Twin-start countersunk TX chipboard screw
Geometry, drive and characteristics of documented executions. Materials and finishes are shown separately; enter the required length freely in your quotation request.
Wood screws
- Dimensional reference
- Wood screws
- Thread
- Wood thread
- Drive
- TX
- Units
- mm
Representative geometry photograph. Material and finish are specified separately.
Technical drawing and legend
Ambrovit reference execution 07052
Drawing not to scale. Symbols refer only to this execution.
- A
- Head diameter
- D
- External thread diameter
- 2P
- Twin-start thread lead (2P)
- TX
- Hexalobular recess number
Dimensions
Dimensions in mm, except drive size. Min./Max. and approximate values follow the source. Tables apply to the indicated executions and must not be extended automatically to other products. Availability is confirmed in the quotation.
Ambrovit reference execution 07052
| Nominal diameter | Limit | A | D | 2P | TX |
|---|---|---|---|---|---|
| 3,0 | Min. | 5,50 | 2,75 | ~2,80 | T10 |
| 3,0 | Max | 5,80 | 3,05 | ~2,80 | T10 |
| 3,5 | Min. | 6,40 | 3,35 | ~3,40 | T15 |
| 3,5 | Max | 6,70 | 3,55 | ~3,40 | T15 |
| 4,0 | Min. | 7,40 | 3,80 | ~3,80 | T20 |
| 4,0 | Max | 7,70 | 4,10 | ~3,80 | T20 |
| 4,5 | Min. | 8,20 | 4,30 | ~4,20 | T25 |
| 4,5 | Max | 8,50 | 4,60 | ~4,20 | T25 |
| 5,0 | Min. | 9,20 | 4,75 | ~4,60 | T25 |
| 5,0 | Max | 9,50 | 5,10 | ~4,60 | T25 |
| 6,0 | Min. | 10,90 | 5,75 | ~5,40 | T30 |
| 6,0 | Max | 11,40 | 6,20 | ~5,40 | T30 |
Materials and finishes
Executions documented by the named suppliers. Material and coating are confirmed in the quotation; a finish does not imply every diameter and geometry combination.
| Material | Finish | Reference |
|---|---|---|
| C1022 steel | Bronze plated; Zinc plated Cr3; Yellow zinc plated Cr3 | Ambrovit 07052 |
Documentation
Download Dueemme data sheet ↓| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
Executions and application
Specify the timber type and density, the panel or component to be fixed, the manufacturer-required pilot hole and edge/end distances. No universal pilot-hole diameter is assigned. Wood drill-point versions do not imply steel drilling capability.
Request a quotation
Specify type, diameter, required length, quantity, material and finish. Dueemme will confirm execution and availability.
Send your request