DIN 125 A
DIN 125 A is a historical reference used commercially for plain washers without chamfer. This is the 100 HV steel version; it is not presented as ISO 7089.
A 100 HV steel plain washer without chamfer for use under a bolt head or nut. Select the size and finish in the commercial DIN 125 A series; ISO 7089 versions with 200/300 HV hardness have a separate data sheet.
ISO 7089 · UNI 6592


Tabulated commercial series M2–M60. Nominal M identifies the bolt; bore, outside diameter and thickness are separate dimensions. Other dimensions on request.
Dimensions in mm. Identification drawing, not a manufacturing drawing.
| M | d1 | d2 | s |
|---|---|---|---|
| 2 | 2.2 | 5 | 0.3 |
| 2.5 | 2.7 | 6 | 0.5 |
| 3 | 3.2 | 7 | 0.5 |
| 4 | 4.3 | 9 | 0.8 |
| 5 | 5.3 | 10 | 1 |
| 6 | 6.4 | 12 | 1.6 |
| 8 | 8.4 | 16 | 1.6 |
| 10 | 10.5 | 20 | 2 |
| 12 | 13 | 24 | 2.5 |
| 14 | 15 | 28 | 2.5 |
| 16 | 17 | 30 | 3 |
| 18 | 19 | 34 | 3 |
| 20 | 21 | 37 | 3 |
| 22 | 23 | 39 | 3 |
| 24 | 25 | 44 | 4 |
| 27 | 28 | 50 | 4 |
| 30 | 31 | 56 | 4 |
| 33 | 34 | 60 | 5 |
| 36 | 37 | 66 | 5 |
| 39 | 40 | 72 | 6 |
| 42 | 43 | 78 | 7 |
| 45 | 46 | 85 | 7 |
| 48 | 50 | 92 | 8 |
| 52 | 54 | 98 | 8 |
| 56 | 58 | 105 | 9 |
| 60 | 62 | 110 | 9 |
The commercial version described here has 100 HV hardness. Bore and outside diameter follow catalogue dimensions; complete tolerances require confirmation against the supply specification. Similar geometry does not give the washer a 200 HV or 300 HV hardness class.
Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.
Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.
| Execution reference | Material | Class / hardness | Documented finishes |
|---|---|---|---|
| ISO 7089 | Steel | 300 HV | GEOMET 321A; Hot-dip galvanized; Plain; Zinc plated |
| ISO 7089 | Steel | 200 HV | Black zinc plated; Black zinc-nickel with sealer; GEOMET 321A; Hot-dip galvanized; Iridescent ≥8 µm; Plain; Yellow zinc plated; Zinc plated |
| DIN 125 | Nylon (PA) | Not applicable | To be specified |
| ISO 7089 | Stainless A4 | To be specified | To be specified |
| DIN 125 | Steel | 100 HV | GEOMET 321A; Geomet 500a; Grey nickel plated with sealer |
| DIN 125 | Stainless A2 | To be specified | To be specified |
| DIN 125 | Stainless A4 | To be specified | To be specified |
| DIN 125 A | Steel | 100 HV | Yellow zinc plated; Zinc plated |
| DIN 125 | Brass | Not applicable | To be specified |
| DIN125 | Brass | Not applicable | To be specified |
| DIN 34815 ex DIN 125 | Polyamide | Not applicable | Natural colour |
| DIN 125 A | Stainless A5 · 1.4571 | To be specified | To be specified |
| DIN 125 A | Duplex · 1.4462 | To be specified | To be specified |
| DIN 125 A | Stainless HCR · 1.4529 | To be specified | To be specified |
| DIN 125 A | Brass OT63 | Not applicable | To be specified |
| DIN 125 A | Nylon PA66 | Not applicable | To be specified |
“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.
| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
DIN 125 A is a historical reference used commercially for plain washers without chamfer. This is the 100 HV steel version; it is not presented as ISO 7089.
Related reference with distinct hardness requirements: ISO 7089 specifies 200 HV/300 HV. Do not confuse the commercial 100 HV version with ISO conformity.
Related commercial reference for plain washers. Verify the requested specification and dimensions without claiming exact normative equivalence.
Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.
Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.
Send your specification →