UNI 5713

Large-width hexagon nut for steelwork

A large-width hexagon nut for steelwork, selected with the assembly specification and required documents.

DIN 6915

Dimensional range
M12–M30
Thread
Metric · coarse pitch
Configuration
Large-width hexagon nut for steelwork
References
DIN 6915
Large-width hexagon nut for steelwork

Technical drawing

Technical drawing UNI 5713
d
nominal thread
P
pitch
s
width across flats
m
body height
h
overall height
dc
flange diameter. Only columns included in the table apply.

Variants and dimensional data

Reference sizes are listed in the table. Other diameters, pitches, materials and finishes are available on request, subject to an agreed supply specification.

Dimensions in mm. Identification drawing, not a manufacturing drawing.

MPitch Psm
121.752210
1422411
1622713
182.53015
202.53216
222.53618
2434119
2734622
303.55024

A single nut does not constitute a certified EN 14399 assembly. Do not mix structural assembly components without the verification required by the specification. Use the Structural Bolting section for complete assemblies.

Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.

Materials, classes, finishes and treatments

Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.

Execution referenceMaterialClass / hardnessDocumented finishes
DIN 6915Steel10GEOMET 321A; Hot-dip galvanized; Plain; Yellow zinc plated; Zinc plated

“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.

Documentation

Download Dueemme data sheet ↓
DocumentStatus
Declaration of conformitySubject to order agreement
Material certificateSubject to order agreement
EN 10204 2.2 test reportSubject to order agreement
EN 10204 3.1 inspection certificateSubject to order agreement
Dimensional inspection reportSubject to order agreement
Coating reportSubject to order agreement
Other documentationSubject to order agreement

Batch documents are not automatically included: specify your requirements in the RFQ.

ISO, DIN and UNI: key differences

UNI 5713

Dimensions of the specified commercial selection do not replace a manufacturing drawing or the complete supply specification.

DIN 6915

Related reference; compare dimensions, design and mechanical specification before substitution. Exact equivalence is not claimed.

RFQ · UNI 5713

Configure your enquiry

Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.

Requested documents

Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.

The size you need, including custom specifications

Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.

Send your specification →
Dueemme Sidol
Panoramica privacy

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.