DUEEMME SIDOL TECHNICAL REFERENCE
Swivel lifting point
Catalogue design · Steel
Male-thread connection. Check the dimensions and documented operating conditions for the required variant.
Request a quote ↗Key technical data
| Parameter | Value |
|---|---|
| Type | Male thread |
| Standard / reference | Catalogue design |
| Material | Steel |
| Thread | Metric |
| Grade | 100 |
| Temperature | N/D |
| Swivelling / pivoting | Yes / yes |
| W.L.L. | See the load conditions for each variant |
Technical drawing and dimensions
Dimension symbols match the table below. M identifies the Thread size column (nominal thread). CH and ch identify different wrench interfaces.
Illustrative technical drawing by Dueemme Sidol. Dimension symbols and reference geometry help you read the dimensional table. Always check the required variant and its applicable documentation. Drawing not to scale unless stated otherwise.
| Symbol | Definition | Unit / format |
|---|---|---|
| A | External head width | mm |
| B | Internal eye width | mm |
| C | Top section thickness in front view | mm |
| E | Body width in side view | mm |
| F | Body width in front view | mm |
| G | Head thickness in side view | mm |
| H | Height above seating face | mm |
| J | Internal eye height | mm |
| K | Height from seating face to top of bolt | mm |
| L | Threaded shank length | mm |
| CH | Bolt head width across flats | mm |
| ch | Bolt hex socket size | mm |
| M | Nominal thread size | M… |
Variants and dimensions
Dimension symbols refer to the technical drawing above. Dimensions in mm; weight in kg. N/D means the value is not documented. Catalogue inclusion does not imply stock availability.
| Thread size (M) | Pitch | Thread length L | Axial W.L.L. kg | Weight kg | Max. tightening torque Nm | A | B | C | E | F | G | H | J | K | L | CH | ch |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M8 | N/D | 12.0 | 500 | 0.37 | 10 | 56.0 | 28.0 | 14.0 | 30.0 | 55.0 | 11.0 | 99.0 | 40.0 | 33.5 | 12.0 | 13.0 | 5.0 |
| M10 | N/D | 15.0 | 1000 | 0.37 | 15 | 56.0 | 28.0 | 14.0 | 30.0 | 55.0 | 11.0 | 99.0 | 40.0 | 34.5 | 15.0 | 17.0 | 6.0 |
| M12 | N/D | 18.0 | 1300 | 0.37 | 25 | 56.0 | 28.0 | 14.0 | 30.0 | 55.0 | 11.0 | 99.0 | 40.0 | 35.5 | 18.0 | 19.0 | 7.0 |
| M14 | N/D | 21.0 | N/D | 1.3 | N/D | 74.5 | 38.0 | 18.0 | 47.0 | 78.0 | 17.0 | 135.5 | 55.0 | 46.0 | 21.0 | 22.0 | 7.0 |
| M16 | N/D | 25.0 | N/D | 1.3 | N/D | 74.5 | 38.0 | 18.0 | 47.0 | 78.0 | 17.0 | 135.5 | 55.0 | 46.5 | 25.0 | 24.0 | 10.0 |
| M18 | N/D | 27.0 | N/D | 1.3 | N/D | 74.5 | 38.0 | 18.0 | 47.0 | 78.0 | 17.0 | 135.5 | 55.0 | 47.0 | 27.0 | 27.0 | 10.0 |
| M20 | N/D | 30.0 | N/D | 1.3 | N/D | 74.5 | 38.0 | 18.0 | 47.0 | 78.0 | 17.0 | 135.5 | 55.0 | 48.0 | 30.0 | 30.0 | 12.0 |
Load conditions
| Thread size | Configuration | Angle | W.L.L. kg |
|---|---|---|---|
| M8 | Single point, axial loading | 0° | 500 |
| M8 | Single point, lateral loading at 90° | 90° | 300 |
| M10 | Single point, axial loading | 0° | 1000 |
| M10 | Single point, lateral loading at 90° | 90° | 600 |
| M12 | Single point, axial loading | 0° | 1300 |
| M12 | Single point, lateral loading at 90° | 90° | 1000 |
| M14 | Indicative catalogue load rating — conditions of use to be verified | N/D | 1300.0 |
| M16 | Indicative catalogue load rating — conditions of use to be verified | N/D | 1600.0 |
| M18 | Indicative catalogue load rating — conditions of use to be verified | N/D | 2000.0 |
| M20 | Indicative catalogue load rating — conditions of use to be verified | N/D | 2500.0 |
Materials and finishes
| Material | Finish |
|---|---|
| Steel | To be confirmed for the selected variant |
Documentation
| Document | Availability |
|---|---|
| Operating instructions | Request for the selected variant |
| Technical data sheet / certification | Variant-specific documentation on request |
| CAD / 3D | Availability to be confirmed |