Scaffold and netting anchors
Scaffold anchorage connects the designed scaffold elements to the substrate. Plug, eye and scaffold connection must be assessed in their actual combination.

Features and selection criteria
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
Dimensions transcribed from the listed sources, checked on 13 November 2026. “—” means not stated or not normalised, not zero. Nominal diameter, thread and drill diameter are distinct. Consult the specific variant documentation for loads, installation and permitted applications. Availability is confirmed at quotation.
Designs, materials and substrates
This family contains 13 series or reference groups, with 38 catalogue rows. Series photographs help distinguish geometries and fixing methods; they do not necessarily represent every size in the range.
Documented materials
Steel · Nylon
Substrates mentioned in the sources
Check the reference documentation.
This list describes the family and does not assign every substrate to every variant.
Information to define before selection
| Parameter | What to check |
|---|---|
| Load-bearing substrate | Material type, strength, any cracking, useful thickness and hole conditions. Compatibility must be established for the selected design and size. |
| Fixing geometry | Total length, body or thread diameter and drill diameter are distinct parameters. Through-fixings must allow for fixture thickness and non-load-bearing layers. |
| Depth and distances | Compare hole depth, nominal or effective anchorage depth, edge distances and spacing. A deeper hole does not automatically increase fixing capacity. |
| Environment and exposure | Check material and coating of all components, temperature and service conditions. A2, A4 and HCR stainless designs require selection appropriate to the environment. |
| Loads and documentation | Define action directions and combinations and check the part-specific document. Dimensional data identify the part but do not replace a design verification. |
Installation sequence to verify
- Identify actions and connection configuration specified for the scaffold or netting.
- Check the actual substrate and plug-and-eye combination.
- Install to the depth and procedure of the selected system.
- Perform the checks required by the design and applicable instructions.
This sequence guides the reading of the instructions. Diameters, depths, equipment and tightening values remain those of the specific variant.
Series and technical tables
FX01Tecfi · 2 referencesElement connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.Full description and technical table ↓

Series characteristics FX01
Element connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.
Materials represented by the variants: Steel.
Documented series dimensions: drill Ø 12 mm; length 80–105 mm; thread Ø 14 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Drill Ø d₀ (mm) | Length L (mm) | Material | Finish | Eye internal Ø (mm) | Thread Ø dth (mm) | Profondità di inserimento hnom |
|---|---|---|---|---|---|---|---|
| Tecfi FX 01 14 080 | 12 | 80 | Steel | Zinc plated | 23 | 14 | 75 |
| Tecfi FX 01 14 105 | 12 | 105 | Steel | Zinc plated | 23 | 14 | 100 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
FXL01Tecfi · 2 referencesElement connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.Full description and technical table ↓

Series characteristics FXL01
Element connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.
Materials represented by the variants: Steel.
Documented series dimensions: drill Ø 12 mm; length 110–170 mm; thread Ø 14 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Drill Ø d₀ (mm) | Length L (mm) | Material | Finish | Eye internal Ø (mm) | Thread Ø dth (mm) | Profondità di inserimento hnom |
|---|---|---|---|---|---|---|---|
| Tecfi FXL 01 14 110 | 12 | 110 | Steel | Zinc plated | 50 | 14 | 50 |
| Tecfi FXL 01 14 170 | 12 | 170 | Steel | Zinc plated | 50 | 14 | 50 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DE02Tecfi · 2 referencesElement connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.Full description and technical table ↓

Series characteristics DE02
Element connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.
Materials represented by the variants: Steel.
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Material | Finish | Design | Nominal Ø dnom (mm) | Misura golfare M | Misura golfare L (mm) | Length Lg (mm) | Eye internal Ø (mm) |
|---|---|---|---|---|---|---|---|---|
| Tecfi DE 02 10 120 | Steel | Zinc plated | In acciaio | 16 | M10 | 120 | 220 | — |
| Tecfi DE 02 10 170 | Steel | Zinc plated | In acciaio | 16 | M10 | 170 | 270 | 50 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DE03Tecfi · 2 referencesElement connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.Full description and technical table ↓

Series characteristics DE03
Element connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.
Materials represented by the variants: Steel.
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Eye internal Ø (mm) | Material | Finish | Design | Nominal Ø dnom (mm) | Misura golfare M | Misura golfare L (mm) | Length Lg (mm) |
|---|---|---|---|---|---|---|---|---|
| Tecfi DE 03 12 120 | 50 | Steel | Zinc plated | In acciaio | 18 | M12 | 120 | 220 |
| Tecfi DE 03 12 170 | 50 | Steel | Zinc plated | In acciaio | 18 | M12 | 170 | 270 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
LW01Tecfi · 3 referencesElement connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.Full description and technical table ↓

Series characteristics LW01
Element connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.
Materials represented by the variants: Steel.
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Eye internal Ø (mm) | Material | Finish | Design | Nominal Ø dnom (mm) | Misura golfare M | Misura golfare L (mm) | Length Lg (mm) |
|---|---|---|---|---|---|---|---|---|
| Tecfi LW 01 12 110 | 23 | Steel | Zinc plated | In acciaio | 12 | M8 | 110 | 135 |
| Tecfi LW 01 12 160 | 23 | Steel | Zinc plated | In acciaio | 12 | M8 | 160 | 185 |
| Tecfi LW 01 12 190 | 23 | Steel | Zinc plated | In acciaio | 12 | M8 | 190 | 215 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
LQ01Tecfi · 10 referencesElement connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.Full description and technical table ↓

Series characteristics LQ01
Element connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.
Materials represented by the variants: Nylon, Steel.
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Eye internal Ø (mm) | Material | Finish | Design | Anchor body Ø (mm) | Anchor length (mm) | Diameter golfare Ø (mm) | Misura golfare L (mm) |
|---|---|---|---|---|---|---|---|---|
| Tecfi LQ 01 12 100 | 50 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 100 |
| Tecfi LQ 01 12 120 | 50 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 120 |
| Tecfi LQ 01 12 140 | 50 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 140 |
| Tecfi LQ 01 12 160 | 50 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 160 |
| Tecfi LQ 01 12 200 | 50 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 200 |
| Tecfi LQ 01 12 240 | 50 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 240 |
| Tecfi LQ 01 12 300 | 50 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 300 |
| Tecfi LQ 01 12 350 | 50 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 350 |
| Tecfi LQ 01 12 400 | 50 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 400 |
| Tecfi LQ 01 12 500 | 50 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 500 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
LS01Tecfi · 2 referencesElement connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.Full description and technical table ↓

Series characteristics LS01
Element connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.
Materials represented by the variants: Nylon, Steel.
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Eye internal Ø (mm) | Material | Finish | Design | Anchor body Ø (mm) | Anchor length (mm) | Diameter golfare Ø (mm) | Misura golfare L (mm) |
|---|---|---|---|---|---|---|---|---|
| Tecfi LS 01 12 160 | 50 | Nylon / Acciaio | Zinc plated | In nylon | 16 | 140 | 12 | 160 |
| Tecfi LS 01 12 200 | 50 | Nylon / Acciaio | Zinc plated | In nylon | 16 | 140 | 12 | 200 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
LV01Tecfi · 1 referencesElement connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.Full description and technical table ↓

Series characteristics LV01
Element connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.
Materials represented by the variants: Nylon, Steel.
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Eye internal Ø (mm) | Material | Finish | Design | Anchor body Ø (mm) | Anchor length (mm) | Diameter golfare Ø (mm) | Misura golfare L (mm) |
|---|---|---|---|---|---|---|---|---|
| Tecfi LV 01 12 200 | 50 | Nylon / Acciaio | Zinc plated | In nylon | 16 | 160 | 12 | 200 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DF01Tecfi · 8 referencesElement connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.Full description and technical table ↓

Series characteristics DF01
Element connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: eye end.
Materials represented by the variants: Nylon, Steel.
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Eye internal Ø (mm) | Material | Finish | Design | Anchor body Ø (mm) | Anchor length (mm) | Diameter golfare Ø (mm) | Misura golfare L (mm) |
|---|---|---|---|---|---|---|---|---|
| Tecfi DF 01 12 120 | 23 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 120 |
| Tecfi DF 01 12 160 | 23 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 160 |
| Tecfi DF 01 12 190 | 23 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 190 |
| Tecfi DF 01 12 230 | 23 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 230 |
| Tecfi DF 01 12 300 | 23 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 300 |
| Tecfi DF 01 12 350 | 23 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 350 |
| Tecfi DF 01 12 450 | 23 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 450 |
| Tecfi DF 01 12 500 | 23 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 100 | 12 | 500 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DXE25Tecfi · 2 referencesElement connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: hook end.Full description and technical table ↓

Series characteristics DXE25
Element connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: hook end.
Materials represented by the variants: Steel.
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Material | Finish | Design | Nominal Ø dnom (mm) | Length ancorante L (mm) | Misura gancio M | Length Lg (mm) |
|---|---|---|---|---|---|---|---|
| Tecfi DXE 25 15 060 | Steel | Zinc plated | In acciaio | 15 | 60 | M10 | 110 |
| Tecfi DXE 25 18 075 | Steel | Zinc plated | In acciaio | 18 | 75 | M12 | 125 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DXE35Tecfi · 1 referencesElement connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: hook end.Full description and technical table ↓

Series characteristics DXE35
Element connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: hook end.
Materials represented by the variants: Steel.
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Material | Finish | Design | Nominal Ø dnom (mm) | Length ancorante L (mm) | Misura gancio M | Length Lg (mm) |
|---|---|---|---|---|---|---|---|
| Tecfi DXE 35 18 075 | Steel | Zinc plated | In acciaio | 18 | 75 | M12 | 135 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
MR01Tecfi · 2 referencesElement connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: hook end.Full description and technical table ↓

Series characteristics MR01
Element connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: hook end.
Materials represented by the variants: Nylon, Steel.
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Material | Finish | Design | Anchor body Ø (mm) | Anchor length (mm) | Misura gancio M | Length Lg (mm) |
|---|---|---|---|---|---|---|---|
| Tecfi MR 01 10 140 | Nylon / Acciaio | Zinc plated | In nylon | 12 | 60 | 10 | 140 |
| Tecfi MR 01 12 140 | Nylon / Acciaio | Zinc plated | In nylon | 14 | 75 | 12 | 140 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
LZ25Tecfi · 1 referencesElement connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: hook end.Full description and technical table ↓

Series characteristics LZ25
Element connecting a scaffold or netting to the substrate in the specified configuration. Selection considers anchor, end element and connection together. Series design: hook end.
Materials represented by the variants: Steel.
Specify design actions, substrate, depth and connection configuration. A netting fixing or commercial eye is not automatically suitable for scaffolds, lifting or personal protection.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Material | Finish | Design | Nominal Ø dnom (mm) | Length ancorante L (mm) | Misura gancio M | Length Lg (mm) |
|---|---|---|---|---|---|---|---|
| Tecfi LZ 25 10 080 | Steel | Zinc plated | In acciaio | 10 | 80 | M8 | 120 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
Anchor finder
Search by part number or select declared characteristics. Missing data do not satisfy a dimensional filter.
Request technical review or a quotation
Select a finder reference or describe the application.
FAQ
How do I select an anchor?
Start with substrate, load and environment, then identify configuration, depth, distances and part-specific documentation. The finder selects catalogue references and does not perform a design check.
Does equal diameter mean equal capacity?
No. Geometry, material, anchorage and technical assessment may differ. Dimensional comparison does not establish technical equivalence or interchangeability.
Do all anchors have an ETA and CE marking?
These cannot be assigned to an entire category. Check the product documentation, scope and applicability to the specific size. An ETA link does not extend its assessment to other parts.
What information is needed for an enquiry?
Part number or family, quantity, substrate material and condition, thicknesses, fixing geometry, environment, actions and required documents. For resins, also specify temperature and hole conditions.
Sources and documentation
Dimensions transcribed from the listed sources, checked on 13 November 2026. “—” means not stated or not normalised, not zero. Nominal diameter, thread and drill diameter are distinct. Consult the specific variant documentation for loads, installation and permitted applications. Availability is confirmed at quotation.
Dueemme Sidol S.r.l. · Sesto San Giovanni, Milan · Supply for industrial customers and OEMs.