ISO 7093-1 · 2000

Large-series plain washer

A broad bearing surface spreads clamping force over soft materials or large clearance holes. Check thickness and actual support: a larger outside diameter alone does not establish the joint capacity.

DIN 9021

Dimensional range
M3–M36
Series
Large · without chamfer
Configuration
200 HV / 300 HV
References
DIN 9021
Large-series plain washer

Technical drawing

Technical drawing ISO 7093-1
d1
bore diameter
d2
outside diameter
s
thickness (also designated h in technical references)

Variants and dimensional data

Large series, product grade A, nominal sizes 3–36 mm. The nominal size identifies the mating screw; bore, outside diameter and thickness are separate dimensions. Enquire about other sizes and geometries.

Dimensions in mm. Identification drawing, not a manufacturing drawing.

Md1 min.d2 max.s
33.290.8
3.53.7110.8
44.3121
55.3151
66.4181.6
88.4242
1010.5302.5
1213373
1415443
1617503
1819564
2021604
2223665
2425725
2730856
3033926
33361056
36391108
Limits and tolerances
Md1 max.d2 min.s min.s max.
33.388.640.70.9
3.53.8810.570.70.9
44.4811.570.91.1
55.4814.570.91.1
66.6217.571.41.8
88.6223.481.82.2
1010.7729.482.32.7
1213.2736.382.73.3
1415.2743.382.73.3
1617.2749.382.73.3
1819.3355.263.74.3
2021.3359.263.74.3
2223.5264.84.45.6
2425.5270.84.45.6
2730.5283.65.46.6
3033.6290.65.46.6
3336.62103.65.46.6
3639.62108.679

Hardness is expressed in HV, not as a bolt property class. Steel: 200 HV or 300 HV; A2/A4 stainless: 200 HV. For large holes or yielding supports, also assess bending and bearing pressure.

Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.

Materials, classes, finishes and treatments

Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.

Execution referenceMaterialClass / hardnessDocumented finishes
DIN 9021Stainless A2To be specifiedTo be specified
DIN 9021Nylon (PA)Not applicableTo be specified
DIN 9021BrassNot applicableTo be specified
DIN 9021Steel100 HVBlack oxide; Black zinc plated; Bronze plated; GEOMET 321A; Geomet 321b; Hot-dip galvanized; Nickel plated; Plain; Trivalent iridescent zinc plated; Yellow zinc plated; Yellow zinc plated Cr III 12 µm with sealer; Yellow zinc plated ≥12 µm; Zinc plated; Zinc plated with sealer; Zinc plated ≥12 µm; Zinc plated ≥8 µm
DIN 9021Stainless A4To be specifiedTo be specified
UNI 6593Steel100 HVBlack oxide; Black zinc plated; GEOMET 321A; Hot-dip galvanized; Nickel plated; Plain; Yellow zinc plated; Yellow zinc plated Cr III 12 µm with sealer; Zinc plated; Zinc plated ≥8 µm
DIN 440Steel100 HVZinc plated
DIN 9021Steel200 HVZinc plated
DIN 433Stainless A4To be specifiedTo be specified
DIN 433Steel200 HVZinc plated
DIN 6340Steel100 HVZinc plated
DIN 34816 ex DIN 9021PolyamideNot applicableNatural colour
DIN 9021Stainless A5 · 1.4571To be specifiedTo be specified
DIN 9021Duplex · 1.4462To be specifiedTo be specified
DIN 9021Stainless HCR · 1.4529To be specifiedTo be specified
DIN 9021Nylon PA66Not applicableTo be specified

“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.

Documentation

Download Dueemme data sheet ↓
DocumentStatus
Declaration of conformitySubject to order agreement
Material certificateSubject to order agreement
EN 10204 2.2 test reportSubject to order agreement
EN 10204 3.1 inspection certificateSubject to order agreement
Dimensional inspection reportSubject to order agreement
Coating reportSubject to order agreement
Other documentationSubject to order agreement

Batch documents are not automatically included: specify your requirements in the RFQ.

ISO, DIN and UNI: key differences

ISO 7093-1:2000

ISO 7093-1 identifies the large series in product grade A. Part 2 covers grade C; do not merge the two without checking tolerances.

DIN 9021

Related commercial reference. Neither 100 HV versions nor non-series sizes become ISO 7093-1 merely through resemblance: check dimensions, hardness and specification.

RFQ · ISO 7093-1

Configure your enquiry

Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.

Requested documents

The size you need, including custom specifications

Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.

Send your specification →

Variants

Dueemme Sidol
Panoramica privacy

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.