DUEEMME SIDOL TECHNICAL REFERENCE
Stainless steel eye bolt, similar to DIN 580
Similar to DIN 580 · AISI 316 / AISI 304 stainless steel
For technical and marine applications. Not intended for lifting loads.
Request a quote ↗Key technical data
| Parameter | Value |
|---|---|
| Type | Male thread |
| Standard / reference | Similar to DIN 580 |
| Material | AISI 316 / AISI 304 stainless steel |
| Thread | Metric |
| Grade | N/D |
| Temperature | N/D |
| Swivelling / pivoting | No / no |
| W.L.L. | Not rated for lifting |
Technical drawing and dimensions
Dimension symbols match the table below. D1 identifies the Thread size column (nominal thread).
Illustrative technical drawing by Dueemme Sidol. Dimension symbols and reference geometry help you read the dimensional table. Always check the required variant and its applicable documentation. Drawing not to scale unless stated otherwise.
| Symbol | Definition | Unit / format |
|---|---|---|
| D1 | Nominal thread size | M… |
| D2 | Base diameter | mm |
| D3 | Internal eye diameter | mm |
| H | Eye and base height above the shank | mm |
| H1 | Base height | mm |
| K | Ring thickness | mm |
| L | Threaded shank length below the base | mm |
Variants and dimensions
Dimension symbols refer to the technical drawing above. Dimensions in mm; weight in kg. N/D means the value is not documented. Catalogue inclusion does not imply stock availability.
| Thread size (D1) | Pitch | Thread length L | Axial W.L.L. kg | Weight kg | Max. tightening torque Nm | L | D2 | D3 | H | H1 | K |
|---|---|---|---|---|---|---|---|---|---|---|---|
| M5 | N/D | 11.0 | N/D | N/D | N/D | 11.0 | 15.0 | 15.0 | 25.0 | 6.0 | 5.0 |
| M6 | N/D | 11.0 | N/D | N/D | N/D | 11.0 | 16.0 | 16.0 | 28.0 | 6.0 | 6.0 |
| M8 | N/D | 13.0 | N/D | N/D | N/D | 13.0 | 20.0 | 20.0 | 33.0 | 6.0 | 8.0 |
| M10 | N/D | 17.0 | N/D | N/D | N/D | 17.0 | 25.0 | 25.0 | 42.0 | 8.0 | 10.0 |
| M12 | N/D | 20.5 | N/D | N/D | N/D | 20.5 | 30.0 | 30.0 | 51.0 | 10.0 | 12.0 |
| M16 | N/D | 27.0 | N/D | N/D | N/D | 27.0 | 35.0 | 35.0 | 60.0 | 12.0 | 14.0 |
| M20 | N/D | 30.0 | N/D | N/D | N/D | 30.0 | 40.0 | 40.0 | 68.8 | 14.0 | 16.0 |
| M24 | N/D | 36.0 | N/D | N/D | N/D | 36.0 | 50.0 | 50.0 | 86.8 | 18.0 | 20.0 |
| M30 | N/D | 45.0 | N/D | N/D | N/D | 45.0 | 65.0 | 60.0 | 104.8 | 22.0 | 24.0 |
Load conditions
For technical and marine applications. Not intended for lifting loads.
Materials and finishes
| Material | Finish |
|---|---|
| AISI 316 / AISI 304 stainless steel | To be confirmed for the selected variant |
Documentation
| Document | Availability |
|---|---|
| Operating instructions | Request for the selected variant |
| Technical data sheet / certification | Variant-specific documentation on request |
| CAD / 3D | Availability to be confirmed |