DIN 436
DIN 436 covers square washers, especially for timber construction. The current edition is 2024-10; this table describes a commercial selection and does not replace the complete standard. DIN 436 is not ASTM F436.
A flat square washer providing a broad bearing surface, particularly for timber joints. Its round hole and parallel faces distinguish it from tapered washers for steel sections: select bore, side length and thickness for the assembly.
UNI 6596


Commercial selection M10, M12, M16, M20, M24 and M27 in 100 HV steel. Intermediate sizes and other geometries can be assessed on request. Nominal dimensions: also specify tolerances, material and finish for supply.
Dimensions in mm. Identification drawing, not a manufacturing drawing.
| M | d1 | Side a | s | kg / 1,000 pcs |
|---|---|---|---|---|
| 10 | 11 | 30 | 3 | 20 |
| 12 | 13.5 | 40 | 4 | 45.7 |
| 16 | 17.5 | 50 | 5 | 88.7 |
| 20 | 22 | 60 | 5 | 126 |
| 24 | 26 | 80 | 6 | 275 |
| 27 | 30 | 90 | 6 | 348 |
Indicative supplier-catalogue weight for each size in plain steel. It is not a normative or certified batch weight; do not transfer it to stainless versions or different dimensions.
The steel version described has hardness class 100 HV. Check bearing pressure on the substrate, washer bending and edge distances; a larger bearing surface alone does not determine joint capacity.
Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.
Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.
| Execution reference | Material | Class / hardness | Documented finishes |
|---|---|---|---|
| DIN 436 | Stainless A2 | To be specified | To be specified |
| DIN 436 | Stainless A4 | To be specified | To be specified |
“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.
| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
DIN 436 covers square washers, especially for timber construction. The current edition is 2024-10; this table describes a commercial selection and does not replace the complete standard. DIN 436 is not ASTM F436.
Related commercial reference. Compare bore, side length, thickness and supply conditions; listing the references together does not imply exact equivalence.
Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.
Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.
Send your specification →