DUEEMME SIDOL TECHNICAL REFERENCE
Stainless steel collared eye bolt
Catalogue design · AISI 316 stainless steel
For technical and marine applications. Not intended for lifting loads.
Request a quote ↗Key technical data
| Parameter | Value |
|---|---|
| Type | Male thread |
| Standard / reference | Catalogue design |
| Material | AISI 316 stainless steel |
| Thread | Metric |
| Grade | N/D |
| Temperature | N/D |
| Swivelling / pivoting | No / no |
| W.L.L. | Not rated for lifting |
Technical drawing and dimensions
Dimension symbols match the table below. D identifies the Thread size column (nominal thread).
Illustrative technical drawing by Dueemme Sidol. Dimension symbols and reference geometry help you read the dimensional table. Always check the required variant and its applicable documentation. Drawing not to scale unless stated otherwise.
| Symbol | Definition | Unit / format |
|---|---|---|
| D | Nominal thread size | M… |
| L1 | Overall length | mm |
| L2 | Distance from eye centre to shank end | mm |
| L3 | Shank length below the collar | mm |
| B1 | Collar diameter | mm |
| B2 | Eye thickness | mm |
| D1 | Eye bore diameter | mm |
Variants and dimensions
Dimension symbols refer to the technical drawing above. Dimensions in mm; weight in kg. N/D means the value is not documented. Catalogue inclusion does not imply stock availability.
| Thread size (D) | Pitch | Thread length L | Axial W.L.L. kg | Weight kg | Max. tightening torque Nm | L1 | L2 | L3 | B1 | B2 | D1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| M6 | N/D | 60 | N/D | N/D | N/D | 83 | 76 | 60 | 25 | 4 | 6.5 |
| M8 | N/D | 80 | N/D | N/D | N/D | 110 | 104 | 80 | 25 | 5 | 8.5 |
| M10 | N/D | 100 | N/D | N/D | N/D | 137 | 125 | 100 | 30 | 6 | 10.5 |
Load conditions
For technical and marine applications. Not intended for lifting loads.
Materials and finishes
| Material | Finish |
|---|---|
| AISI 316 stainless steel | To be confirmed for the selected variant |
Documentation
| Document | Availability |
|---|---|
| Operating instructions | Request for the selected variant |
| Technical data sheet / certification | Variant-specific documentation on request |
| CAD / 3D | Availability to be confirmed |