UNI 5593

High slotted castle nut

Castellated hexagon nut for retention by a split pin through a drilled bolt or pin. The high design has greater overall height.

DIN 935

Dimensional range
M8–M56
Thread
Metric · coarse pitch
Configuration
High slotted castle nut
References
DIN 935
High slotted castle nut

Technical drawing

Technical drawing UNI 5593
d
nominal thread
P
pitch
s
width across flats
e
minimum width across corners
m
overall height
de
crown diameter where specified
n
slot width. —: dimension not stated.

Variants and dimensional data

Coarse-pitch sizes are listed in the table. Fine-pitch designs are also available on request: specify diameter × pitch. Other sizes, materials and finishes are defined in the quotation.

Dimensions in mm. Identification drawing, not a manufacturing drawing.

MPitch Pse min.mden
81.251314.389.5—2.5
101.51718.912—2.8
121.751921.115173.5
1422224.4916193.5
1622426.7519224.5
182.52730.1421254.5
202.53033.5322284.5
222.53235.7226305.5
2433639.9827345.5
2734145.6330385.5
303.54651.2833427
333.55055.835467
3645561.3138507
3946066.9640557
424.56572.6146589
454.57078.2648629
4857583.9150659
5258089.5654709
565.58595.0757759

The split pin prevents relative rotation after tightening; it does not generate preload. Check the pin hole, split pin and slot alignment against the assembly procedure. Bolt and split pin are not automatically included.

Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.

Materials, classes, finishes and treatments

Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.

Execution referenceMaterialClass / hardnessDocumented finishes
DIN 935Steel6GEOMET 321A; Plain; Yellow zinc plated; Zinc plated
DIN 935Stainless A2To be specifiedTo be specified

“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.

Documentation

Download Dueemme data sheet ↓
DocumentStatus
Declaration of conformitySubject to order agreement
Material certificateSubject to order agreement
EN 10204 2.2 test reportSubject to order agreement
EN 10204 3.1 inspection certificateSubject to order agreement
Dimensional inspection reportSubject to order agreement
Coating reportSubject to order agreement
Other documentationSubject to order agreement

Batch documents are not automatically included: specify your requirements in the RFQ.

ISO, DIN and UNI: key differences

UNI 5593

Dimensions of the stated UNI commercial selection. Design may vary with diameter; the illustration identifies the configuration and does not replace a manufacturing drawing.

DIN 935

Similar commercial reference: compare height, slots and supply specification. Exact dimensional equivalence is not claimed.

RFQ · UNI 5593

Configure your enquiry

Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.

Requested documents

Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.

The size you need, including custom specifications

Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.

Send your specification →

Variants

Dueemme Sidol
Panoramica privacy

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.