DIN 6927
Dimensions of the specified commercial selection do not replace a manufacturing drawing or the complete supply specification.
An integral flange and locking system: select by envelope, bearing surface and operating conditions.
ISO 7044


Reference sizes are listed in the table. Other diameters, pitches, materials and finishes are available on request, subject to an agreed supply specification.
Dimensions in mm. Identification drawing, not a manufacturing drawing.
| M | Pitch P | s | dc max. | hMax | m |
|---|---|---|---|---|---|
| 5 | 0.8 | 8 | 11.8 | 7.1 | 4.7 |
| 6 | 1 | 10 | 14.2 | 9.1 | 5.7 |
| 8 | 1.25 | 13 | 17.9 | 11.1 | 7.6 |
| 10 | 1.5 | 15 | 21.8 | 13.5 | 9.6 |
| 12 | 1.75 | 18 | 26 | 16.1 | 11.6 |
| 14 | 2 | 21 | 29.9 | 18.2 | 13.3 |
| 16 | 2 | 24 | 34.5 | 20.3 | 15.3 |
All-metal locking: check coating, lubrication and galling risk. Prevailing torque is not preload. Reuse and acceptance criteria must follow the manufacturer specification; no universal reuse count is assigned.
Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.
Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.
| Execution reference | Material | Class / hardness | Documented finishes |
|---|---|---|---|
| DIN 6927 | Steel | 8 | Geomet 500a; Plain; Zinc plated; Zinc plated ≥12 µm, waxed |
| DIN 6927 | Steel | 10 | GEOMET 321A; Plain; Zinc plated; Zinc plated ≥12 µm, waxed |
“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.
| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
Dimensions of the specified commercial selection do not replace a manufacturing drawing or the complete supply specification.
Related reference; compare dimensions, design and mechanical specification before substitution. Exact equivalence is not claimed.
Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.
Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.
Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.
Send your specification →