DIN 562

Thin square nut

A low-profile square nut for housings with limited axial space. Four flat sides allow location in a dedicated pocket; thread, width and height define the required configuration.

UNI 5596

Dimensional range
M3–M10
Thread
Metric · coarse pitch
Configuration
Square · thin
References
UNI 5596
Thin square nut

Technical drawing

Technical drawing DIN 562
d
nominal thread
P
pitch
s
width across flats
m
height
e
across-corners reference

Variants and dimensional data

Selected M3, M4, M5, M6, M8 and M10 in A2 stainless; A4 configured for M6 and M8. Other diameters and materials on request. Dimensions follow the DIN column of the technical reference, separately from UNI dimensions.

Dimensions in mm. Identification drawing, not a manufacturing drawing.

MPitch Psmekg / 1,000 pcs
30.55.51.87ND
40.772.28.9ND
50.882.710.2ND
61103.212.7ND
81.2513416.5ND
101.516520.2ND

Weight for each size: ND. No weight is transferred from a UNI geometry or another material.

Reduced height limits effective thread engagement. Design the joint for its load and the nut specification; the square shape is not a self-locking feature.

Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.

Materials, classes, finishes and treatments

Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.

Execution referenceMaterialClass / hardnessDocumented finishes
DIN 562Stainless A2To be specifiedTo be specified
UNI 5596Stainless A2To be specifiedTo be specified
DIN 562Stainless A4To be specifiedTo be specified
DIN 562SteelTo be specifiedPlain

“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.

Documentation

Download Dueemme data sheet ↓
DocumentStatus
Declaration of conformitySubject to order agreement
Material certificateSubject to order agreement
EN 10204 2.2 test reportSubject to order agreement
EN 10204 3.1 inspection certificateSubject to order agreement
Dimensional inspection reportSubject to order agreement
Coating reportSubject to order agreement
Other documentationSubject to order agreement

Batch documents are not automatically included: specify your requirements in the RFQ.

ISO, DIN and UNI: key differences

DIN 562

DIN 562 identifies thin square nuts. The table is a commercial selection reference; confirm tolerances, conformity and mechanical requirements for the requested item.

UNI 5596

Related reference with differences: heights differ for M3–M6; for M10 the listed width is 17 mm UNI versus 16 mm DIN. Do not transfer dimensions between the two series.

RFQ · DIN 562

Configure your enquiry

Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.

Requested documents

Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.

The size you need, including custom specifications

Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.

Send your specification →

Variants

Dueemme Sidol
Panoramica privacy

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.