Dueemme Sidol · Pipe supports

Heavy-duty metal pipe clamps

Larger band sections and dedicated connections provide configurations for demanding pipe supports. Load transfer involves clamp, threaded connection, bracket and anchorage.

Heavy-duty metal pipe clamps · DL01
Representative type image

Characteristics and selection criteria

Check each component in the load path. Values for one configuration do not apply to a different connection, orientation or larger lever arm.

Selection information

Installation and connection checks

Identify the configuration, check the complete load path to the substrate and apply the design-specific installation sequence. Avoid excessive liner compression and separately verify sliding-support or fixed-point operation.

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Series and technical tables

Heavy clamp with metric nutHeavy clamp with metric nutDM-CM05 · 14 configurationsDescription and technical table ↓
Heavy clamp with metric nut
Representative type image; use the table for the specific design and dimensions.

Characteristics

Larger band sections and dedicated connections provide configurations for demanding pipe supports. Load transfer involves clamp, threaded connection, bracket and anchorage.

Body material: Steel. Liner: Unlined.

Check each component in the load path. Values for one configuration do not apply to a different connection, orientation or larger lever arm.

Use the configuration reference and size in your technical enquiry.

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Heavy clamp with metric nut · DM-CM05
ReferenceD [mm]D ["]GB [mm]H [mm]b x s [mm]
DM-CM05-01401 1/4M10785230 x 2,50
DM-CM05-02501 1/2M10905930 x 2,50
DM-CM05-03632M101037330 x 2,50
DM-CM05-0474-812 1/2M1010910625 x 3,00
DM-CM05-0580—M1011510830 x 2,50
DM-CM05-0685-913M1014710925 x 3,00
DM-CM05-0798-1063 1/2M1013911130 x 2,50
DM-CM05-08108-1154M1017112125 x 3,00
DM-CM05-09124-133—M1016413930 x 2,50
DM-CM05-10132-1415M1018015030 x 2,50
DM-CM05-11159-1696M1020017030 x 2,50
DM-CM05-12192-202—M1023921130 x 2,50
DM-CM05-13250—M1034224530 x 3,00
DM-CM05-1431512M1042031030 x 3,00

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Heavy clamp with half-sleeve connectionHeavy clamp with half-sleeve connectionDM-CM06 · 14 configurationsDescription and technical table ↓
Heavy clamp with half-sleeve connection
Representative type image; use the table for the specific design and dimensions.

Characteristics

Larger band sections and dedicated connections provide configurations for demanding pipe supports. Load transfer involves clamp, threaded connection, bracket and anchorage.

Body material: Steel. Liner: Unlined.

Check each component in the load path. Values for one configuration do not apply to a different connection, orientation or larger lever arm.

Use the configuration reference and size in your technical enquiry.

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Heavy clamp with half-sleeve connection · DM-CM06
ReferenceSize Ø [mm]Screw (Ø x L) [mm]Width x Thickness [mm]
DM-CM06-0140M6 x 2230 x 2,50
DM-CM06-0250M6 x 2230 x 2,50
DM-CM06-0363M6 x 2230 x 2,50
DM-CM06-0475M6 x 2230 x 2,50
DM-CM06-0580M6 x 2230 x 2,50
DM-CM06-0690M6 x 2230 x 2,50
DM-CM06-07100M6 x 2230 x 2,50
DM-CM06-08110M6 x 2225 x 3,00
DM-CM06-09125M6 x 2230 x 2,50
DM-CM06-10140M6 x 2230 x 2,50
DM-CM06-11160M6 x 2230 x 2,50
DM-CM06-12200M6 x 2230 x 2,50
DM-CM06-13250M8 x 3530 x 3,00
DM-CM06-14315M8 x 3530 x 3,00

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Extra-heavy clamp with sleeve connectionExtra-heavy clamp with sleeve connectionDM-CM07 · 16 configurationsDescription and technical table ↓
Extra-heavy clamp with sleeve connection
Representative type image; use the table for the specific design and dimensions.

Characteristics

Larger band sections and dedicated connections provide configurations for demanding pipe supports. Load transfer involves clamp, threaded connection, bracket and anchorage.

Body material: Steel. Liner: Unlined.

Check each component in the load path. Values for one configuration do not apply to a different connection, orientation or larger lever arm.

Use the configuration reference and size in your technical enquiry.

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Extra-heavy clamp with sleeve connection · DM-CM07
ReferenceD [mm]D ["]D [DN]G ["]B [mm]H [mm]b x s [mm]
DM-CM07-0174-812 1/2651/213610330×3,0
DM-CM07-0288-973801/215211730×3,0
DM-CM07-0393-100——1/216513130×3,0
DM-CM07-04110-11841001/217514130×3,0
DM-CM07-05116-126——1/219315830×3,0
DM-CM07-06144-154——1/221517930×3,0
DM-CM07-07160-16961501/224019540×4,0
DM-CM07-08199-205——1/227424040×4,0
DM-CM07-09219-23082001/229925340×4,0
DM-CM07-10245-255——1/233528040×4,0
DM-CM07-11273-283102501/236031540×4,0
DM-CM07-12317-333123001/240334850×5,0
DM-CM07-13349-365143501/243935850×5,0
DM-CM07-14398-414164001/248743350×5,0
DM-CM07-15450-466205001/253748350×5,0
DM-CM07-16501-517205001/258853450×5,0

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Extra-heavy clamp with nut connectionExtra-heavy clamp with nut connectionDM-CM08 · 24 configurationsDescription and technical table ↓
Extra-heavy clamp with nut connection
Representative type image; use the table for the specific design and dimensions.

Characteristics

Larger band sections and dedicated connections provide configurations for demanding pipe supports. Load transfer involves clamp, threaded connection, bracket and anchorage.

Body material: Steel. Liner: Unlined.

Check each component in the load path. Values for one configuration do not apply to a different connection, orientation or larger lever arm.

Use the configuration reference and size in your technical enquiry.

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Extra-heavy clamp with nut connection · DM-CM08
ReferenceD [mm]D ["]D [DN]B [mm]H [mm]b x s [mm]G
DM-CM08-0120-241/215785030 x 2,5—
DM-CM08-0223-283/420845730 x 2,5M10/M12
DM-CM08-0331-36125916330 x 2,5M10/M12
DM-CM08-0438-441 1/4321017230 x 2,5M10/M12
DM-CM08-0548-531 2 /2401097930 x 2,5M10/M12
DM-CM08-0654-60——1158530 x 2,5M12
DM-CM08-0759-662501229230 x 2,5M10/M12
DM-CM08-0874-802 1/26513611530 x 3,0M10/M12
DM-CM08-0987-943801297830 x 3,0M10/M12
DM-CM08-10101-109——16514330 x 3,0M12
DM-CM08-11108-116410017515330 x 3,0M10/M12
DM-CM08-12116-126——19317030 x 3,0M12
DM-CM08-13136-145512520017730 x 3,0M10/M12
DM-CM08-14144-154——21519130 x 3,0M16
DM-CM08-15162-168615024020740 x 4,0M10/M12
DM-CM08-16199-205——27424040 x 4,0M16
DM-CM08-17206-220820029926340 x 4,0M10/M12
DM-CM08-18245-255——32227740 x 4,0M16
DM-CM08-19273-2831025036031540 x 4,0M16
DM-CM08-20317-3331230040335850 x 5,0M16
DM-CM08-21349-3651435043939550 x 5,0M16
DM-CM08-22398-4141640048744350 x 5,0M16
DM-CM08-23450-4661845053749350 x 5,0M16
DM-CM08-24501-5172050058854450 x 5,0M16

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Heavy-duty metal pipe clamps · CFEV01Heavy-duty metal pipe clamps · CFEV01Tecfi · CFEV01 · 10 configurationsDescription and technical table ↓
Heavy-duty metal pipe clamps · CFEV01
Tecfi series reference image.

Characteristics

Larger band sections and dedicated connections provide configurations for demanding pipe supports. Load transfer involves clamp, threaded connection, bracket and anchorage.

Body material: Steel. Liner: Unlined.

Check each component in the load path. Values for one configuration do not apply to a different connection, orientation or larger lever arm.

Tecfi · series sheet ↗

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Heavy-duty metal pipe clamps · CFEV01 · CFEV01
ReferencePlug diameter Ø (mm)Plug length L (mm)
CFEV 01 08 0381060
CFEV 01 08 0121060
CFEV 01 08 0341060
CFEV 01 08 0011060
CFEV 01 08 1141060
CFEV 01 08 1121060
CFEV 01 08 0021060
CFEV 01 10 2121260
CFEV 01 10 0031260
CFEV 01 10 0041260

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Heavy-duty metal pipe clamps · DL01Heavy-duty metal pipe clamps · DL01Tecfi · DL01 · 12 configurationsDescription and technical table ↓
Heavy-duty metal pipe clamps · DL01
Tecfi series reference image.

Characteristics

Larger band sections and dedicated connections provide configurations for demanding pipe supports. Load transfer involves clamp, threaded connection, bracket and anchorage.

Body material: Steel. Liner: Unlined.

Check each component in the load path. Values for one configuration do not apply to a different connection, orientation or larger lever arm.

Tecfi · series sheet ↗

Configuration technical table

Dimensions are in mm where stated; G identifies the listed connection. B, H and other letters retain their configuration-specific definitions: request technical review for the dimensioned drawing. Plug dimensions are not pipe diameter.

Heavy-duty metal pipe clamps · DL01 · DL01
ReferencePlug diameter Ø (mm)Plug length L (mm)Pipe size Ø (mm)G
DL 01 00 040126040M10
DL 01 00 050126050M10
DL 01 00 063126063M10
DL 01 00 075126075M10
DL 01 00 080126080M10
DL 01 00 090126090M10
DL 01 00 1001260100M10
DL 01 00 1101260110M10
DL 01 00 1251260125M10
DL 01 00 1401260140M10
DL 01 00 1601260160M10
DL 01 00 2001260200M10

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Pipe clamp finder

Select actual outside diameter, liner, material and connection. Missing dimensions are not inferred from a part number or DN.

Request technical review or a quotation

The summary is transferred to the technical form for review and submission.

FAQ

How do lined and unlined pipe clamps differ?

A lined clamp introduces an elastomer between pipe and metal. An unlined clamp provides direct contact. A rubber insert alone does not guarantee a system noise-reduction value.

Should I select by DN or outside diameter?

Measure the actual pipe outside diameter and compare it with the clamping range. DN and nominal inch sizes must not automatically be converted into clamping diameter.

Does a heavy-duty clamp have the same capacity in every size?

No. Verification depends on clamp, screws, connection, rod, bracket, anchorage, orientation and system actions. Request data for the specific configuration.

Is a flue support clamp also a firestop collar?

No. Supporting a duct and providing a fire-resistant penetration seal are different functions with separate documentation and verification.

How do I prepare a technical enquiry?

Provide the family or sheet reference, pipe outside diameter and material, quantity, liner, connection, substrate, temperature, environment and loads or design requirements.

Related pages and documentation

Tables checked on 18 November 2026. Values refer to the listed configuration: “—” means unavailable, not zero. DN, nominal inch size and outside diameter in mm are distinct quantities. Availability and component combinations are confirmed through the technical enquiry.

Stainless pipe clamp · existing catalogue sheet · Anchors and fixings · Tecfi · clamps and fixings

Dueemme Sidol S.r.l. · Sesto San Giovanni, Milano · Supply for industrial customers and OEMs.

Dueemme Sidol
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.