Reinforced inch shaft rings
Select a technical variant and compare the configuration dimensions.
- Reference
- Dedicated geometry
- Application
- Shafts
Family illustration.
Technical drawing
- d
- Reference diameter
- s
- Ring thickness
- m
- Groove width
- d2 / 2
- Groove half-diameter
Original dimension-reference diagram, not to scale: the illustrated geometry is indicative. Documented dimensions are listed in the tables; the variant production drawing is confirmed with the quotation.
Variants and dimensional data
| Size / reference mm | Thickness / wire mm |
|---|---|
| 10.0 | 0.889 |
| 10.9 | 0.889 |
| 12.0 | 1.0668 |
| 12.7 | 1.27 |
| 15.0 | 1.27 |
| 15.9 | 1.27 |
| 17.0 | 1.27 |
| 19.0 | 1.9812 |
| 22.2 | 1.9812 |
| 25.4 | 1.9812 |
| 27.0 | 2.3622 |
| 28.6 | 2.3622 |
| 30.2 | 2.3622 |
| 31.7 | 2.3622 |
| 33.3 | 2.3622 |
| 34.9 | 2.3622 |
| 38.1 | 2.7686 |
| 39.7 | 2.7686 |
| 44.4 | 2.7686 |
| 49.2 | 3.175 |
| 50.8 | 3.175 |
| - | 0.0 |
Reference nominal dimensions. “-” means undocumented, not zero. Inch dimensions are shown separately.
Ring dimensions · in · 22
| Reference mm | d1 | s | d3 |
|---|---|---|---|
| - | - | 0.000 | 0.000 |
| 10.0 | 0.394 | 0.035 | 0.362 |
| 10.9 | 0.428 | 0.035 | 0.394 |
| 12.0 | 0.473 | 0.042 | 0.435 |
| 12.7 | 0.500 | 0.050 | 0.460 |
| 15.0 | 0.591 | 0.050 | 0.543 |
| 15.9 | 0.625 | 0.050 | 0.575 |
| 17.0 | 0.669 | 0.050 | 0.616 |
| 19.0 | 0.750 | 0.078 | 0.689 |
| 22.2 | 0.875 | 0.078 | 0.804 |
| 25.4 | 1.000 | 0.078 | 0.906 |
| 27.0 | 1.062 | 0.093 | 0.978 |
| 28.6 | 1.125 | 0.093 | 1.036 |
| 30.2 | 1.188 | 0.093 | 1.087 |
| 31.7 | 1.250 | 0.093 | 1.150 |
| 33.3 | 1.312 | 0.093 | 1.208 |
| 34.9 | 1.375 | 0.093 | 1.268 |
| 38.1 | 1.500 | 0.109 | 1.380 |
| 39.7 | 1.562 | 0.109 | 1.437 |
| 44.4 | 1.750 | 0.109 | 1.608 |
| 49.2 | 1.938 | 0.125 | 1.782 |
| 50.8 | 2.000 | 0.125 | 1.840 |
Groove dimensions · mm · 22
| Reference | d2 | Tolerance + / - | m | m tol. | n min |
|---|---|---|---|---|---|
| 10.0 | 9.3472 | - | - | - / - | - |
| 10.9 | 10.2108 | - | - | - / - | - |
| 12.0 | 11.2776 | - | - | - / - | - |
| 12.7 | 11.8872 | - | - | - / - | - |
| 15.0 | 14.097 | - | - | - / - | - |
| 15.9 | 14.9352 | - | - | - / - | - |
| 17.0 | 15.9766 | - | - | - / - | - |
| 19.0 | 17.8816 | - | - | - / - | - |
| 22.2 | 20.8534 | - | - | - / - | - |
| 25.4 | 23.8252 | - | - | - / - | - |
| 27.0 | 25.3492 | - | - | - / - | - |
| 28.6 | 26.8986 | - | - | - / - | - |
| 30.2 | 28.2194 | - | - | - / - | - |
| 31.7 | 29.8196 | - | - | - / - | - |
| 33.3 | 31.3436 | - | - | - / - | - |
| 34.9 | 32.7914 | - | - | - / - | - |
| 38.1 | 35.7124 | - | - | - / - | - |
| 39.7 | 37.2872 | - | - | - / - | - |
| 44.4 | 41.91 | - | - | - / - | - |
| 49.2 | 46.3804 | - | - | - / - | - |
| 50.8 | 47.752 | - | - | - / - | - |
| - | 0.0 | - | - | - / - | - |
Materials and finishes
Selection and application
Installed along the component axis. First distinguish external shaft rings from internal bore rings, then check thickness, groove diameter and available axial space. Reinforced versions have a distinct dimensional configuration.
Other materials and finishes are available on request. Configuration and supply are confirmed against the specific enquiry.
Size compatibility: materials and finishes
| Size / reference mm | Thickness / wire mm | Material | Finish |
|---|---|---|---|
| 10.0 | 0.889 | Steel | Phosphated or blackened, oiled |
| 10.9 | 0.889 | Steel | Phosphated or blackened, oiled |
| 12.0 | 1.0668 | Steel | Phosphated or blackened, oiled |
| 12.7 | 1.27 | Steel | Phosphated or blackened, oiled |
| 15.0 | 1.27 | Steel | Phosphated or blackened, oiled |
| 15.9 | 1.27 | Steel | Phosphated or blackened, oiled |
| 17.0 | 1.27 | Steel | Phosphated or blackened, oiled |
| 19.0 | 1.9812 | Steel | Phosphated or blackened, oiled |
| 22.2 | 1.9812 | Steel | Phosphated or blackened, oiled |
| 25.4 | 1.9812 | Steel | Phosphated or blackened, oiled |
| 27.0 | 2.3622 | Steel | Phosphated or blackened, oiled |
| 28.6 | 2.3622 | Steel | Phosphated or blackened, oiled |
| 30.2 | 2.3622 | Steel | Phosphated or blackened, oiled |
| 31.7 | 2.3622 | Steel | Phosphated or blackened, oiled |
| 33.3 | 2.3622 | Steel | Phosphated or blackened, oiled |
| 34.9 | 2.3622 | Steel | Phosphated or blackened, oiled |
| 38.1 | 2.7686 | Steel | Phosphated or blackened, oiled |
| 39.7 | 2.7686 | Steel | Phosphated or blackened, oiled |
| 44.4 | 2.7686 | Steel | Phosphated or blackened, oiled |
| 49.2 | 3.175 | Steel | Phosphated or blackened, oiled |
| 50.8 | 3.175 | Steel | Phosphated or blackened, oiled |
| - | 0.0 | Steel | Phosphated or blackened, oiled |
Find the configuration
Choose the assembly, shaft or bore and diameter. Add material and dimensions to refine your search.