Anchor standards and technical data
Industrial anchors and fixings: families, materials, Tecfi and EJOT references, finder and technical documentation.
Reading standards and technical assessments
An EAD is a European Assessment Document; an ETA concerns a product and its assessed scope. The declaration of performance and installation instructions complete part-specific verification. We do not assign an ETA to an entire commercial family.
Verifiable references
- EN 1992-4: design of fastenings for use in concrete. Check the applicable edition and national annex for the project.
- EAD 330232: mechanical fasteners in concrete.
- EAD 330499: bonded fasteners in concrete.
- EAD 330284: plastic anchors for redundant non-structural systems in concrete and masonry.
- EAD 330196: plastic anchors for ETICS.
Use the full number and edition cited in the product ETA. A newer edition in the EOTA archive does not automatically amend an earlier ETA.
Loads and installation
We do not publish a single load capacity per diameter. Verification depends on substrate, strength, cracking, depth, edges, spacing, action directions, environmental conditions and component combination. Tightening torque, hole cleaning and curing times must follow the manufacturer’s procedure.
Seismic action, fire and cracked concrete
Check these scopes in the precise variant documentation. Stainless material, diameter or a heavy-duty designation do not establish suitability.
Anchor finder
Search by part number or select declared characteristics. Missing data do not satisfy a dimensional filter.
Request technical review or a quotation
Select a finder reference or describe the application.
FAQ
How do I select an anchor?
Start with substrate, load and environment, then identify configuration, depth, distances and part-specific documentation. The finder selects catalogue references and does not perform a design check.
Does equal diameter mean equal capacity?
No. Geometry, material, anchorage and technical assessment may differ. Dimensional comparison does not establish technical equivalence or interchangeability.
Do all anchors have an ETA and CE marking?
These cannot be assigned to an entire category. Check the product documentation, scope and applicability to the specific size. An ETA link does not extend its assessment to other parts.
What information is needed for an enquiry?
Part number or family, quantity, substrate material and condition, thicknesses, fixing geometry, environment, actions and required documents. For resins, also specify temperature and hole conditions.
Sources and documentation
Dimensions transcribed from the listed sources, checked on 13 November 2026. “—” means not stated or not normalised, not zero. Nominal diameter, thread and drill diameter are distinct. Consult the specific variant documentation for loads, installation and permitted applications. Availability is confirmed at quotation.
Dueemme Sidol S.r.l. · Sesto San Giovanni, Milan · Supply for industrial customers and OEMs.