DIN 6334
DIN 6334 identifies the commercial product family. Nominal dimensions are provided for selection; agree tolerances and supply requirements. No ISO/UNI equivalence is declared.
A hexagonal sleeve with a through internal thread for connecting two aligned threaded components. Its extended body accepts engagement from both ends; specify the material, property class and engagement depth for the joint.


Commercial reference geometry M6–M36, height m = 3d. Submit your specification for different heights, other diameters or special threads.
Dimensions in mm. Identification drawing, not a manufacturing drawing.
| M | Pitch P | s | m |
|---|---|---|---|
| 6 | 1 | 10 | 18 |
| 8 | 1.25 | 13 | 24 |
| 10 | 1.5 | 17 | 30 |
| 12 | 1.75 | 19 | 36 |
| 14 | 2 | 22 | 42 |
| 16 | 2 | 24 | 48 |
| 18 | 2.5 | 27 | 54 |
| 20 | 2.5 | 30 | 60 |
| 22 | 2.5 | 32 | 66 |
| 24 | 3 | 36 | 72 |
| 27 | 3 | 41 | 81 |
| 30 | 3.5 | 46 | 90 |
| 33 | 3.5 | 50 | 99 |
| 36 | 4 | 55 | 108 |
The 3d height is not a load rating. Define effective engagement for each component so that neither occupies the length required by the other. Confirm property class, thread tolerance, alignment and finish before use.
Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.
Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.
| Execution reference | Material | Class / hardness | Documented finishes |
|---|---|---|---|
| DIN 6334 | Stainless A2 | To be specified | To be specified |
| DIN 6334 | Steel | 10 | Plain; Zinc plated |
| DIN 6334 | Stainless A4 | To be specified | To be specified |
| sim. DIN 6334 | Stainless A5 · 1.4571 | To be specified | To be specified |
| sim. DIN 6334 | Duplex · 1.4462 | To be specified | To be specified |
| sim. DIN 6334 | Stainless HCR · 1.4529 | To be specified | To be specified |
“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.
| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
DIN 6334 identifies the commercial product family. Nominal dimensions are provided for selection; agree tolerances and supply requirements. No ISO/UNI equivalence is declared.
Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.
Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.
Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.
Send your specification →