DUEEMME SIDOL · NUTS
Stainless channel nut with coil spring
AISI 316 nut for 41×41 channel, with positioning spring.
Choose a configuration
Materials and configuration
| Nut | Spring | Finishes |
|---|---|---|
| AISI 316 | To be specified in quotation | Plain stainless |
Variants
| Thread | Nominal pitch | Channel | Finish |
|---|---|---|---|
| M6 | 1 | 41×41 | Plain stainless |
| M8 | 1.25 | 41×41 | Plain stainless |
| M10 | 1.5 | 41×41 | Plain stainless |
| M12 | 1.75 | 41×41 | Plain stainless |
Drawing and dimensions
Dimensions in mm. Identification drawing, not a manufacturing drawing. Unspecified dimensions must be confirmed for the requested variant.
| Thread | Channel / finish | b | s | L |
|---|---|---|---|---|
| M6 | 41×41 / Plain stainless | 20 | 5 | 38 |
| M8 | 41×41 / Plain stainless | 20 | 6 | 38 |
| M10 | 41×41 / Plain stainless | 20 | 8 | 38 |
| M12 | 41×41 / Plain stainless | 20 | 9 | 38 |
Application and joint verification
For building-services supports and channel assemblies. Check channel opening, lips, thickness and geometry; nominal section alone does not establish compatibility. Listed pitch is metric coarse: specify any different requirement.
Joint loads must be established for the actual supplied combination. No certified load is attributed to these family representations. Original illustrative images.