Standard toggle latches
AISI 304 / A2 stainless steel toggle latches. Compare type, catch geometry and mounting dimensions. State the required configuration and operating conditions in your enquiry.
- Material
- AISI 304 / A2
Technical drawing
Dimensions in mm. Vector drawings are not to scale; match the configuration to its type letter. Check the delivered product before drilling. Catalogue loads are indicative; ultimate tension is not working load.
Configuration A
Type A: lever base length 22 mm; catch plate length 28 mm; draw-bail section 2 mm.
Configuration B
Type B: catch plate length 15 mm and width 22 mm; draw-bail section 2 mm.
Configuration C
Type C: the vertical and horizontal 17 mm dimensions refer to the segments shown in the drawing; they do not define the overall envelope. Base 30 mm; lever and hook thickness 1.5 mm.
Configuration D
Type D: lever base length 18 mm, catch plate length 13 mm; draw-bail section 2 mm. Base width is 43 mm in the updated sheet.
Configuration F
Type F: lever base length 44 mm; catch plate 30 × 13 mm; draw-bail section 2 mm.
Configuration G
Type G: draw-bail outside width 28 mm, section 3 mm; catch plate 36 × 19 mm. Additional dimensions and centre distances are shown directly in the drawing.
Configuration H
Type H: lever base 90 mm, indicated lever length 112 mm; catch plate 66 × 27 mm; draw-bail section 4 mm. Hole centres and edge distances are shown in the drawing.
Variants and dimensional data
| Type | Indicated length / adjustable span (mm) | Indicated width (mm) | Indicated vertical dimension (mm) | Main holes Ø (mm) | Countersink Ø (mm) | Indicative maximum working load (approx. kg) | Ultimate tension (approx. kg) | RFQ |
|---|---|---|---|---|---|---|---|---|
| A | 76,5 | 14,5 | 10,5 | 3,2 | 6 | 40 | 101 | |
| B | 55 | 15 | 12 | 3,2 | 6 | 56 | 101 | |
| C | 90 | 17 | 17 | 5,3 | 10 | 50 | 91 | |
| D | 52 | 43 | 11 | 3,2 | 6 | 56 | 152 | |
| F | 102 | 16,5 | 11 | 3,2 | 6 | 56 | 132 | |
| G | 115 | 15 | 17 | 4,3 | 8 | 101 | 254 | |
| H | 194 | 31 | 20 | 5,3 | 10 | 203 | 407 |
Table widths and heights refer to the indicated drawing segments, which do not always represent the maximum envelope. For types I and L the adjustable span is not overall length. Further dimensions and hole centres are shown in each type’s drawing.
Materials and finishes
- Material
- AISI 304 / A2
Material of the documented configuration. Specify supply conditions and finishes in the enquiry.
Working load and ultimate tension are separate ratings. The values shown do not constitute lifting certification; verify the service conditions for the selected variant.
Documentation and supply
State the quantity, application and documentation requirements in your enquiry. Availability and configuration are confirmed for the individual requirement.
Request a quote
Standard toggle latches
