DUEEMME SIDOL TECHNICAL REFERENCE
Swivel lifting ring
Catalogue design · Steel
Male-thread connection. Check the dimensions and documented operating conditions for the required variant.
Request a quote ↗Key technical data
| Parameter | Value |
|---|---|
| Type | Male thread |
| Standard / reference | Catalogue design |
| Material | Steel |
| Thread | Metric |
| Grade | 100 |
| Temperature | N/D |
| Swivelling / pivoting | Yes / yes |
| W.L.L. | See the load conditions for each variant |
Technical drawing and dimensions
Dimension symbols match the table below. D identifies the Thread size column (nominal thread). L is shown in the Thread length L column.
Illustrative technical drawing by Dueemme Sidol. Dimension symbols and reference geometry help you read the dimensional table. Always check the required variant and its applicable documentation. Drawing not to scale unless stated otherwise.
| Symbol | Definition | Unit / format |
|---|---|---|
| A | Internal ring width | mm |
| B | Ring section diameter | mm |
| C | Internal height from the top of the eye to the pivot axis | mm |
| E | Pivot axis height above seating face | mm |
| H | Overall height above seating face, ring upright | mm |
| SW | Body width across flats | mm |
| D1 | Base diameter | mm |
| D | Nominal thread size | M… |
| L | Threaded shank length | mm |
Variants and dimensions
Dimension symbols refer to the technical drawing above. Dimensions in mm; weight in kg. N/D means the value is not documented. Catalogue inclusion does not imply stock availability.
| Thread size (D) | Pitch | Thread length L | Axial W.L.L. kg | Weight kg | Max. tightening torque Nm | A | B | C | E | H | SW | D1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M8 | N/D | 16.0 | N/D | 0.48 | N/D | 30.0 | 13.0 | 46.0 | 50.0 | 105.0 | 30.0 | 38.0 |
| M8 | N/D | 18.0 | N/D | 0.48 | N/D | 30.0 | 13.0 | 46.0 | 50.0 | 105.0 | 30.0 | 38.0 |
| M10 | N/D | 18.0 | N/D | 0.48 | N/D | 30.0 | 13.0 | 46.0 | 50.0 | 105.0 | 30.0 | 38.0 |
| M12 | N/D | 18.0 | N/D | 0.5 | N/D | 30.0 | 13.0 | 46.0 | 50.0 | 105.0 | 30.0 | 38.0 |
| M14 | N/D | 20.0 | N/D | 0.53 | N/D | 30.0 | 13.0 | 46.0 | 50.0 | 105.0 | 30.0 | 38.0 |
| M16 | N/D | 20.0 | N/D | 0.53 | N/D | 30.0 | 13.0 | 46.0 | 50.0 | 105.0 | 30.0 | 38.0 |
| M20 | N/D | 30.0 | N/D | 0.53 | N/D | 30.0 | 13.0 | 46.0 | 50.0 | 105.0 | 30.0 | 38.0 |
| M20 | N/D | 30.0 | N/D | 1.05 | N/D | 34.0 | 16.0 | 57.0 | 61.0 | 131.0 | 40.0 | 50.0 |
Load conditions
| Thread size | Configuration | Angle | W.L.L. kg |
|---|---|---|---|
| M8 | Indicative catalogue load rating — conditions of use to be verified | N/D | 300.0 |
| M8 | Indicative catalogue load rating — conditions of use to be verified | N/D | 300.0 |
| M10 | Indicative catalogue load rating — conditions of use to be verified | N/D | 500.0 |
| M12 | Indicative catalogue load rating — conditions of use to be verified | N/D | 700.0 |
| M14 | Indicative catalogue load rating — conditions of use to be verified | N/D | 1000.0 |
| M16 | Indicative catalogue load rating — conditions of use to be verified | N/D | 1400.0 |
| M20 | Indicative catalogue load rating — conditions of use to be verified | N/D | 1700.0 |
| M20 | Indicative catalogue load rating — conditions of use to be verified | N/D | 2500.0 |
Materials and finishes
| Material | Finish |
|---|---|
| Steel | To be confirmed for the selected variant |
Documentation
| Document | Availability |
|---|---|
| Operating instructions | Request for the selected variant |
| Technical data sheet / certification | Variant-specific documentation on request |
| CAD / 3D | Availability to be confirmed |