Washer head TX - 30° thread - blunt end
Direct fastening into plastics. Reference geometry: Kilton 107TX. Check the component material, pilot hole and assembly conditions.
30° thread
- Geometry reference
- Kilton 107TX
- Thread
- 30° thread
- Drive
- TX
- Units
- mm
Technical drawing and legend
Kilton 107TX drawing, not to scale.
- A
- Head diameter
- H
- Head height
- Q
- Recess depth
- R
- Underhead fillet radius
- U
- Flange thickness
- V
- Maximum unthreaded portion under the head
- D
- Major thread diameter
- P
- Thread pitch
- Y
- Minor diameter
- L
- Length to specify in the enquiry; reference as shown in the drawing
Dimensions
Dimensions in mm, except drive size. Min / max pairs are dimensional limits for Kilton 107TX. A dash means the manufacturer does not state a value. Specify the required length in the enquiry.
| Nominal diameter | A min max | H min max | Q min max | Drive n° | R | U | V max | D min max | P | Y min |
|---|---|---|---|---|---|---|---|---|---|---|
| 2,5 | 5,40 / 5,90 | 1,25 / 1,55 | 1,03 / 1,15 | T8 | 0,40 | 0,60 | 1,30 | 2,50 / 2,64 | 1,12 | 1,38 |
| 3 | 5,80 / 6,20 | 1,45 / 1,75 | 1,27 / 1,39 | T10 | 0,40 | 0,60 | 1,50 | 3,00 / 3,18 | 1,34 | 1,63 |
| 3,5 | 7,69 / 8,15 | 2,25 / 2,55 | 1,27 / 1,39 | T10 | 0,40 | 0,80 | 1,80 | 3,50 / 3,68 | 1,57 | 1,89 |
| 4 | 8,46 / 8,94 | 2,35 / 2,65 | 1,65 / 1,77 | T20 | 0,40 | 0,80 | 2,00 | 4,00 / 4,18 | 1,79 | 2,14 |
| 5 | 9,60 / 10,00 | 2,40 / 2,80 | 1,65 / 1,77 | T20 | 0,50 | 1,00 | 2,50 | 5,00 / 5,18 | 2,24 | 2,66 |
| 6 | 12,50 / 12,98 | 3,40 / 3,80 | 1,91 / 2,03 | T25 | 0,60 | 1,20 | 3,00 | 6,00 / 6,18 | 2,69 | 3,16 |
Materials and finishes
| Material | Finish | Source |
|---|---|---|
| C1018-C1022 steel | To be specified in the quotation | Kilton 107TX |
| A2 stainless steel | Confirm for the requested execution | IN107TX |
Dueemme confirms material, finish and availability in the quotation. Steel execution dimensions do not automatically apply to stainless versions.
Documentation
Download Dueemme data sheet ↓| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
Application guidance
Pilot hole and assembly torque depend on the polymer, fillers, wall thickness and boss geometry. Validate fastening on the actual component; do not automatically apply metric screw tightening torques.
HI-LO and 30° screws have different profiles. PT, DELTA PT and ecosyn plast trade names do not establish automatic equivalence with the geometry shown here.
Request a quotation
Specify diameter, required length, quantity, material and finish, together with the component polymer and service conditions.
Send enquiry