Stainless sliding nut with POM spring
AISI 316 nut with a POM elastic element for support systems.
- Nut
- AISI 316
- Spring / retaining element
- POM

Technical drawing

Dimensions in mm. Identification drawing, not a manufacturing drawing. Unspecified dimensions must be confirmed for the requested variant.
Variants and dimensional data
| Thread | Channel | a | b | D | s |
|---|---|---|---|---|---|
| M6 | Channel to be checked against drawing | 23 | 13.5 | 25 | 4 |
| M8 | Channel to be checked against drawing | 23 | 13.5 | 25 | 5 |
| M10 | Channel to be checked against drawing | 23 | 14 | 25 | 5 |
Materials, classes and finishes
| Nut | Spring | Finishes |
|---|---|---|
| AISI 316 | POM | Plain stainless |
Documented size and finish combinations
Variants
| Thread | Nominal pitch | Channel | Finish |
|---|---|---|---|
| M6 | 1 | Channel to be checked against drawing | Plain stainless |
| M8 | 1.25 | Channel to be checked against drawing | Plain stainless |
| M10 | 1.5 | Channel to be checked against drawing | Plain stainless |
| Thread | Channel / finish | a | b | D | s |
|---|---|---|---|---|---|
| M6 | Channel to be checked against drawing / Plain stainless | 23 | 13.5 | 25 | 4 |
| M8 | Channel to be checked against drawing / Plain stainless | 23 | 13.5 | 25 | 5 |
| M10 | Channel to be checked against drawing / Plain stainless | 23 | 14 | 25 | 5 |
Documentation and application
Download technical data sheet (PDF)Application and joint verification
For building-services supports and channel assemblies. Check channel opening, lips, thickness and geometry; nominal section alone does not establish compatibility. Listed pitch is metric coarse: specify any different requirement.
Joint loads must be established for the actual supplied combination. No certified load is attributed to these family representations. Original illustrative images.



