Lined and unlined pipe clamps
EPDM and silicone-lined clamps, unlined metal designs, stainless steel, copper and polymer clips. Compare configurations and dimensions and prepare a technical enquiry for your installation.

Explore by family

EPDM-lined pipe clamps
The EPDM liner introduces an elastomeric layer between pipe and clamp. It limits rigid contact and vibration transfer through the connection; acoustic performance depends on the complete installation.
Explore →
Heavy-duty lined clamps
Heavy-duty lined designs combine a reinforced metal band with an elastomeric insert. Nut, sleeve and side screws distinguish configurations that are not interchangeable based solely on diameter.
Explore →
Silicone-lined pipe clamps
A silicone liner is an alternative selected according to temperature and circuit conditions. Red identifies the illustrated design but does not itself establish material classification or fire resistance.
Explore →
Stainless steel lined clamps
The stainless body and elastomeric liner serve different functions: environmental resistance and separation of pipe from metal. Check body, nut, screws and liner separately.
Explore →
Lined clamps for plastic pipes
Plastic pipes require control of local pressure and thermal movement. Lined designs with spacers help establish the clamping configuration specified for the system.
Explore →
Unlined metal pipe clamps
Unlined clamps connect the pipe directly to the metal body. Assess the absence of a liner against pipe finish, contact corrosion, expansion and acoustic requirements.
Explore →
Heavy-duty metal pipe clamps
Larger band sections and dedicated connections provide configurations for demanding pipe supports. Load transfer involves clamp, threaded connection, bracket and anchorage.
Explore →
Copper and nickel-plated copper clamps
Copper or nickel-plated copper bodies form a separate option from zinc-plated steel designs. Compatibility must also cover rods, screws and contact surfaces.
Explore →
Plastic pipe clamps and clips
Polymer clamps and clips retain lightweight pipes with snap, saddle or screw designs. PA and PP remain different materials and do not automatically share thermal, UV or fire behaviour.
Explore →
Downpipe clamps
Downpipe designs may be round or square, zinc-plated, pre-painted or copper. Downpipe geometry must be distinguished from the plug diameter in the substrate.
Explore →
Flue pipe clamps
Flue clamps support or retain the duct according to a specific geometry. Round or square shape, finish and substrate connection form part of the configuration.
Explore →
Ventilation duct clamps
Air ducts use large-diameter clamps with or without a liner. An EPDM liner may separate duct from metal; the support connection must accommodate weight, vibration and installation.
Explore →Pipe clamp finder
Select actual outside diameter, liner, material and connection. Missing dimensions are not inferred from a part number or DN.
Request technical review or a quotation
FAQ
How do lined and unlined pipe clamps differ?
A lined clamp introduces an elastomer between pipe and metal. An unlined clamp provides direct contact. A rubber insert alone does not guarantee a system noise-reduction value.
Should I select by DN or outside diameter?
Measure the actual pipe outside diameter and compare it with the clamping range. DN and nominal inch sizes must not automatically be converted into clamping diameter.
Does a heavy-duty clamp have the same capacity in every size?
No. Verification depends on clamp, screws, connection, rod, bracket, anchorage, orientation and system actions. Request data for the specific configuration.
Is a flue support clamp also a firestop collar?
No. Supporting a duct and providing a fire-resistant penetration seal are different functions with separate documentation and verification.
How do I prepare a technical enquiry?
Provide the family or sheet reference, pipe outside diameter and material, quantity, liner, connection, substrate, temperature, environment and loads or design requirements.
Related pages and documentation
Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.
Stainless pipe clamp · existing catalogue sheet · Anchors and fixings · Tecfi · clamps and fixings
Dueemme Sidol S.r.l. · Sesto San Giovanni, Milano · Supply for industrial customers and OEMs.