UNI 5594
Dimensions of the stated UNI commercial selection. Design may vary with diameter; the illustration identifies the configuration and does not replace a manufacturing drawing.
Castellated hexagon nut for retention by a split pin through a drilled bolt or pin. The low design reduces axial space requirements.
DIN 937


Coarse-pitch sizes are listed in the table. Fine-pitch designs are also available on request: specify diameter × pitch. Other sizes, materials and finishes are defined in the quotation.
Dimensions in mm. Identification drawing, not a manufacturing drawing.
| M | Pitch P | s | e min. | m | de | n |
|---|---|---|---|---|---|---|
| 6 | 1 | 10 | 11.05 | 6.5 | — | 2 |
| 8 | 1.25 | 13 | 14.38 | 8 | — | 2.5 |
| 10 | 1.5 | 17 | 18.9 | 10 | — | 2.8 |
| 12 | 1.75 | 19 | 21.1 | 12 | 17 | 3.5 |
| 14 | 2 | 22 | 24.49 | 13 | 19 | 3.5 |
| 16 | 2 | 24 | 26.75 | 14 | 22 | 4.5 |
| 18 | 2.5 | 27 | 30.14 | 15 | 25 | 4.5 |
| 20 | 2.5 | 30 | 33.53 | 15 | 28 | 4.5 |
| 22 | 2.5 | 32 | 35.72 | 18 | 30 | 5.5 |
| 24 | 3 | 36 | 39.98 | 18 | 34 | 5.5 |
| 27 | 3 | 41 | 45.63 | 20 | 38 | 5.5 |
| 30 | 3.5 | 46 | 51.28 | 21 | 42 | 7 |
| 33 | 3.5 | 50 | 55.8 | 23 | 46 | 7 |
| 36 | 4 | 55 | 61.31 | 23 | 50 | 7 |
| 39 | 4 | 60 | 66.96 | 25 | 55 | 7 |
| 42 | 4.5 | 65 | 72.61 | 28 | 58 | 9 |
| 45 | 4.5 | 70 | 78.26 | 30 | 62 | 9 |
| 48 | 5 | 75 | 83.91 | 30 | 65 | 9 |
The split pin prevents relative rotation after tightening; it does not generate preload. Check the pin hole, split pin and slot alignment against the assembly procedure. Bolt and split pin are not automatically included.
Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.
Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.
| Execution reference | Material | Class / hardness | Documented finishes |
|---|---|---|---|
| UNI 5594 | Steel | 8 | To be specified |
“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.
| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
Dimensions of the stated UNI commercial selection. Design may vary with diameter; the illustration identifies the configuration and does not replace a manufacturing drawing.
Similar commercial reference: compare height, slots and supply specification. Exact dimensional equivalence is not claimed.
Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.
Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.
Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.
Send your specification →