DUEEMME SIDOL TECHNICAL REFERENCE
Swivel hoist ring
Catalogue design · 20CrNiMo steel + Al; 35CrMo bolt
Male-thread connection. Check the dimensions and documented operating conditions for the required variant.
Request a quote ↗Key technical data
| Parameter | Value |
|---|---|
| Type | Male thread |
| Standard / reference | Catalogue design |
| Material | 20CrNiMo steel + Al; 35CrMo bolt |
| Thread | Metric |
| Grade | N/D |
| Temperature | N/D |
| Swivelling / pivoting | Yes / yes |
| W.L.L. | See the load conditions for each variant |
Technical drawing and dimensions
Dimension symbols match the table below. D identifies the Thread size column (nominal thread). Column D gives the nominal diameter in mm.
Illustrative technical drawing by Dueemme Sidol. Dimension symbols and reference geometry help you read the dimensional table. Always check the required variant and its applicable documentation. Drawing not to scale unless stated otherwise.
| Symbol | Definition | Unit / format |
|---|---|---|
| A | Internal ring width | mm |
| B | Ring section diameter | mm |
| C | Clear height above the bolt head | mm |
| D | Nominal thread size | M… / mm |
| E | Body height from seating face to top of bolt head | mm |
| F | Base diameter | mm |
| G | Body envelope in side view | mm |
| H | Overall width across the side pivots | mm |
| L | Threaded shank length | mm |
| N | Projection of the lowered ring beyond the body | mm |
| Ch | Bolt hex socket size | mm |
Variants and dimensions
Dimension symbols refer to the technical drawing above. Dimensions in mm; weight in kg. N/D means the value is not documented. Catalogue inclusion does not imply stock availability.
| Thread size (D) | Pitch | Thread length L | Axial W.L.L. kg | Weight kg | Max. tightening torque Nm | A | B | C | D | E | F | G | H | L | N | Ch |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M8 | N/D | 18.0 | N/D | 0.46 | N/D | 36.0 | 12.0 | 50.0 | 8.0 | 35.0 | 34.0 | 38.0 | 68.0 | 18.0 | 53.0 | 6.0 |
| M10 | N/D | 18.0 | N/D | 0.47 | N/D | 36.0 | 12.0 | 48.0 | 10.0 | 37.0 | 34.0 | 38.0 | 68.0 | 18.0 | 53.0 | 8.0 |
| M12 | N/D | 23.0 | N/D | 0.48 | N/D | 36.0 | 12.0 | 46.0 | 12.0 | 39.0 | 34.0 | 38.0 | 68.0 | 23.0 | 53.0 | 10.0 |
| M14 | N/D | 23.0 | N/D | 0.5 | N/D | 36.0 | 12.0 | 44.0 | 14.0 | 41.0 | 34.0 | 38.0 | 68.0 | 23.0 | 53.0 | 12.0 |
| M16 | N/D | 28.0 | N/D | 0.53 | N/D | 36.0 | 12.0 | 42.0 | 16.0 | 43.0 | 34.0 | 38.0 | 68.0 | 28.0 | 53.0 | 14.0 |
Load conditions
| Thread size | Configuration | Angle | W.L.L. kg |
|---|---|---|---|
| M8 | Indicative catalogue load rating — conditions of use to be verified | N/D | 400.0 |
| M10 | Indicative catalogue load rating — conditions of use to be verified | N/D | 700.0 |
| M12 | Indicative catalogue load rating — conditions of use to be verified | N/D | 1000.0 |
| M14 | Indicative catalogue load rating — conditions of use to be verified | N/D | 1300.0 |
| M16 | Indicative catalogue load rating — conditions of use to be verified | N/D | 1600.0 |
Materials and finishes
| Material | Finish |
|---|---|
| 20CrNiMo steel + Al; 35CrMo bolt | To be confirmed for the selected variant |
Documentation
| Document | Availability |
|---|---|
| Operating instructions | Request for the selected variant |
| Technical data sheet / certification | Variant-specific documentation on request |
| CAD / 3D | Availability to be confirmed |