Industrial rivets: families, materials, standards and technical finder. Compare designs and prepare your enquiry to Dueemme Sidol.
Dueemme Sidol S.r.l. is an Italian supplier based in Sesto San Giovanni, Milan. We supply industrial customers and OEMs with screws, bolts, stainless steel fasteners and custom components manufactured to drawing. This section helps specify rivets for permanent joints by access, materials and service conditions.
Filter families, designs and selected verified dimensional examples. Results support your technical enquiry; size, performance and availability require part-specific confirmation.
Numeric filters return only examples with verified data. Undocumented values are not treated as matches. Results do not constitute a joint design.
Loading references…
An open body and a break mandrel form the joint from the accessible side. Dome heads suit general assemblies, countersunk heads require a matching seat, and large flanges spread contact on the visible side.
Features and selection →A closed end blocks the path through the rivet body. Joint sealing also depends on the head contact, hole and any sealing element specified for the selected design.
Features and selection →A dedicated geometry lets one size cover a range of joint thicknesses. The grip range belongs to the selected part number and is different from body length.
Features and selection →Designs intended for load transfer and mandrel locking. Selection considers shear, tension, mandrel retention and the behaviour of the joined material.
Features and selection →The body splits into several sectors during setting, increasing blind-side bearing area. This geometry differs from a large flange on the accessible side.
Features and selection →Three blind-side legs distribute clamping across a broad area. Some versions include an under-head seal; that feature must be confirmed in the individual part specification.
Features and selection →Body grooves support anchoring for designs intended for soft substrates and blind holes. Hole diameter and depth are part of the fastening specification.
Features and selection →Rivets incorporating a terminal for an electrical connection to a component. Reference designs use a copper body, copper-plated steel mandrel and brass terminal.
Features and selection →Rivets supplied in sequence on a reusable mandrel for repetitive assembly. The setting system and rivet geometry must be assessed as a specific combination.
Features and selection →Rivet fasteners with a polymer body for panels and lightweight components. Their function depends on expansion geometry, pin and the actual polymer used.
Features and selection →The shank is upset opposite the manufactured head to form a closing head. Solid, semi-tubular and tubular designs differ in body section and the geometry to be deformed.
Features and selection →| Parameter | Required information |
|---|---|
| Geometry | Diameter d, length L, head type and envelope; drawing if available. |
| Grip stack | Minimum and maximum total thickness, layer count, materials and coatings. |
| Hole and access | Diameter and tolerance, through or blind hole, rear access and clearance. |
| Performance | Shear, tension, vibration, any sealing requirement and operating conditions. |
| Documentation | Standard with edition, required test report or document and agreed traceability. |
| Identified example | d × L (mm) | Head D / k (mm) | Hole (mm) | Grip (mm) | Shear / tension (N) |
|---|---|---|---|---|---|
| AFT 0000100.01000 ↗ | 2.4 × 5 | 5 / 1 | 2.5 | 0.8–2.5 | 350 / 500 |
| IITA2 0041900.01000 ↗ | 3.2 × 6 | 6.7 / 1.3 | 3.3 | 1–3 | 1800 / 2500 |
| SRFT 008950S.00010 ↗ | 3.2 × 6.5 | — / — | — | 0.5–2 | — / — |
| GORIV 0094300.01000 ↗ | 4 × 8 | 8 / 1.3 | 4.1 | maximum 4 | 850 / 1200 |
Values apply only to the listed part numbers. Loads are catalogue figures, not allowable design loads. Ordering requires technical confirmation, drawing and availability. “—” means no value is reported.
Measure the stack and select a part whose minimum–maximum grip includes that thickness. Body length and grip are different dimensions.
Use the diameter and tolerance in the individual part specification. There is no universal allowance across families; check burrs, ovality and alignment.
Check body and mandrel alloy, exposure, chlorides and joined materials. The words stainless or A4 do not qualify the complete joint.
Send the family or code, dimensions, grip, materials, quantity and documentation requirements. Dueemme Sidol checks the specification and availability before confirmation.
Original Dueemme Sidol editorial content. Classification checked against public Rivit pages; standards cross-checked with ISO and DIN Media. Series names identify their owners’ technical references and do not imply authorised distribution.
Editorial verification: 4 November 2026. Specification, documentation and availability subject to quotation confirmation.
