DIN 6923
Dimensions of the specified commercial selection do not replace a manufacturing drawing or the complete supply specification.
An integral flange provides a wider bearing surface; the serrated design engages the supporting surface.
ISO 4161


Reference sizes are listed in the table. Other diameters, pitches, materials and finishes are available on request, subject to an agreed supply specification.
Dimensions in mm. Identification drawing, not a manufacturing drawing.
| M | Pitch P | s | m | dc max. |
|---|---|---|---|---|
| 6 | 1 | 10 | 6 | 14.2 |
| 8 | 1.25 | 13 | 8 | 17.9 |
| 10 | 1.5 | 15 | 10 | 21.8 |
| 12 | 1.75 | 18 | 12 | 26 |
| 14 | 2 | 21 | 14 | 29.9 |
| 16 | 2 | 24 | 16 | 34.5 |
Serrations may mark the substrate or coating. They are not a prevailing-torque insert. Smooth flanges and alternative widths are separate designs to confirm; a flange does not replace a washer required by the joint design.
Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.
Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.
| Execution reference | Material | Class / hardness | Documented finishes |
|---|---|---|---|
| DIN 6923 | Steel | 8 | Black zinc plated; Black zinc-nickel; GEOMET 321A; Geomet 321b; Geomet 500a; Hot-dip galvanized; Plain; Trivalent iridescent zinc plated; Yellow zinc plated; Yellow zinc plated Cr III 12 µm with sealer; Zinc plated; Zinc plated ≥12 µm; Zinc plated ≥12 µm with sealer; Zinc plated ≥8 µm |
| DIN 6923 | Stainless A2 | To be specified | To be specified |
| DIN 6923 | Stainless A4 | To be specified | To be specified |
| DIN 6923 | Steel | To be specified | Black zinc-nickel with sealer; GEOMET 321A |
| ISO 4161 | Steel | To be specified | Yellow zinc plated Cr III 12 µm with sealer |
| DIN 6923 | Steel | 6S | Black zinc-nickel |
| DIN 6923 | Steel | 10 | GEOMET 321A; Hot-dip galvanized; Plain; Zinc plated; Zinc plated and baked |
“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.
| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
Dimensions of the specified commercial selection do not replace a manufacturing drawing or the complete supply specification.
Related reference; compare dimensions, design and mechanical specification before substitution. Exact equivalence is not claimed.
Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.
Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.
Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.
Send your specification →