DIN 315
Dimensions of the specified commercial selection do not replace a manufacturing drawing or the complete supply specification.
Hand tightening for accessible adjustment and fastening points; cast design with rounded wings.


Reference sizes are listed in the table. Other diameters, pitches, materials and finishes are available on request, subject to an agreed supply specification.
Dimensions in mm. Identification drawing, not a manufacturing drawing.
| M | Pitch P | e | h | d2 | m |
|---|---|---|---|---|---|
| 4 | 0.7 | 19 | 9.5 | 7 | 3.9 |
| 5 | 0.8 | 25 | 12 | 9.5 | 5.3 |
| 6 | 1 | 31.5 | 16 | 11.5 | 6.5 |
| 8 | 1.25 | 37.5 | 19 | 14.5 | 8.3 |
| 10 | 1.5 | 49.5 | 24 | 18.5 | 10 |
| 12 | 1.75 | 63.5 | 32.3 | 21.5 | 12 |
| 16 | 2 | 71.5 | 36.3 | 27.5 | 15 |
Do not confuse the cast DIN 315 design with stamped American-type wings or the commercial UNI 5448 series: shape and envelope can differ. Do not apply tool-tightened hexagon-nut torque values.
Table dimensions refer to the stated execution. DIN/UNI, polymer and special variants require verification of their own dimensions; they do not automatically inherit reference geometry, weight or performance.
Executions are distinguished by reference, material, class and finish. DIN, ISO and UNI references do not imply dimensional equivalence or availability of every size in each material. Supply and batch documents require quotation confirmation.
| Execution reference | Material | Class / hardness | Documented finishes |
|---|---|---|---|
| sim. DIN 315 / UNI 5448 | Steel | To be specified | Black oxide; Brass plated; GEOMET 321A; Nickel plated; Plain; Yellow zinc plated Cr III 12 µm with sealer; Zinc plated; Zinc plated ≥12 µm |
| sim. DIN 315 / UNI 5448 | Stainless A2 | To be specified | To be specified |
| sim. DIN 315 / UNI 5448 | Stainless A4 | To be specified | To be specified |
| sim. DIN 315 / UNI 5448 | Brass | Not applicable | To be specified |
| DIN 315 | Polyamide | Not applicable | Natural colour |
“To be specified” is a requirement not established by this selection; it does not imply class 70/80, HV hardness or an automatic finish. Steel property classes do not apply to nylon/polyamide; PA6 and PA66 are distinguished only where stated. For nuts with non-metallic inserts, the material shown is the body material.
| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
Dimensions of the specified commercial selection do not replace a manufacturing drawing or the complete supply specification.
Selections follow the technical combinations in this data sheet. Quantities, delivery terms and documents will be agreed in the quotation.
Other materials, property classes and finishes available on request. Each configuration is assessed against the enquiry specification.
Other diameters, lengths, materials and finishes can be assessed on request. For dedicated production, we agree geometry, requirements and minimum quantities with the customer.
Send your specification →