Rivet standards and technical data
ISO rivet standards, withdrawn DIN 7337 and sourced dimensional tables. Distinguish catalogue values from project requirements.
Verified standards and scope.
| Reference | Scope | Nominal diameters in ISO scope (mm) |
|---|---|---|
| ISO 15977:2002 ↗ | Open · dome · AlA/St | 2,4–6,4 |
| ISO 15978:2002 ↗ | Open · countersunk · AlA/St | 2,4–5 |
| ISO 15979:2002 ↗ | Open · dome · St/St | 2,4–6,4 |
| ISO 15983:2002 ↗ | Open · dome · A2/A2 | 3–5 |
| ISO 15984:2002 ↗ | Open · countersunk · A2/A2 | 3–5 |
| ISO 15973:2000 ↗ | Closed · dome · AlA/St | — |
| ISO 15975:2002 ↗ | Closed · dome · Al/AlA | 3,2–4,8 |
| ISO 14589:2000 ↗ | Mechanical testing of blind rivets | — |
AlA = aluminium alloy; Al = commercially pure aluminium; St = steel. The sequence means body/mandrel. A standard’s scope does not describe Dueemme Sidol stock sizes. Referencing a standard does not declare product conformity.
DIN 7337: a withdrawn historical reference.
DIN Media lists DIN 7337:1991-08 as withdrawn and identifies several EN ISO replacements. This is not a universal equivalence: identify head, materials and requirements for each part. DIN Media ↗
Dimensions and loads: sourced examples.
| Identified example | d × L (mm) | Head D / k (mm) | Hole (mm) | Grip (mm) | Shear / tension (N) |
|---|---|---|---|---|---|
| AFT 0000100.01000 ↗ | 2.4 × 5 | 5 / 1 | 2.5 | 0.8–2.5 | 350 / 500 |
| IITA2 0041900.01000 ↗ | 3.2 × 6 | 6.7 / 1.3 | 3.3 | 1–3 | 1800 / 2500 |
| SRFT 008950S.00010 ↗ | 3.2 × 6.5 | — / — | — | 0.5–2 | — / — |
| GORIV 0094300.01000 ↗ | 4 × 8 | 8 / 1.3 | 4.1 | maximum 4 | 850 / 1200 |
Values apply only to the listed part numbers. Loads are catalogue figures, not allowable design loads. Ordering requires technical confirmation, drawing and availability. “—” means no value is reported.
How to read the data.
d is body diameter; L is body length; D and k are head diameter and thickness in the table. Grip range is the stack thickness allowed for that part. Hole diameter differs from nominal body diameter. Catalogue loads do not automatically include safety factors, joint geometry, sheet bearing, fatigue or substrate pull-out.
Frequently asked questions.
How do I choose rivet length?
Measure the stack and select a part whose minimum–maximum grip includes that thickness. Body length and grip are different dimensions.
What hole diameter is required?
Use the diameter and tolerance in the individual part specification. There is no universal allowance across families; check burrs, ovality and alignment.
Is a stainless rivet always suitable for marine use?
Check body and mandrel alloy, exposure, chlorides and joined materials. The words stainless or A4 do not qualify the complete joint.
How can I request a quotation and technical documents?
Send the family or code, dimensions, grip, materials, quantity and documentation requirements. Dueemme Sidol checks the specification and availability before confirmation.
Prepare your technical enquiry.
Sources and further reading.
Original Dueemme Sidol editorial content. Classification checked against public Rivit pages; standards cross-checked with ISO and DIN Media. Series names identify their owners’ technical references and do not imply authorised distribution.
Editorial verification: 4 November 2026. Specification, documentation and availability subject to quotation confirmation.