Dueemme Sidol · Pipe supports

Unlined metal pipe clamps

Unlined clamps connect the pipe directly to the metal body. Assess the absence of a liner against pipe finish, contact corrosion, expansion and acoustic requirements.

Unlined metal pipe clamps · CF01
Representative type image

Characteristics and selection criteria

Selection includes closing geometry, connection and anchorage. A kit with a plug also requires checks of substrate, depth and installation conditions.

Selection information

Installation and connection checks

Identify the configuration, check the complete load path to the substrate and apply the design-specific installation sequence. Avoid excessive liner compression and separately verify sliding-support or fixed-point operation.

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Series and technical tables

Zinc-plated clamp with welded nutZinc-plated clamp with welded nutDM-CM01 · 7 configurationsDescription and technical table ↓
Zinc-plated clamp with welded nut
Representative type image; use the table for the specific design and dimensions.

Characteristics

Unlined clamps connect the pipe directly to the metal body. Assess the absence of a liner against pipe finish, contact corrosion, expansion and acoustic requirements.

Body material: Steel. Liner: Unlined.

Selection includes closing geometry, connection and anchorage. A kit with a plug also requires checks of substrate, depth and installation conditions.

Use the configuration reference and size in your technical enquiry.

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Zinc-plated clamp with welded nut · DM-CM01
ReferenceD [mm]D ["]GB [mm]H [mm]b x s [mm]
DM-CM01-0114-183/8M8542620 x 1,5
DM-CM01-0220-241/2M8613220 x 1,5
DM-CM01-0323-283/4M8663520 x 1,5
DM-CM01-0432-351”M8744220 x 1,5
DM-CM01-0539-4411/4M8815020 x 2,0
DM-CM01-0644-5311/2M8875420 x 2,0
DM-CM01-0756-652”M81006620 x 2,0

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Hammer-in fixing clampHammer-in fixing clampDM-CM02 · 13 configurationsDescription and technical table ↓
Hammer-in fixing clamp
Representative type image; use the table for the specific design and dimensions.

Characteristics

Unlined clamps connect the pipe directly to the metal body. Assess the absence of a liner against pipe finish, contact corrosion, expansion and acoustic requirements.

Body material: Polyamide / nylon. Liner: Unlined.

Selection includes closing geometry, connection and anchorage. A kit with a plug also requires checks of substrate, depth and installation conditions.

Use the configuration reference and size in your technical enquiry.

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Hammer-in fixing clamp · DM-CM02
ReferenceFor pipes ØL [mm]D [mm]S [mm]
DM-CM02-0114-15313318
DM-CM02-0216-17313520
DM-CM02-0318-19313720
DM-CM02-0420-21313820
DM-CM02-0522-23314120
DM-CM02-0625-26314420
DM-CM02-0728-29314720
DM-CM02-0830-32314920
DM-CM02-0916-17314320
DM-CM02-1018-19315020
DM-CM02-1120-21315420
DM-CM02-1222-23315820
DM-CM02-1325-26316820

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Light clamp with M6 connectionLight clamp with M6 connectionDM-CM03 · 14 configurationsDescription and technical table ↓
Light clamp with M6 connection
Representative type image; use the table for the specific design and dimensions.

Characteristics

Unlined clamps connect the pipe directly to the metal body. Assess the absence of a liner against pipe finish, contact corrosion, expansion and acoustic requirements.

Body material: Steel. Liner: Unlined.

Selection includes closing geometry, connection and anchorage. A kit with a plug also requires checks of substrate, depth and installation conditions.

Use the configuration reference and size in your technical enquiry.

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Light clamp with M6 connection · DM-CM03
ReferenceGD [mm]H [mm]B [mm]b x s [mm]
DM-CM03-01M610243511×1,5
DM-CM03-02M612273711×1,5
DM-CM03-03M614243911×1,5
DM-CM03-04M616314111×1,5
DM-CM03-05M618324211×1,5
DM-CM03-06M620354511×1,5
DM-CM03-07M622374711×1,5
DM-CM03-08M625-26405111×1,5
DM-CM03-09M628435311×1,5
DM-CM03-10M632465711×1,5
DM-CM03-11M638-40556511×1,5
DM-CM03-12M642566711×1,5
DM-CM03-13M650657811×1,5
DM-CM03-14M660799111×1,5

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Clamp with fixing assembly for perforated substratesClamp with fixing assembly for perforated substratesDM-CM04 · 7 configurationsDescription and technical table ↓
Clamp with fixing assembly for perforated substrates
Representative type image; use the table for the specific design and dimensions.

Characteristics

Unlined clamps connect the pipe directly to the metal body. Assess the absence of a liner against pipe finish, contact corrosion, expansion and acoustic requirements.

Body material: Steel. Liner: Unlined.

Selection includes closing geometry, connection and anchorage. A kit with a plug also requires checks of substrate, depth and installation conditions.

Use the configuration reference and size in your technical enquiry.

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Clamp with fixing assembly for perforated substrates · DM-CM04
ReferenceD [mm]Size [“]GB [mm]H [mm]b x s [mm]
DM-CM04-0115-193/8M8542620 x 2,0
DM-CM04-0221-231/2M8613220 x 2,0
DM-CM04-0326-283/4M8663520 x 2,0
DM-CM04-0432-351M8744220 x 2,0
DM-CM04-0540-431 1/4M8815020 x 2,0
DM-CM04-0644-501 1/2M8875420 x 2,0
DM-CM04-0757-612M81006620 x 2,0

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Unlined metal pipe clamps · CF01Unlined metal pipe clamps · CF01Tecfi · CF01 · 10 configurationsDescription and technical table ↓
Unlined metal pipe clamps · CF01
Tecfi series reference image.

Characteristics

Unlined clamps connect the pipe directly to the metal body. Assess the absence of a liner against pipe finish, contact corrosion, expansion and acoustic requirements.

Body material: Steel. Liner: Unlined.

Selection includes closing geometry, connection and anchorage. A kit with a plug also requires checks of substrate, depth and installation conditions.

Tecfi · series sheet ↗

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Unlined metal pipe clamps · CF01 · CF01
ReferencePlug diameter Ø (mm)Plug length L (mm)Pipe size Ø (")G
CF 01 00 03810503/8”M8
CF 01 00 01210501/2”M8
CF 01 00 03410503/4”M8
CF 01 00 00110501”M8
CF 01 00 11410501-1/4”M8
CF 01 00 11210501-1/2”M8
CF 01 00 00210502”M8
CF 01 00 21210502-1/2”M8
CF 01 00 00310503”M8
CF 01 00 00410504”M8

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Pipe clamp finder

Select actual outside diameter, liner, material and connection. Missing dimensions are not inferred from a part number or DN.

Request technical review or a quotation

The summary is transferred to the technical form for review and submission.

FAQ

How do lined and unlined pipe clamps differ?

A lined clamp introduces an elastomer between pipe and metal. An unlined clamp provides direct contact. A rubber insert alone does not guarantee a system noise-reduction value.

Should I select by DN or outside diameter?

Measure the actual pipe outside diameter and compare it with the clamping range. DN and nominal inch sizes must not automatically be converted into clamping diameter.

Does a heavy-duty clamp have the same capacity in every size?

No. Verification depends on clamp, screws, connection, rod, bracket, anchorage, orientation and system actions. Request data for the specific configuration.

Is a flue support clamp also a firestop collar?

No. Supporting a duct and providing a fire-resistant penetration seal are different functions with separate documentation and verification.

How do I prepare a technical enquiry?

Provide the family or sheet reference, pipe outside diameter and material, quantity, liner, connection, substrate, temperature, environment and loads or design requirements.

Related pages and documentation

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Stainless pipe clamp · existing catalogue sheet · Anchors and fixings · Tecfi · clamps and fixings

Dueemme Sidol S.r.l. · Sesto San Giovanni, Milano · Supply for industrial customers and OEMs.

Dueemme Sidol
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.