DIN 982

High nylon-insert lock nut

A nylon insert retained in the upper collar provides prevailing torque during assembly. Coarse- and fine-pitch designs are listed in the table: always specify diameter × pitch.

UNI 7473 · ISO 7040

Dimensional range
M5–M48
Thread
Metric · coarse pitch
Configuration
High nylon-insert lock nut
References
UNI 7473 · ISO 7040
High nylon-insert lock nut

Technical drawing

Technical drawing DIN 982
d
nominal thread
P
pitch
s
width across flats
m
body height
h
overall height
dc
flange diameter. Only columns included in the table apply.

Variants and dimensional data

Reference sizes are listed in the table. Other diameters, pitches, materials and finishes are available on request, subject to an agreed supply specification.

Dimensions in mm. Identification drawing, not a manufacturing drawing.

MPitch Pshm
50.886.33.5
611084.5
81.25139.56.5
81139.56.5
101.51711.58
101.251711.58
1011711.58
121.75191410
121.5191410
121.25191410
142221611
141.5221611
162241812.8
161.5241812.8
181.5272014.4
201.5302216
221.5322517.6
242362819
272413121.6
302463324
332503524
363553928
393604231
423654533
453704736
483755038

Non-metallic insert: check temperature, chemicals and coating compatibility. Prevailing torque is not preload. Reuse and acceptance criteria must follow the manufacturer specification; no universal reuse count is assigned.

Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.

Materials, classes, finishes and treatments

Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.

Execution referenceMaterialClass / hardnessDocumented finishes
DIN 982Steel8Black zinc plated; GEOMET 321A; Geomet 321b; Hot-dip galvanized; Plain; Yellow zinc plated; Yellow zinc plated Cr III 12 µm with sealer; Zinc plated; Zinc plated ≥12 µm
DIN 982SteelTo be specifiedZinc plated
DIN 982Steel10Hot-dip galvanized; Plain; Yellow zinc plated; Yellow zinc plated Cr III 12 µm with sealer; Zinc plated
DIN 982Stainless A2To be specifiedTo be specified
DIN 982Stainless A480To be specified
DIN 982Stainless A4To be specifiedTo be specified
ISO 7040Steel8Zinc plated
DIN 982BrassNot applicableTo be specified

“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.

Documentation

Download Dueemme data sheet ↓
DocumentStatus
Declaration of conformitySubject to order agreement
Material certificateSubject to order agreement
EN 10204 2.2 test reportSubject to order agreement
EN 10204 3.1 inspection certificateSubject to order agreement
Dimensional inspection reportSubject to order agreement
Coating reportSubject to order agreement
Other documentationSubject to order agreement

Batch documents are not automatically included: specify your requirements in the RFQ.

ISO, DIN and UNI: key differences

DIN 982

Dimensions refer to the stated DIN selection. Related ISO/UNI references are not automatic equivalents: check pitch and envelope against the required specification.

UNI 7473

Related reference; compare dimensions, design and mechanical specification before substitution. Exact equivalence is not claimed.

ISO 7040

Related coarse-pitch reference; not assigned to the fine-pitch rows of this sheet.

RFQ · DIN 982

Configure your enquiry

Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.

Requested documents

Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.

The size you need, including custom specifications

Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.

Send your specification →

Variants

Dueemme Sidol
Panoramica privacy

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.