Spring channel nuts
Sliding spring nuts for channels and support systems, in different threads, configurations and materials.
Choose a configuration
Find the nut for your channel
The five types
Steel channel nut with coil spring
For 41×21 and 41×41 channels: coil spring and two supply finishes.
View data sheet →
Stainless channel nut with coil spring
AISI 316 nut for 41×41 channel, with positioning spring.
View data sheet →
Channel nut with spring and washer
Assembly with a 41×41 mm top washer and preassembled metal spring.
View data sheet →
Steel sliding nut with POM spring
Zinc-plated nut with a POM elastic element for positioning in the channel.
View data sheet →
Stainless sliding nut with POM spring
AISI 316 nut with a POM elastic element for support systems.
View data sheet →Materials and finishes
Steel 1.0332, zinc plated or hot-dip galvanized where specified; AISI 316 nuts in stainless versions. The spring may be metal or POM: each sheet distinguishes both components.
Application and joint verification
For building-services supports and channel assemblies. Check channel opening, lips, thickness and geometry; nominal section alone does not establish compatibility. Listed pitch is metric coarse: specify any different requirement.
Joint loads must be established for the actual supplied combination. No certified load is attributed to these family representations. Original illustrative images.