Dueemme Sidol · Pipe supports

Lined clamps for plastic pipes

Plastic pipes require control of local pressure and thermal movement. Lined designs with spacers help establish the clamping configuration specified for the system.

Lined clamp with spacers for plastic pipes
Representative type image

Characteristics and selection criteria

Distinguish sliding support from a fixed point: tightening the same clamp harder does not establish either function. Consider pipe material, temperature and pipe-system instructions.

Selection information

Installation and connection checks

Identify the configuration, check the complete load path to the substrate and apply the design-specific installation sequence. Avoid excessive liner compression and separately verify sliding-support or fixed-point operation.

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Series and technical tables

Lined clamp with spacers for plastic pipesLined clamp with spacers for plastic pipesDM-CI09 · 11 configurationsDescription and technical table ↓
Lined clamp with spacers for plastic pipes
Representative type image; use the table for the specific design and dimensions.

Characteristics

Plastic pipes require control of local pressure and thermal movement. Lined designs with spacers help establish the clamping configuration specified for the system.

Body material: Steel. Liner: EPDM.

Distinguish sliding support from a fixed point: tightening the same clamp harder does not establish either function. Consider pipe material, temperature and pipe-system instructions.

Removable spacers and an EPDM liner with a smooth inner surface are specified. Check the support function against pipe expansion.

Use the configuration reference and size in your technical enquiry.

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Lined clamp with spacers for plastic pipes · DM-CI09
ReferenceD [mm]GB [mm]H [mm]b x s [mm]Side screws
DM-CI09-0116M8/M10484020×1,001
DM-CI09-0220M8/M10554320×1,001
DM-CI09-0325M8/M10604820×1,001
DM-CI09-0432M8/M10675720×1,001
DM-CI09-0540M8/M10756620×1,251
DM-CI09-0650M8/M10857520×1,251
DM-CI09-0763M101099420×2,002
DM-CI09-0875M1011710623×1,502
DM-CI09-0990M1013412023×2,002
DM-CI09-10110M1015714023×2,002
DM-CI09-11160M1020318823×2,002

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Pipe clamp finder

Select actual outside diameter, liner, material and connection. Missing dimensions are not inferred from a part number or DN.

Request technical review or a quotation

The summary is transferred to the technical form for review and submission.

FAQ

How do lined and unlined pipe clamps differ?

A lined clamp introduces an elastomer between pipe and metal. An unlined clamp provides direct contact. A rubber insert alone does not guarantee a system noise-reduction value.

Should I select by DN or outside diameter?

Measure the actual pipe outside diameter and compare it with the clamping range. DN and nominal inch sizes must not automatically be converted into clamping diameter.

Does a heavy-duty clamp have the same capacity in every size?

No. Verification depends on clamp, screws, connection, rod, bracket, anchorage, orientation and system actions. Request data for the specific configuration.

Is a flue support clamp also a firestop collar?

No. Supporting a duct and providing a fire-resistant penetration seal are different functions with separate documentation and verification.

How do I prepare a technical enquiry?

Provide the family or sheet reference, pipe outside diameter and material, quantity, liner, connection, substrate, temperature, environment and loads or design requirements.

Related pages and documentation

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Stainless pipe clamp · existing catalogue sheet · Anchors and fixings · Tecfi · clamps and fixings

Dueemme Sidol S.r.l. · Sesto San Giovanni, Milano · Supply for industrial customers and OEMs.

Dueemme Sidol
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.