Pan head PH - HI-LO - pointed
Direct fastening into plastics. Reference geometry: Kilton 161. Check the component material, pilot hole and assembly conditions.
HI-LO
- Geometry reference
- Kilton 161
- Thread
- HI-LO
- Drive
- PH
- Units
- mm
Technical drawing and legend
Kilton 161 drawing, not to scale.
- A
- Head diameter
- H
- Head height
- Q
- Recess depth
- M
- Recess width
- R
- Underhead fillet radius
- D1
- Major diameter of the low thread
- D
- Major diameter of the high thread
- d
- Minor diameter
- P
- Pitch between high-thread crests
- Z
- Axial extent of the point
- L
- Length to specify in the enquiry; reference as shown in the drawing
Dimensions
Dimensions in mm, except drive size. Min / max pairs are dimensional limits for Kilton 161. A dash means the manufacturer does not state a value. Specify the required length in the enquiry.
| Nominal diameter | A min max | H min max | Q min max | Drive n° | M | R | D1 | D min max | d max | P | Z max |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2,5 | 3,90 / 4,20 | 1,55 / 1,80 | 0,86 / 1,32 | 1 | 2,60 | 0,30 | - | 2,45 / 2,65 | - | - | - |
| 3 | 4,60 / 4,90 | 1,75 / 2,00 | 1,30 / 1,60 | 1 | 2,70 | 0,35 | 2,49 | 2,95 / 3,15 | 1,95 | 2,10 | 2,30 |
| 3,5 | 5,30 / 5,60 | 1,95 / 2,20 | 1,35 / 1,80 | 1 | 3,00 | 0,40 | 2,74 | 3,35 / 3,65 | 2,15 | 2,50 | 2,60 |
| 4 | 6,54 / 6,90 | 2,35 / 2,60 | 1,40 / 2,03 | 2 | 4,20 | 0,50 | 3,14 | 3,80 / 4,10 | 2,45 | 2,70 | 3,00 |
| 4,5 | 7,14 / 7,50 | 2,55 / 2,80 | 1,63 / 2,26 | 2 | 4,40 | 0,50 | 3,44 | 4,35 / 4,65 | 2,65 | 2,80 | 3,20 |
| 5 | 7,84 / 8,20 | 2,75 / 3,05 | 1,80 / 2,46 | 2 | 4,60 | 0,60 | 3,79 | 4,80 / 5,10 | 3,00 | 3,00 | 3,70 |
| 5,5 | 9,14 / 9,50 | 3,25 / 3,55 | 2,26 / 2,87 | 2 | 5,00 | 0,70 | 4,29 | 5,30 / 5,60 | 3,50 | 3,00 | 4,30 |
| 6 | 10,37 / 10,80 | 3,65 / 3,95 | 2,49 / 3,15 | 3 | 6,50 | 0,80 | 4,79 | 5,80 / 6,10 | 3,90 | 3,10 | 4,80 |
Materials and finishes
| Material | Finish | Source |
|---|---|---|
| C1018-C1022 steel | Cr3 zinc plating | Kilton 161 |
| A2 stainless steel | Confirm for the requested execution | IN161 |
Dueemme confirms material, finish and availability in the quotation. Steel execution dimensions do not automatically apply to stainless versions.
Documentation
Download Dueemme data sheet ↓| Document | Status |
|---|---|
| Declaration of conformity | Subject to order agreement |
| Material certificate | Subject to order agreement |
| EN 10204 2.2 test report | Subject to order agreement |
| EN 10204 3.1 inspection certificate | Subject to order agreement |
| Dimensional inspection report | Subject to order agreement |
| Coating report | Subject to order agreement |
| Other documentation | Subject to order agreement |
Batch documents are not automatically included: specify your requirements in the RFQ.
Application guidance
Pilot hole and assembly torque depend on the polymer, fillers, wall thickness and boss geometry. Validate fastening on the actual component; do not automatically apply metric screw tightening torques.
HI-LO and 30° screws have different profiles. PT, DELTA PT and ecosyn plast trade names do not establish automatic equivalence with the geometry shown here.
Request a quotation
Specify diameter, required length, quantity, material and finish, together with the component polymer and service conditions.
Send enquiry