Hollow-wall anchors
The fixing forms a bearing surface behind a board or within a cavity. Its grip range must include the actual wall thickness and allow the required deformation space.

Features and selection criteria
Distinguish single, double and composite boards. Consider local board strength, edge distance, spacing and cavity access; screw diameter alone does not identify the fixing.
Dimensions transcribed from the listed sources, checked on 13 November 2026. “—” means not stated or not normalised, not zero. Nominal diameter, thread and drill diameter are distinct. Consult the specific variant documentation for loads, installation and permitted applications. Availability is confirmed at quotation.
Designs, materials and substrates
This family contains 7 series or reference groups, with 29 catalogue rows. Series photographs help distinguish geometries and fixing methods; they do not necessarily represent every size in the range.
Documented materials
Nylon · Steel
Substrates mentioned in the sources
Check the reference documentation.
This list describes the family and does not assign every substrate to every variant.
Information to define before selection
| Parameter | What to check |
|---|---|
| Load-bearing substrate | Material type, strength, any cracking, useful thickness and hole conditions. Compatibility must be established for the selected design and size. |
| Fixing geometry | Total length, body or thread diameter and drill diameter are distinct parameters. Through-fixings must allow for fixture thickness and non-load-bearing layers. |
| Depth and distances | Compare hole depth, nominal or effective anchorage depth, edge distances and spacing. A deeper hole does not automatically increase fixing capacity. |
| Environment and exposure | Check material and coating of all components, temperature and service conditions. A2, A4 and HCR stainless designs require selection appropriate to the environment. |
| Loads and documentation | Define action directions and combinations and check the part-specific document. Dimensional data identify the part but do not replace a design verification. |
Installation sequence to verify
- Measure actual board thickness and clear cavity depth.
- Select a grip range covering the wall.
- Insert and deform the body using the prescribed method.
- Fit the component without locally overloading the board.
This sequence guides the reading of the instructions. Diameters, depths, equipment and tightening values remain those of the specific variant.
Series and technical tables
ADL01Tecfi · 3 referencesHollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.Full description and technical table ↓

Series characteristics ADL01
Hollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.
Materials represented by the variants: Nylon.
Documented series dimensions: nominal Ø 10 mm; length 36–53 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Distinguish single, double and composite boards. Consider local board strength, edge distance, spacing and cavity access; screw diameter alone does not identify the fixing.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor length (mm) | Anchor body Ø (mm) | Spessore materiale di base min (mm) | Spessore materiale di base max (mm) |
|---|---|---|---|---|
| Tecfi ADL 01 10 036 | 36 | 10 | 8 | 13 |
| Tecfi ADL 01 10 044 | 44 | 10 | 14 | 20 |
| Tecfi ADL 01 10 053 | 53 | 10 | 23 | 27 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
ADL02Tecfi · 3 referencesHollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.Full description and technical table ↓

Series characteristics ADL02
Hollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.
Materials represented by the variants: Nylon.
Documented series dimensions: nominal Ø 10 mm; length 36–53 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Distinguish single, double and composite boards. Consider local board strength, edge distance, spacing and cavity access; screw diameter alone does not identify the fixing.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Anchor length (mm) | Anchor body Ø (mm) | Drive | Spessore materiale di base min (mm) | Spessore materiale di base max (mm) | Fixture thickness max (mm) |
|---|---|---|---|---|---|---|
| Tecfi ADL 02 10 036 | 36 | 10 | Impronta a Croce tipo Z | 8 | 13 | 10 |
| Tecfi ADL 02 10 044 | 44 | 10 | Impronta a Croce tipo Z | 14 | 20 | 15 |
| Tecfi ADL 02 10 053 | 53 | 10 | Impronta a Croce tipo Z | 23 | 27 | 16 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
HP01Tecfi · 13 referencesHollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.Full description and technical table ↓

Series characteristics HP01
Hollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 8–13 mm; drill Ø 8–13 mm; length 21–81 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Distinguish single, double and composite boards. Consider local board strength, edge distance, spacing and cavity access; screw diameter alone does not identify the fixing.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Drill Ø d₀ (mm) | Anchor length (mm) | Anchor body Ø (mm) | Material | Finish | Profondità foro h1 MIN (mm) | Spessore materiale di base min (mm) | Spessore materiale di base max (mm) |
|---|---|---|---|---|---|---|---|---|
| Tecfi HP 01 04 021 | 8 | 21 | 8 | Steel | Zinc plated | 30 | 2 | 4 |
| Tecfi HP 01 04 033 | 8 | 33.5 | 8 | Steel | Zinc plated | 43 | 3 | 9 |
| Tecfi HP 01 04 039 | 8 | 39.5 | 8 | Steel | Zinc plated | 49 | 8 | 15 |
| Tecfi HP 01 04 046 | 8 | 46.5 | 8 | Steel | Zinc plated | 56 | 3 | 20 |
| Tecfi HP 01 04 047 | 8 | 46.5 | 8 | Steel | Zinc plated | 56 | 16 | 21 |
| Tecfi HP 01 04 060 | 8 | 60 | 8 | Steel | Zinc plated | 70 | 34 | 38 |
| Tecfi HP 01 05 037 | 11 | 37 | 11 | Steel | Zinc plated | 47 | 6 | 10 |
| Tecfi HP 01 05 053 | 11 | 53 | 11 | Steel | Zinc plated | 63 | 6 | 14 |
| Tecfi HP 01 05 065 | 11 | 65.5 | 11 | Steel | Zinc plated | 77 | 14 | 30 |
| Tecfi HP 01 06 038 | 13 | 38 | 13 | Steel | Zinc plated | 47 | 6 | 11 |
| Tecfi HP 01 06 053 | 13 | 53 | 13 | Steel | Zinc plated | 63 | 3 | 14 |
| Tecfi HP 01 06 066 | 13 | 66 | 13 | Steel | Zinc plated | 77 | 14 | 30 |
| Tecfi HP 01 06 081 | 13 | 81 | 13 | Steel | Zinc plated | 92 | 28 | 43 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
HP02Tecfi · 4 referencesHollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.Full description and technical table ↓

Series characteristics HP02
Hollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 13 mm; drill Ø 13 mm; length 39–84 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Distinguish single, double and composite boards. Consider local board strength, edge distance, spacing and cavity access; screw diameter alone does not identify the fixing.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Drill Ø d₀ (mm) | Anchor length (mm) | Anchor body Ø (mm) | Material | Finish | Profondità foro h1 MIN (mm) | Spessore materiale di base min (mm) | Spessore materiale di base max (mm) |
|---|---|---|---|---|---|---|---|---|
| Tecfi HP 02 08 039 | 13 | 39 | 13 | Steel | Zinc plated | 47 | 11 | 6 |
| Tecfi HP 02 08 055 | 13 | 55 | 13 | Steel | Zinc plated | 48 | 14 | 3 |
| Tecfi HP 02 08 068 | 13 | 68 | 13 | Steel | Zinc plated | 78 | 30 | 14 |
| Tecfi HP 02 08 084 | 13 | 84 | 13 | Steel | Zinc plated | 94 | 43 | 28 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
HP03Tecfi · 2 referencesHollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.Full description and technical table ↓

Series characteristics HP03
Hollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 8–11 mm; drill Ø 8–11 mm; length 33.5–37 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Distinguish single, double and composite boards. Consider local board strength, edge distance, spacing and cavity access; screw diameter alone does not identify the fixing.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Drill Ø d₀ (mm) | Anchor length (mm) | Anchor body Ø (mm) | Material | Finish | Profondità foro h1 MIN (mm) | Spessore materiale di base min (mm) | Spessore materiale di base max (mm) |
|---|---|---|---|---|---|---|---|---|
| Tecfi HP 03 04 033 | 8 | 33.5 | 8 | Steel | Zinc plated | 42 | 9 | 3 |
| Tecfi HP 03 05 037 | 11 | 37 | 11 | Steel | Zinc plated | 47 | 10 | 6 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
HP04Tecfi · 2 referencesHollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.Full description and technical table ↓

Series characteristics HP04
Hollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 8–11 mm; drill Ø 8–11 mm; length 33.5–37 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Distinguish single, double and composite boards. Consider local board strength, edge distance, spacing and cavity access; screw diameter alone does not identify the fixing.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Drill Ø d₀ (mm) | Anchor length (mm) | Anchor body Ø (mm) | Material | Finish | Profondità foro h1 MIN (mm) | Spessore materiale di base min (mm) | Spessore materiale di base max (mm) |
|---|---|---|---|---|---|---|---|---|
| Tecfi HP 04 04 033 | 8 | 33.5 | 8 | Steel | Zinc plated | 42 | 9 | 3 |
| Tecfi HP 04 05 037 | 11 | 37 | 11 | Steel | Zinc plated | 47 | 10 | 6 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
HP05Tecfi · 2 referencesHollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.Full description and technical table ↓

Series characteristics HP05
Hollow-wall fixing forming a bearing surface behind the board or in the cavity. Board thickness and free space determine the usable configuration.
Materials represented by the variants: Steel.
Documented series dimensions: nominal Ø 8–11 mm; drill Ø 8–11 mm; length 33.5–37 mm. Endpoints describe the listed sizes rather than a continuous range. Use the part-specific row for each combination.
Distinguish single, double and composite boards. Consider local board strength, edge distance, spacing and cavity access; screw diameter alone does not identify the fixing.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Drill Ø d₀ (mm) | Anchor length (mm) | Anchor body Ø (mm) | Material | Finish | Profondità foro h1 MIN (mm) | Spessore materiale di base min (mm) | Spessore materiale di base max (mm) |
|---|---|---|---|---|---|---|---|---|
| Tecfi HP 05 04 033 | 8 | 33.5 | 8 | Steel | Zinc plated | 42 | 9 | 3 |
| Tecfi HP 05 05 037 | 11 | 37 | 11 | Steel | Zinc plated | 47 | 10 | 6 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
Anchor finder
Search by part number or select declared characteristics. Missing data do not satisfy a dimensional filter.
Request technical review or a quotation
Select a finder reference or describe the application.
FAQ
How do I select an anchor?
Start with substrate, load and environment, then identify configuration, depth, distances and part-specific documentation. The finder selects catalogue references and does not perform a design check.
Does equal diameter mean equal capacity?
No. Geometry, material, anchorage and technical assessment may differ. Dimensional comparison does not establish technical equivalence or interchangeability.
Do all anchors have an ETA and CE marking?
These cannot be assigned to an entire category. Check the product documentation, scope and applicability to the specific size. An ETA link does not extend its assessment to other parts.
What information is needed for an enquiry?
Part number or family, quantity, substrate material and condition, thicknesses, fixing geometry, environment, actions and required documents. For resins, also specify temperature and hole conditions.
Sources and documentation
Dimensions transcribed from the listed sources, checked on 13 November 2026. “—” means not stated or not normalised, not zero. Nominal diameter, thread and drill diameter are distinct. Consult the specific variant documentation for loads, installation and permitted applications. Availability is confirmed at quotation.
Dueemme Sidol S.r.l. · Sesto San Giovanni, Milan · Supply for industrial customers and OEMs.