DIN 1587:2021-11
DIN 1587:2021-11 is the current high-type standard. The table provides verified commercial dimensions for selection; specify internal construction, tolerances and product conformity in the order.
The closed dome covers the screw end and reduces exposed thread. This high form has a hexagonal base: select thread size, spanner size and envelope around the actual screw projection.


Commercial reference dimensions M4–M24. Across flats M10:16, M12:18 and M14:21 mm; older supplies may differ. Other sizes and materials on request.
Dimensions in mm. Identification drawing, not a manufacturing drawing.
| M | Pitch P | s | h max. | m max. |
|---|---|---|---|---|
| 4 | 0.7 | 7 | 8 | 3.2 |
| 5 | 0.8 | 8 | 10 | 4 |
| 6 | 1 | 10 | 12 | 5 |
| 8 | 1.25 | 13 | 15 | 6.5 |
| 10 | 1.5 | 16 | 18 | 8 |
| 12 | 1.75 | 18 | 22 | 10 |
| 14 | 2 | 21 | 25 | 11 |
| 16 | 2 | 24 | 28 | 13 |
| 20 | 2.5 | 30 | 34 | 16 |
| 24 | 3 | 36 | 42 | 19 |
External height h is not the usable blind-hole depth. Check screw projection, thread engagement and clearance before the closed end: a screw bottoming against the dome can prevent correct clamping.
Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.
Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.
| Execution reference | Material | Class / hardness | Documented finishes |
|---|---|---|---|
| DIN 1587 | Stainless A2 | To be specified | To be specified |
| DIN 1587 | Brass | Not applicable | Plain; To be specified |
| DIN 1587 | Steel | To be specified | Black oxide; Black zinc plated; Bronze plated; Nickel plated; Plain; Yellow zinc plated; Zinc plated |
| DIN 7971 | Brass | Not applicable | Plain; Zinc plated |
| DIN 1587 | Stainless A4 | To be specified | To be specified |
| DIN 1587 | Stainless A4 | 80 | To be specified |
| DIN 1587 | Steel | 6 | Zinc plated ≥12 µm |
| DIN 1587 | Polyamide | Not applicable | Natural colour |
| DIN 1587 | Stainless A5 · 1.4571 | To be specified | To be specified |
| DIN 1587 | Duplex · 1.4462 | To be specified | To be specified |
| DIN 1587 | Stainless HCR · 1.4529 | To be specified | To be specified |
| DIN 1587 | Nylon PA66 | Not applicable | To be specified |
“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.
| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
DIN 1587:2021-11 is the current high-type standard. The table provides verified commercial dimensions for selection; specify internal construction, tolerances and product conformity in the order.
Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.
Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.
Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.
Send your specification →