Full-bore ball valve
A full-bore stainless steel ball valve with lever operation. Selection includes the medium, service conditions and end connections.
- Material
- AISI 316
- Thread / standard
- Specified on enquiry
Specify the required thread in your enquiry. Connection compatibility must be confirmed before selection.
Technical drawing
Original illustrative drawing. Not to scale; use the documented variant dimensions for selection.
Variants and dimensional data
| Nominal size (in) | L (mm) | Ø D (mm) | Ø D3 (mm) | E (mm) | H (mm) | W (mm) |
|---|---|---|---|---|---|---|
| 1/4" | 55 | 10.5 | 14.2 | 9.5 | 50 | 95 |
| 3/8" | 55 | 12 | 17.6 | 9.5 | 50 | 95 |
| 1/2" | 62 | 15 | 21.8 | 9.5 | 60 | 95 |
| 3/4" | 72 | 20 | 21.8 | 12.5 | 64 | 115 |
| 1" | 84 | 25 | 27.2 | 12.5 | 71 | 135 |
| 1"1/4 | 97 | 32 | 33.9 | 12.5 | 78 | 150 |
| 1"1/2 | 104 | 38 | 42.7 | 12.5 | 86 | 160 |
| 2" | 120 | 49 | 48.8 | 16 | 95 | 180 |
Materials, classes and finishes
- Material
- AISI 316
- Thread / standard
- Specified on enquiry
Material and size combinations are variant-specific: use the selection table below. Other materials, grades and finishes available on request.
Open documented configurations and select for RFQ
Select material and size
| Material | Nominal size (in) | L (mm) | Ø D (mm) | Ø D3 (mm) | E (mm) | H (mm) | W (mm) | RFQ |
|---|---|---|---|---|---|---|---|---|
| AISI 316 | 1/4" | 55 | 10.5 | 14.2 | 9.5 | 50 | 95 | |
| AISI 316 | 3/8" | 55 | 12 | 17.6 | 9.5 | 50 | 95 | |
| AISI 316 | 1/2" | 62 | 15 | 21.8 | 9.5 | 60 | 95 | |
| AISI 316 | 3/4" | 72 | 20 | 21.8 | 12.5 | 64 | 115 | |
| AISI 316 | 1" | 84 | 25 | 27.2 | 12.5 | 71 | 135 | |
| AISI 316 | 1"1/4 | 97 | 32 | 33.9 | 12.5 | 78 | 150 | |
| AISI 316 | 1"1/2 | 104 | 38 | 42.7 | 12.5 | 86 | 160 | |
| AISI 316 | 2" | 120 | 49 | 48.8 | 16 | 95 | 180 |
Technical documentation and supply
Specify the application and required documentation. Dimensions not shown here and supply availability are confirmed for the selected configuration.
Component materials
- Body, connector, ball and stem
- AISI 316
- Lever, lever nut, washer and gland
- AISI 304
- Seats, packing and seals
- PTFE
Service data and test pressures
- Declared rating
- 1000 WOG
- Temperature range
- −20 °C / +120 °C
- Liquid leak test
- 7,1 MPa
- Gas leak test
- 0,6 MPa
Test pressures are not working-pressure ratings. Confirm the pressure/temperature combination and medium compatibility for the specific valve.