Dueemme Sidol · Pipe supports

Plastic pipe clamps and clips

Polymer clamps and clips retain lightweight pipes with snap, saddle or screw designs. PA and PP remain different materials and do not automatically share thermal, UV or fire behaviour.

Plastic pipe clamps and clips · ADY01
Representative type image

Characteristics and selection criteria

Check actual outside diameter, usable opening, closure method and substrate. A declaration for one polymer does not extend to every similarly shaped clip.

Selection information

Installation and connection checks

Identify the configuration, check the complete load path to the substrate and apply the design-specific installation sequence. Avoid excessive liner compression and separately verify sliding-support or fixed-point operation.

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Series and technical tables

Polypropylene pipe-retaining clampPolypropylene pipe-retaining clampDM-CP01 · 13 configurationsDescription and technical table ↓
Polypropylene pipe-retaining clamp
Representative type image; use the table for the specific design and dimensions.

Characteristics

Polymer clamps and clips retain lightweight pipes with snap, saddle or screw designs. PA and PP remain different materials and do not automatically share thermal, UV or fire behaviour.

Body material: Polypropylene. Liner: Unlined.

Check actual outside diameter, usable opening, closure method and substrate. A declaration for one polymer does not extend to every similarly shaped clip.

Use the configuration reference and size in your technical enquiry.

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Polypropylene pipe-retaining clamp · DM-CP01
Referenceh2 [mm]b [mm]h1[mm]D [mm]
DM-CP01-0111322416
DM-CP01-0211322520
DM-CP01-0312412625
DM-CP01-0411493032
DM-CP01-05—584340
DM-CP01-06—694750
DM-CP01-07—845763
DM-CP01-08—1266475
DM-CP01-09—1437390
DM-CP01-10—16385110
DM-CP01-11—183117—
DM-CP01-12—199132—
DM-CP01-13—220150—

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Nylon clamp for copper pipeNylon clamp for copper pipeDM-CP02 · 16 configurationsDescription and technical table ↓
Nylon clamp for copper pipe
Representative type image; use the table for the specific design and dimensions.

Characteristics

Polymer clamps and clips retain lightweight pipes with snap, saddle or screw designs. PA and PP remain different materials and do not automatically share thermal, UV or fire behaviour.

Body material: Polyamide / nylon. Liner: Unlined.

Check actual outside diameter, usable opening, closure method and substrate. A declaration for one polymer does not extend to every similarly shaped clip.

Use the configuration reference and size in your technical enquiry.

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Nylon clamp for copper pipe · DM-CP02
ReferenceD [mm]
DM-CP02-0110
DM-CP02-0212
DM-CP02-0314
DM-CP02-0416
DM-CP02-0518
DM-CP02-0620
DM-CP02-0722
DM-CP02-0828
DM-CP02-0932
DM-CP02-1014
DM-CP02-1116
DM-CP02-1218
DM-CP02-1320
DM-CP02-1422
DM-CP02-1528
DM-CP02-1632

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Self-closing polyamide pipe clampSelf-closing polyamide pipe clampDM-CP03 · 19 configurationsDescription and technical table ↓
Self-closing polyamide pipe clamp
Representative type image; use the table for the specific design and dimensions.

Characteristics

Polymer clamps and clips retain lightweight pipes with snap, saddle or screw designs. PA and PP remain different materials and do not automatically share thermal, UV or fire behaviour.

Body material: Polyamide / nylon. Liner: Unlined.

Check actual outside diameter, usable opening, closure method and substrate. A declaration for one polymer does not extend to every similarly shaped clip.

This polyamide design lists a −40 to +90 °C range. This value does not extend to other polymer clips.

Use the configuration reference and size in your technical enquiry.

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Self-closing polyamide pipe clamp · DM-CP03
ReferenceD [mm]D ["]D [DN]B [mm]H [mm]
DM-CP03-019,5-121/862932
DM-CP03-0211,5-151/482934
DM-CP03-0314-16,5——2936
DM-CP03-0416-203/8102940
DM-CP03-0519,5 -23,51/2152944
DM-CP03-0624-283/4—4050
DM-CP03-0728-323/4—4053
DM-CP03-0831,2-35,81—4057
DM-CP03-0935-40,1—254366
DM-CP03-1040-441 1/4—4770
DM-CP03-1144-50—325276
DM-CP03-1248-551 1/2—5781
DM-CP03-1359-652406394
DM-CP03-149,5 – 121/862932
DM-CP03-1511,5 – 151/482934
DM-CP03-1614-16,5——2936
DM-CP03-1716-203/8102940
DM-CP03-1819,5-23,51/2152944
DM-CP03-1928-32——4053

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Plastic pipe clamps and clips · ADY01Plastic pipe clamps and clips · ADY01Tecfi · ADY01 · 6 configurationsDescription and technical table ↓
Plastic pipe clamps and clips · ADY01
Tecfi series reference image.

Characteristics

Polymer clamps and clips retain lightweight pipes with snap, saddle or screw designs. PA and PP remain different materials and do not automatically share thermal, UV or fire behaviour.

Body material: Polyamide / nylon. Liner: Unlined.

Check actual outside diameter, usable opening, closure method and substrate. A declaration for one polymer does not extend to every similarly shaped clip.

Tecfi · series sheet ↗

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Plastic pipe clamps and clips · ADY01 · ADY01
ReferencePipe size Ø (mm)
ADY 01 00 01616
ADY 01 00 02020
ADY 01 00 02525
ADY 01 00 03232
ADY 01 00 04040
ADY 01 00 05050

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Pipe clamp finder

Select actual outside diameter, liner, material and connection. Missing dimensions are not inferred from a part number or DN.

Request technical review or a quotation

The summary is transferred to the technical form for review and submission.

FAQ

How do lined and unlined pipe clamps differ?

A lined clamp introduces an elastomer between pipe and metal. An unlined clamp provides direct contact. A rubber insert alone does not guarantee a system noise-reduction value.

Should I select by DN or outside diameter?

Measure the actual pipe outside diameter and compare it with the clamping range. DN and nominal inch sizes must not automatically be converted into clamping diameter.

Does a heavy-duty clamp have the same capacity in every size?

No. Verification depends on clamp, screws, connection, rod, bracket, anchorage, orientation and system actions. Request data for the specific configuration.

Is a flue support clamp also a firestop collar?

No. Supporting a duct and providing a fire-resistant penetration seal are different functions with separate documentation and verification.

How do I prepare a technical enquiry?

Provide the family or sheet reference, pipe outside diameter and material, quantity, liner, connection, substrate, temperature, environment and loads or design requirements.

Related pages and documentation

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Stainless pipe clamp · existing catalogue sheet · Anchors and fixings · Tecfi · clamps and fixings

Dueemme Sidol S.r.l. · Sesto San Giovanni, Milano · Supply for industrial customers and OEMs.

Dueemme Sidol
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.