DIN 985
Dimensions refer to the stated DIN selection. Related ISO/UNI references are not automatic equivalents: check pitch and envelope against the required specification.
A nylon insert retained in the upper collar provides prevailing torque during assembly. Coarse- and fine-pitch designs are listed in the table: always specify diameter × pitch.
UNI 7474 · ISO 10511
Commercial class 04 with reduced loadability; do not automatically assign class 8 performance. Non-metallic insert: check temperature, chemicals and coating compatibility. Prevailing torque is not preload. Reuse and acceptance criteria must follow the manufacturer specification; no universal reuse count is assigned.


Reference sizes are listed in the table. Other diameters, pitches, materials and finishes are available on request, subject to an agreed supply specification.
Dimensions in mm. Identification drawing, not a manufacturing drawing.
| M | Pitch P | s | h | m |
|---|---|---|---|---|
| 5 | 0.8 | 8 | 5 | 3.5 |
| 6 | 1 | 10 | 6 | 4.5 |
| 8 | 1.25 | 13 | 8 | 6.5 |
| 8 | 1 | 13 | 8 | 6.5 |
| 10 | 1.5 | 17 | 10 | 8 |
| 10 | 1.25 | 17 | 10 | 8 |
| 12 | 1.75 | 19 | 12 | 10 |
| 12 | 1.25 | 19 | 12 | 10 |
| 14 | 2 | 22 | 14 | 11 |
| 14 | 1.5 | 22 | 14 | 11 |
| 16 | 2 | 24 | 16 | 12.8 |
| 16 | 1.5 | 24 | 16 | 12.8 |
| 18 | 1.5 | 27 | 18.5 | 14.4 |
| 20 | 1.5 | 30 | 20 | 16 |
| 22 | 1.5 | 32 | 22 | 17.6 |
| 24 | 2 | 36 | 24 | 19 |
| 27 | 2 | 41 | 27 | 21.6 |
| 30 | 2 | 46 | 30 | 24 |
| 33 | 2 | 50 | 33 | 24 |
| 36 | 3 | 55 | 36 | 28 |
| 39 | 3 | 60 | 39 | 31 |
| 42 | 3 | 65 | 42 | 33 |
| 45 | 3 | 70 | 45 | 36 |
| 48 | 3 | 75 | 48 | 38 |
Commercial class 04 with reduced loadability; do not automatically assign class 8 performance. Non-metallic insert: check temperature, chemicals and coating compatibility. Prevailing torque is not preload. Reuse and acceptance criteria must follow the manufacturer specification; no universal reuse count is assigned.
Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.
Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.
| Execution reference | Material | Class / hardness | Documented finishes |
|---|---|---|---|
| DIN 985 | Stainless A2 | To be specified | To be specified |
| DIN985 | Brass | Not applicable | To be specified |
| DIN 985 | Brass | Not applicable | To be specified |
| DIN 985 | Stainless A4 | To be specified | To be specified |
| DIN 985 | Steel | 8 | Black oxide; Black zinc plated; GEOMET 321A; Yellow zinc plated; Yellow zinc plated Cr III 12 µm with sealer; Zinc plated |
| DIN 985 | Steel | 10 | Yellow zinc plated; Zinc plated |
| DIN 985 | Stainless A4 | 80 | To be specified |
“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.
| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
Dimensions refer to the stated DIN selection. Related ISO/UNI references are not automatic equivalents: check pitch and envelope against the required specification.
Related reference; compare dimensions, design and mechanical specification before substitution. Exact equivalence is not claimed.
Related coarse-pitch reference; not assigned to the fine-pitch rows of this sheet.
Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.
Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.
Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.
Send your specification →