Solid, semi-tubular and tubular rivets
The shank is upset opposite the manufactured head to form a closing head. Solid, semi-tubular and tubular designs differ in body section and the geometry to be deformed.
Features and applications.
Require access and support compatible with upsetting. Length includes the allowance needed to form the closing head; define it from drawing, material and process rather than a universal extra length.
What to check
Start from the joint drawing rather than nominal diameter alone. Establish the grip stack, hole tolerances and space for setting. State whether the main load is shear, tension or pull-out from the substrate.
Materials and design
Specify body and mandrel or pin separately, together with head, finish and exposure. Assess contact compatibility for dissimilar materials; request part-specific confirmation for special requirements.
Selection data.
| Parameter | Required information |
|---|---|
| Geometry | Diameter d, length L, head type and envelope; drawing if available. |
| Grip stack | Minimum and maximum total thickness, layer count, materials and coatings. |
| Hole and access | Diameter and tolerance, through or blind hole, rear access and clearance. |
| Performance | Shear, tension, vibration, any sealing requirement and operating conditions. |
| Documentation | Standard with edition, required test report or document and agreed traceability. |
Standards and documentation.
For this family, the manufacturer specification and individual part drawing are essential. We do not assign a generic ISO standard to special, structural or solid rivets without documentary evidence.
Frequently asked questions.
When should I choose this family?
Require access and support compatible with upsetting. Length includes the allowance needed to form the closing head; define it from drawing, material and process rather than a universal extra length.
How do I choose rivet length?
Measure the stack and select a part whose minimum–maximum grip includes that thickness. Body length and grip are different dimensions.
What hole diameter is required?
Use the diameter and tolerance in the individual part specification. There is no universal allowance across families; check burrs, ovality and alignment.
Is a stainless rivet always suitable for marine use?
Check body and mandrel alloy, exposure, chlorides and joined materials. The words stainless or A4 do not qualify the complete joint.
How can I request a quotation and technical documents?
Send the family or code, dimensions, grip, materials, quantity and documentation requirements. Dueemme Sidol checks the specification and availability before confirmation.
Prepare your technical enquiry.
Sources and further reading.
Original Dueemme Sidol editorial content. Classification checked against public Rivit pages; standards cross-checked with ISO and DIN Media. Series names identify their owners’ technical references and do not imply authorised distribution.
- Rivit · Solid, semi-tubular and tubular rivets ↗
- Standards, tables and data sources
- Rivet materials guide
Editorial verification: 4 November 2026. Specification, documentation and availability subject to quotation confirmation.