Nylon and plastic plugs
The polymer body expands against the hole wall as the specified screw is inserted. Rib geometry, screw diameter and anchorage length determine how the system works.

Features and selection criteria
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
Dimensions transcribed from the listed sources, checked on 13 November 2026. “—” means not stated or not normalised, not zero. Nominal diameter, thread and drill diameter are distinct. Consult the specific variant documentation for loads, installation and permitted applications. Availability is confirmed at quotation.
Designs, materials and substrates
This family contains 45 series or reference groups, with 128 catalogue rows. Series photographs help distinguish geometries and fixing methods; they do not necessarily represent every size in the range.
Documented materials
Nylon · Other polymers · Steel
Substrates mentioned in the sources
Check the reference documentation.
This list describes the family and does not assign every substrate to every variant.
Information to define before selection
| Parameter | What to check |
|---|---|
| Load-bearing substrate | Material type, strength, any cracking, useful thickness and hole conditions. Compatibility must be established for the selected design and size. |
| Fixing geometry | Total length, body or thread diameter and drill diameter are distinct parameters. Through-fixings must allow for fixture thickness and non-load-bearing layers. |
| Depth and distances | Compare hole depth, nominal or effective anchorage depth, edge distances and spacing. A deeper hole does not automatically increase fixing capacity. |
| Environment and exposure | Check material and coating of all components, temperature and service conditions. A2, A4 and HCR stainless designs require selection appropriate to the environment. |
| Loads and documentation | Define action directions and combinations and check the part-specific document. Dimensional data identify the part but do not replace a design verification. |
Installation sequence to verify
- Identify the load-bearing material behind the finish.
- Drill using the diameter, depth and method specified for the plug.
- Insert the body and use a screw of compatible diameter and length.
- Check fixture bearing and absence of plug rotation or damage.
This sequence guides the reading of the instructions. Diameters, depths, equipment and tightening values remain those of the specific variant.
Series and technical tables
AX01Tecfi · 6 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX01
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon.
Documented series dimensions: nominal Ø 5–14 mm; length 25–75 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material |
|---|---|---|---|
| Tecfi AX 01 05 025 | 5 | 25 | Nylon |
| Tecfi AX 01 06 030 | 6 | 30 | Nylon |
| Tecfi AX 01 08 040 | 8 | 40 | Nylon |
| Tecfi AX 01 10 050 | 10 | 50 | Nylon |
| Tecfi AX 01 12 060 | 12 | 60 | Nylon |
| Tecfi AX 01 14 080 | 14 | 75 | Nylon |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AX30Tecfi · 5 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX30
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon.
Documented series dimensions: nominal Ø 5–12 mm; length 25–60 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material |
|---|---|---|---|
| Tecfi AX 30 05 025 | 5 | 25 | Nylon |
| Tecfi AX 30 06 030 | 6 | 30 | Nylon |
| Tecfi AX 30 08 040 | 8 | 40 | Nylon |
| Tecfi AX 30 10 050 | 10 | 50 | Nylon |
| Tecfi AX 30 12 060 | 12 | 60 | Nylon |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AX06Tecfi · 6 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX06
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon.
Documented series dimensions: nominal Ø 5–14 mm; length 25–75 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material |
|---|---|---|---|
| Tecfi AX 06 05 025 | 5 | 25 | Nylon |
| Tecfi AX 06 06 030 | 6 | 30 | Nylon |
| Tecfi AX 06 08 040 | 8 | 40 | Nylon |
| Tecfi AX 06 10 050 | 10 | 50 | Nylon |
| Tecfi AX 06 12 060 | 12 | 60 | Nylon |
| Tecfi AX 06 14 080 | 14 | 75 | Nylon |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AX02Tecfi · 10 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX02
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon.
Documented series dimensions: nominal Ø 4–16 mm; length 20–100 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material |
|---|---|---|---|
| Tecfi AX 02 04 020 | 4 | 20 | Nylon |
| Tecfi AX 02 05 025 | 5 | 25 | Nylon |
| Tecfi AX 02 06 030 | 6 | 30 | Nylon |
| Tecfi AX 02 07 030 | 7 | 30 | Nylon |
| Tecfi AX 02 08 040 | 8 | 40 | Nylon |
| Tecfi AX 02 10 050 | 10 | 50 | Nylon |
| Tecfi AX 02 12 060 | 12 | 60 | Nylon |
| Tecfi AX 02 14 080 | 14 | 75 | Nylon |
| Tecfi AX 02 14 100 | 14 | 100 | Nylon |
| Tecfi AX 02 16 080 | 16 | 80 | Nylon |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AX31Tecfi · 7 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX31
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon.
Documented series dimensions: nominal Ø 4–12 mm; length 20–60 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material |
|---|---|---|---|
| Tecfi AX 31 04 020 | 4 | 20 | Nylon |
| Tecfi AX 31 05 025 | 5 | 25 | Nylon |
| Tecfi AX 31 06 030 | 6 | 30 | Nylon |
| Tecfi AX 31 07 030 | 7 | 30 | Nylon |
| Tecfi AX 31 08 040 | 8 | 40 | Nylon |
| Tecfi AX 31 10 050 | 10 | 50 | Nylon |
| Tecfi AX 31 12 060 | 12 | 60 | Nylon |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AX07Tecfi · 10 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX07
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon.
Documented series dimensions: nominal Ø 4–16 mm; length 20–100 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material |
|---|---|---|---|
| Tecfi AX 07 04 020 | 4 | 20 | Nylon |
| Tecfi AX 07 05 025 | 5 | 25 | Nylon |
| Tecfi AX 07 06 030 | 6 | 30 | Nylon |
| Tecfi AX 07 07 030 | 7 | 30 | Nylon |
| Tecfi AX 07 08 040 | 8 | 40 | Nylon |
| Tecfi AX 07 10 050 | 10 | 50 | Nylon |
| Tecfi AX 07 12 060 | 12 | 60 | Nylon |
| Tecfi AX 07 14 080 | 14 | 75 | Nylon |
| Tecfi AX 07 14 100 | 14 | 100 | Nylon |
| Tecfi AX 07 16 080 | 16 | 80 | Nylon |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AX03Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX03
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Other polymers.
Documented series dimensions: nominal Ø 6–8 mm; length 30–40 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material |
|---|---|---|---|
| Tecfi AX 03 06 030 | 6 | 30 | Nylon |
| Tecfi AX 03 08 040 | 8 | 40 | Nylon |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AX08Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX08
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Other polymers.
Documented series dimensions: nominal Ø 6–8 mm; length 30–40 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material |
|---|---|---|---|
| Tecfi AX 08 06 030 | 6 | 30 | Nylon |
| Tecfi AX 08 08 040 | 8 | 40 | Nylon |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AX04Tecfi · 1 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX04
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Other polymers.
Documented series dimensions: nominal Ø 14 mm; length 75 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material |
|---|---|---|---|
| Tecfi AX 04 14 080 | 14 | 75 | Nylon |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AX09Tecfi · 1 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX09
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Other polymers.
Documented series dimensions: nominal Ø 14 mm; length 75 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material |
|---|---|---|---|
| Tecfi AX 09 14 080 | 14 | 75 | Nylon |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AX05Tecfi · 5 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX05
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 5–10 mm; length 25–50 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Drive | Material | Finish | Diameter vite Øs | Length vite Ls |
|---|---|---|---|---|---|---|---|
| Tecfi AX 05 05 025 | 5 | 25 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 3.5 | 30 |
| Tecfi AX 05 06 030 | 6 | 30 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 4 | 40 |
| Tecfi AX 28 06 030 | 6 | 30 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 4.5 | 40 |
| Tecfi AX 05 08 040 | 8 | 40 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 5 | 50 |
| Tecfi AX 05 10 050 | 10 | 50 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 6 | 60 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AX12Tecfi · 4 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX12
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 5–10 mm; length 25–50 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Drive | Material | Finish | Diameter vite Øs | Length vite Ls |
|---|---|---|---|---|---|---|---|
| Tecfi AX 12 05 025 | 5 | 25 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 3.5 | 30 |
| Tecfi AX 12 06 030 | 6 | 30 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 4 | 40 |
| Tecfi AX 12 08 040 | 8 | 40 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 5 | 50 |
| Tecfi AX 12 10 050 | 10 | 50 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 6 | 60 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AX10Tecfi · 6 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX10
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 4–10 mm; length 20–50 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Drive | Material | Finish | Diameter vite Øs | Length vite Ls |
|---|---|---|---|---|---|---|---|
| Tecfi AX 10 04 020 | 4 | 20 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 3.5 | 30 |
| Tecfi AX 10 05 025 | 5 | 25 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 3.5 | 30 |
| Tecfi AX 10 06 030 | 6 | 30 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 4 | 40 |
| Tecfi AX 25 06 030 | 6 | 30 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 4.5 | 40 |
| Tecfi AX 10 08 040 | 8 | 40 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 5 | 50 |
| Tecfi AX 10 10 050 | 10 | 50 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 6 | 60 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AX13Tecfi · 4 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AX13
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 5–10 mm; length 25–50 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Drive | Material | Finish | Diameter vite Øs | Length vite Ls |
|---|---|---|---|---|---|---|---|
| Tecfi AX 13 05 025 | 5 | 25 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 3.5 | 30 |
| Tecfi AX 13 06 030 | 6 | 30 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 4 | 40 |
| Tecfi AX 13 08 040 | 8 | 40 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 5 | 50 |
| Tecfi AX 13 10 050 | 10 | 50 | Impronta a Croce tipo Z | Nylon / Acciaio | Zinc plated | 6 | 60 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AZ01Tecfi · 6 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AZ01
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 8–16 mm; length 40–100 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Diameter vite Øs | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi AZ 01 08 040 | 8 | 40 | Nylon / Acciaio | Zinc plated | 6 | 50 |
| Tecfi AZ 01 10 050 | 10 | 50 | Nylon / Acciaio | Zinc plated | 7 | 65 |
| Tecfi AZ 01 12 060 | 12 | 60 | Nylon / Acciaio | Zinc plated | 8 | 70 |
| Tecfi AZ 01 14 080 | 14 | 75 | Nylon / Acciaio | Zinc plated | 10 | 100 |
| Tecfi AZ 01 14 100 | 14 | 100 | Nylon / Acciaio | Zinc plated | 10 | 120 |
| Tecfi AZ 01 16 080 | 16 | 80 | Nylon / Acciaio | Zinc plated | 12 | 100 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
BV01Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls. Series design: conical expansion nut.Full description and technical table ↓

Series characteristics BV01
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls. Series design: conical expansion nut.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 12–14 mm; length 70–75 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M |
|---|---|---|---|---|---|
| Tecfi BV 01 12 070 | 12 | 70 | Nylon / Acciaio | Zinc plated | M8 |
| Tecfi BV 01 14 075 | 14 | 75 | Nylon / Acciaio | Zinc plated | M10 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
BV02Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls. Series design: conical expansion nut.Full description and technical table ↓

Series characteristics BV02
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls. Series design: conical expansion nut.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 12–14 mm; length 70–75 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi BV 02 12 070 | 12 | 70 | Nylon / Acciaio | Zinc plated | M8 | 80 |
| Tecfi BV 02 14 075 | 14 | 75 | Nylon / Acciaio | Zinc plated | M10 | 80 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY01Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY01
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 9–12 mm; length 40–45 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi AY 01 09 040 | 9 | 40 | Nylon / Acciaio | Zinc plated | M4 | 50 |
| Tecfi AY 01 12 045 | 12 | 45 | Nylon / Acciaio | Zinc plated | M5 | 50 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY02Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY02
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 9–12 mm; length 40–45 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi AY 02 09 040 | 9 | 40 | Nylon / Acciaio | Zinc plated | M4 | 43 |
| Tecfi AY 02 12 045 | 12 | 45 | Nylon / Acciaio | Zinc plated | M5 | 48 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY03Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY03
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 9–12 mm; length 40–45 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi AY 03 09 040 | 9 | 40 | Nylon / Acciaio | Zinc plated | M4 | 43 |
| Tecfi AY 03 12 045 | 12 | 45 | Nylon / Acciaio | Zinc plated | M5 | 48 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY04Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY04
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 9–12 mm; length 40–45 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi AY 04 09 040 | 9 | 40 | Nylon / Acciaio | Zinc plated | M4 | 43 |
| Tecfi AY 04 12 045 | 12 | 45 | Nylon / Acciaio | Zinc plated | M5 | 48 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY05Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY05
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 9–12 mm; length 40–45 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi AY 05 09 040 | 9 | 40 | Nylon / Acciaio | Zinc plated | M4 | 43 |
| Tecfi AY 05 12 045 | 12 | 45 | Nylon / Acciaio | Zinc plated | M5 | 48 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY06Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY06
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 9–12 mm; length 40–45 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi AY 06 09 040 | 9 | 40 | Nylon / Acciaio | Zinc plated | M4 | 43 |
| Tecfi AY 06 12 045 | 12 | 45 | Nylon / Acciaio | Zinc plated | M5 | 48 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY07Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY07
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 9–12 mm; length 40–45 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi AY 07 09 040 | 9 | 40 | Nylon / Acciaio | Zinc plated | M4 | 43 |
| Tecfi AY 07 12 045 | 12 | 45 | Nylon / Acciaio | Zinc plated | M5 | 48 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY1314Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY1314
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 9 mm; length 40 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M |
|---|---|---|---|---|---|
| Tecfi AY 13 09 040 | 9 | 40 | Nylon / Acciaio | Zinc plated | M4 |
| Tecfi AY 14 09 040 | 9 | 40 | Nylon / Acciaio | Zinc plated | M4 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY1516Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY1516
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 12 mm; length 45 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Intestazione codici |
|---|---|---|---|---|---|---|
| Tecfi AY 15 12 045 | 12 | 45 | Nylon / Acciaio | Zinc plated | M5 | Vite M5 - Paracolpo Ø 30mm |
| Tecfi AY 16 12 045 | 12 | 45 | Nylon / Acciaio | Zinc plated | M5 | Vite M5 - Paracolpo Ø 30mm |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY08Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY08
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 9–12 mm; length 47–50 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi AY 08 09 050 | 9 | 50 | Nylon / Acciaio | Zinc plated | M4 | 60 |
| Tecfi AY 08 12 057 | 12 | 47 | Nylon / Acciaio | Zinc plated | M5 | 65 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY09Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY09
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 9–12 mm; length 50–57 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi AY 09 09 050 | 9 | 50 | Nylon / Acciaio | Zinc plated | M4 | 60 |
| Tecfi AY 09 12 057 | 12 | 57 | Nylon / Acciaio | Zinc plated | M5 | 65 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY10Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY10
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 9–12 mm; length 50–57 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi AY 10 09 050 | 9 | 50 | Nylon / Acciaio | Zinc plated | M4 | 60 |
| Tecfi AY 10 12 057 | 12 | 57 | Nylon / Acciaio | Zinc plated | M5 | 65 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY11Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY11
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 9–12 mm; length 50–57 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi AY 11 09 050 | 9 | 50 | Nylon / Acciaio | Zinc plated | M4 | 60 |
| Tecfi AY 11 12 057 | 12 | 57 | Nylon / Acciaio | Zinc plated | M5 | 65 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
AY12Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics AY12
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Nylon, Steel.
Documented series dimensions: nominal Ø 9–12 mm; length 50–57 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi AY 12 09 050 | 9 | 50 | Nylon / Acciaio | Zinc plated | M4 | 60 |
| Tecfi AY 12 12 057 | 12 | 57 | Nylon / Acciaio | Zinc plated | M5 | 65 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY01Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY01
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 8–9 mm; length 35–40 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 01 08 035 | 8 | 35 | Steel | Zinc plated | M4 | 50 |
| Tecfi DY 01 09 040 | 9 | 40 | Steel | Zinc plated | M5 | 55 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY02Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY02
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 8–9 mm; length 35–40 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 02 08 035 | 8 | 35 | Steel | Zinc plated | M4 | 43 |
| Tecfi DY 02 09 040 | 9 | 40 | Steel | Zinc plated | M5 | 48 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY03Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY03
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 8–9 mm; length 35–40 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 03 08 035 | 8 | 35 | Steel | Zinc plated | M4 | 43 |
| Tecfi DY 03 09 040 | 9 | 40 | Steel | Zinc plated | M5 | 48 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY04Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY04
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 8–9 mm; length 35–40 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 04 08 035 | 8 | 35 | Steel | Zinc plated | M4 | 43 |
| Tecfi DY 04 09 040 | 9 | 40 | Steel | Zinc plated | M5 | 48 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY05Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY05
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 8–9 mm; length 35–40 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 05 08 035 | 8 | 35 | Steel | Zinc plated | M4 | 43 |
| Tecfi DY 05 09 040 | 9 | 40 | Steel | Zinc plated | M5 | 48 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY06Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY06
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 8–9 mm; length 35–40 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 06 08 035 | 8 | 35 | Steel | Zinc plated | M4 | 43 |
| Tecfi DY 06 09 040 | 9 | 40 | Steel | Zinc plated | M5 | 48 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY07Tecfi · 2 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY07
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 8–9 mm; length 35–40 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 07 08 035 | 8 | 35 | Steel | Zinc plated | M4 | 43 |
| Tecfi DY 07 09 040 | 9 | 40 | Steel | Zinc plated | M5 | 48 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY08Tecfi · 1 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY08
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 9 mm; length 50 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 08 09 050 | 9 | 50 | Steel | Zinc plated | M5 | 65 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY09Tecfi · 1 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY09
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 9 mm; length 50 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 09 09 050 | 9 | 50 | Steel | Zinc plated | M5 | 65 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY10Tecfi · 1 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY10
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 9 mm; length 50 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 10 09 050 | 9 | 50 | Steel | Zinc plated | M5 | 65 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY13Tecfi · 1 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY13
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 6 mm; length 30 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 13 06 030 | 6 | 30 | Steel | Zinc plated | M3 | 30 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY14Tecfi · 1 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY14
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 6 mm; length 30 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 14 06 030 | 6 | 30 | Steel | Zinc plated | M3 | 30 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY15Tecfi · 1 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY15
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 6 mm; length 30 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 15 06 030 | 6 | 30 | Steel | Zinc plated | M3 | 30 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DY16Tecfi · 1 referencesExpansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.Full description and technical table ↓

Series characteristics DY16
Expansion body for installation with a compatible screw. The screw activates plug deformation and contact with the hole walls.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 6 mm; length 30 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Identify solid or perforated substrate, drill diameter and matching screw. Plaster and finishes do not automatically count as effective anchorage depth. Nylon and other polymers do not necessarily share temperature or environmental limits.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor body Ø (mm) | Anchor length (mm) | Material | Finish | Misura vite M | Length vite Ls |
|---|---|---|---|---|---|---|
| Tecfi DY 16 06 030 | 6 | 30 | Steel | Zinc plated | M3 | 30 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
Anchor finder
Search by part number or select declared characteristics. Missing data do not satisfy a dimensional filter.
Request technical review or a quotation
Select a finder reference or describe the application.
FAQ
How do I select an anchor?
Start with substrate, load and environment, then identify configuration, depth, distances and part-specific documentation. The finder selects catalogue references and does not perform a design check.
Does equal diameter mean equal capacity?
No. Geometry, material, anchorage and technical assessment may differ. Dimensional comparison does not establish technical equivalence or interchangeability.
Do all anchors have an ETA and CE marking?
These cannot be assigned to an entire category. Check the product documentation, scope and applicability to the specific size. An ETA link does not extend its assessment to other parts.
What information is needed for an enquiry?
Part number or family, quantity, substrate material and condition, thicknesses, fixing geometry, environment, actions and required documents. For resins, also specify temperature and hole conditions.
Sources and documentation
Dimensions transcribed from the listed sources, checked on 13 November 2026. “—” means not stated or not normalised, not zero. Nominal diameter, thread and drill diameter are distinct. Consult the specific variant documentation for loads, installation and permitted applications. Availability is confirmed at quotation.
Dueemme Sidol S.r.l. · Sesto San Giovanni, Milan · Supply for industrial customers and OEMs.