓
DocumentStatus
Declaration of conformitySubject to order agreement
Material certificateSubject to order agreement
EN 10204 2.2 test reportSubject to order agreement
EN 10204 3.1 inspection certificateSubject to order agreement
Dimensional inspection reportSubject to order agreement
Coating reportSubject to order agreement
Other documentationSubject to order agreement

Batch documents are not automatically included: specify your requirements in the RFQ.

ISO, DIN and UNI: key differences

UNI 5587

Commercial UNI 5587 reference. Specify dimensions, property class to the stated specification and finish in the order. This table is not presented as ISO 4033.

ISO 4033:2023

Related commercial series with its own geometry. Examples: M10 has 17 mm flats in the commercial UNI series and 16 mm in ISO; M16 is 16 mm high in UNI and up to 16.4 mm in the ISO selection. Compare before substitution.

RFQ · UNI 5587

Configure your enquiry

Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.

Requested documents

Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.

The size you need, including custom specifications

Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.

Send your specification →

Variants

Dueemme Sidol
Panoramica privacy

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.