Bonded anchors
Resin transfers actions between a metal element and the hole wall. The system comprises the resin, rod or sleeve, substrate and installation procedure described in its technical assessment.

Features and selection criteria
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
Dimensions transcribed from the listed sources, checked on 13 November 2026. “—” means not stated or not normalised, not zero. Nominal diameter, thread and drill diameter are distinct. Consult the specific variant documentation for loads, installation and permitted applications. Availability is confirmed at quotation.
Designs, materials and substrates
This family contains 15 series or reference groups, with 22 catalogue rows. Series photographs help distinguish geometries and fixing methods; they do not necessarily represent every size in the range.
Documented materials
Resin · Stainless A4 · Stainless A2 · HCR stainless · Steel
Substrates mentioned in the sources
Concrete · Cracked concrete · Masonry · Perforated masonry
This list describes the family and does not assign every substrate to every variant.
Information to define before selection
| Parameter | What to check |
|---|---|
| Load-bearing substrate | Material type, strength, any cracking, useful thickness and hole conditions. Compatibility must be established for the selected design and size. |
| Fixing geometry | Total length, body or thread diameter and drill diameter are distinct parameters. Through-fixings must allow for fixture thickness and non-load-bearing layers. |
| Depth and distances | Compare hole depth, nominal or effective anchorage depth, edge distances and spacing. A deeper hole does not automatically increase fixing capacity. |
| Environment and exposure | Check material and coating of all components, temperature and service conditions. A2, A4 and HCR stainless designs require selection appropriate to the environment. |
| Loads and documentation | Define action directions and combinations and check the part-specific document. Dimensional data identify the part but do not replace a design verification. |
Installation sequence to verify
- Identify resin, rod or sleeve and the system’s application scope.
- Check substrate temperature and hole conditions; drill and clean as specified.
- Prepare and inject the resin as instructed, avoiding air pockets.
- Insert the element and respect working and curing times before loading.
This sequence guides the reading of the instructions. Diameters, depths, equipment and tightening values remain those of the specific variant.
Series and technical tables
XWE01Tecfi · 1 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: epoxy formulation.Full description and technical table ↓

Series characteristics XWE01
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: epoxy formulation.
Materials represented by the variants: Resin.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contenuto (ml) | Part-specific documentation indicators |
|---|---|---|
| Tecfi XWE 01 00 585 | 585 | ETA-CE EAD 330499-01-0601 · Sisma / Seismic |
System documents
- Technical document · Certificato EPD | (928 KB) ↗
- Declaration of performance · DoP - Dichiarazione di Prestazione EN Calcestruzzo | (2 MB) ↗
- Declaration of performance · DoP - Dichiarazione di Prestazione IT Barre d'armatura | (194 KB) ↗
- Safety data sheet · Scheda di Sicurezza IT | (525 KB) ↗
- ETA · Certificazione ETA - EN Barre d'armatura | (12 MB) ↗
- ETA · Certificazione ETA - EN Calcestruzzo | (4 MB) ↗
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DGE02Tecfi · 2 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: vinylester formulation, manufacturer-declared styrene-free formulation.Full description and technical table ↓

Series characteristics DGE02
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: vinylester formulation, manufacturer-declared styrene-free formulation.
Materials represented by the variants: Resin.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contenuto (ml) | Part-specific documentation indicators |
|---|---|---|
| Tecfi DGE 02 00 300 | 300 | ETA-CE EAD 330499-01-0601 · R049 · Sisma / Seismic |
| Tecfi DGE 02 00 400 | 400 | ETA-CE EAD 330499-01-0601 · R049 · Sisma / Seismic |
System documents
- Technical data sheet · Scheda tecnica IT-EN | (2 MB) ↗
- Declaration of performance · DoP - Dichiarazione di Prestazione IT Calcestruzzo | (2 MB) ↗
- Declaration of performance · DoP - Dichiarazione di Prestazione IT Barre d'armatura | (2 MB) ↗
- Safety data sheet · Scheda di Sicurezza IT | (492 KB) ↗
- ETA · Certificazione ETA EN Calcestruzzo | (2 MB) ↗
- ETA · Certificazione ETA EN Barre d'armatura | (2 MB) ↗
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DGE12Tecfi · 1 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: vinylester formulation, manufacturer-declared styrene-free formulation.Full description and technical table ↓

Series characteristics DGE12
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: vinylester formulation, manufacturer-declared styrene-free formulation.
Materials represented by the variants: Resin.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contenuto (ml) | Part-specific documentation indicators |
|---|---|---|
| Tecfi DGE 12 00 400 | 400 | ETA-CE EAD 330499-01-0601 · R049 · Sisma / Seismic |
System documents
- Declaration of performance · DoP - Dichiarazione di Prestazione IT Calcestruzzo | (2 MB) ↗
- Declaration of performance · DoP - Dichiarazione di Prestazione IT Barre d'armatura | (2 MB) ↗
- Safety data sheet · Scheda di Sicurezza IT | (492 KB) ↗
- ETA · Certificazione ETA EN Calcestruzzo | (2 MB) ↗
- ETA · Certificazione ETA EN Barre d'armatura | (2 MB) ↗
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DGE22Tecfi · 1 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: vinylester formulation, manufacturer-declared styrene-free formulation.Full description and technical table ↓

Series characteristics DGE22
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: vinylester formulation, manufacturer-declared styrene-free formulation.
Materials represented by the variants: Resin.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contenuto (ml) | Part-specific documentation indicators |
|---|---|---|
| Tecfi DGE 22 00 400 | 400 | ETA-CE EAD 330499-01-0601 · R049 · Sisma / Seismic |
System documents
- Declaration of performance · DoP - Dichiarazione di Prestazione IT Calcestruzzo | (2 MB) ↗
- Declaration of performance · DoP - Dichiarazione di Prestazione IT Barre d'armatura | (2 MB) ↗
- Safety data sheet · Scheda di Sicurezza IT | (492 KB) ↗
- ETA · Certificazione ETA EN Calcestruzzo | (2 MB) ↗
- ETA · Certificazione ETA EN Barre d'armatura | (2 MB) ↗
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DGE04Tecfi · 2 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: manufacturer-declared styrene-free formulation.Full description and technical table ↓

Series characteristics DGE04
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: manufacturer-declared styrene-free formulation.
Materials represented by the variants: Resin.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contenuto (ml) | Part-specific documentation indicators |
|---|---|---|
| Tecfi DGE 04 00 300 | 300 | ETA-CE EAD 330499-01-0601 · Sisma / Seismic |
| Tecfi DGE 04 00 400 | 400 | ETA-CE EAD 330499-01-0601 · Sisma / Seismic |
System documents
- Declaration of performance · DoP - Dichiarazione di Prestazione IT Calcestruzzo | (190 KB) ↗
- Declaration of performance · DoP - Dichiarazione di Prestazione IT Muratura | (193 KB) ↗
- Safety data sheet · Scheda di Sicurezza IT | (350 KB) ↗
- ETA · Certificazione ETA - EN Calcestruzzo | (875 KB) ↗
- ETA · Certificazione ETA - EN Muratura | (1 MB) ↗
- ETA · Certificazione ETA - EN Muratura-sismico | (1 MB) ↗
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DGE01Tecfi · 2 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: polyester formulation, manufacturer-declared styrene-free formulation.Full description and technical table ↓

Series characteristics DGE01
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: polyester formulation, manufacturer-declared styrene-free formulation.
Materials represented by the variants: Resin.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contenuto (ml) | Part-specific documentation indicators |
|---|---|---|
| Tecfi DGE 01 00 300 | 300 | ETA-CE |
| Tecfi DGE 01 00 400 | 400 | ETA-CE |
System documents
- Technical data sheet · Scheda tecnica EN | (349 KB) ↗
- Declaration of performance · DoP - Dichiarazione di Prestazione IT Muratura | (3 MB) ↗
- Declaration of performance · DoP - Dichiarazione di Prestazione IT Calcestruzzo | (3 MB) ↗
- ETA · Certificato ETA - EN | (2 MB) ↗
- ETA · Certificazione ETA - EN Calcestruzzo | (2 MB) ↗
- Safety data sheet · Scheda di Sicurezza IT | (403 KB) ↗
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
DH01Tecfi · 3 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone.Full description and technical table ↓

Series characteristics DH01
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Per cartucce da |
|---|---|
| Tecfi DH 01 01 300 | 150 - 165 - 280 - 290 - 300 - 310 |
| Tecfi DH 01 00 345 | 150 - 165 - 300 - 345 - 360 |
| Tecfi DH 01 00 400 | 380 - 400 |
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
EJOT MULTIFIX® USFEJOT · 1 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: vinylester formulation.Full description and technical table ↓

Series characteristics EJOT MULTIFIX® USF
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: vinylester formulation.
Materials represented by the variants: Resin.
Substrates mentioned in the series sources: Concrete, Cracked concrete, Masonry. Check the application scope for the individual part.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contents (ml) |
|---|---|
| EJOT 9571000280 | 280.0 |
System documents
- ETA · ETA-16/0107.pdf ↗
- ETA · ETA-16/0089.pdf ↗
- ETA · ETA-16/0089.pdf ↗
- ETA · DoP ETA-16/0089.pdf ↗
- ETA · DoP ETA-16/0107.pdf ↗
- Technical document · Fire assessment EBB-170019_39en.pdf ↗
- Safety data sheet · Safety data sheet.pdf ↗
- Safety data sheet · EJOT Multifix USF - Scheda di Sicurezzza_IT.pdf ↗
- ETA · DoP ETA-22/0704.pdf ↗
- ETA · ETA-22/0704.pdf ↗
- Technical document · Brochure.pdf ↗
- Technical data sheet · Product data sheet.pdf ↗
- Technical data sheet · Technical data sheet.pdf ↗
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
EJOT MULTIFIX® USF WinterEJOT · 1 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: manufacturer-declared styrene-free formulation.Full description and technical table ↓

Series characteristics EJOT MULTIFIX® USF Winter
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: manufacturer-declared styrene-free formulation.
Materials represented by the variants: Resin.
Substrates mentioned in the series sources: Concrete, Cracked concrete, Masonry. Check the application scope for the individual part.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contents (ml) |
|---|---|
| EJOT 9571000300 | 300.0 |
System documents
- ETA · ETA-16/0107.pdf ↗
- ETA · ETA-16/0089.pdf ↗
- ETA · ETA-16/0089.pdf ↗
- ETA · DoP ETA-16/0089.pdf ↗
- ETA · DoP ETA-16/0107.pdf ↗
- Technical document · Fire assessment EBB-170019_39en.pdf ↗
- Safety data sheet · EJOT Multifix USF - Scheda di Sicurezzza_IT.pdf ↗
- Safety data sheet · Safety data sheet.pdf ↗
- Technical data sheet · Product data sheet.pdf ↗
- Technical document · Assembly instruction.pdf ↗
- Technical document · Brochure.pdf ↗
- Technical data sheet · Technical data sheet.pdf ↗
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
EJOT MULTIFIX® SE1000 SismicaEJOT · 1 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone.Full description and technical table ↓

Series characteristics EJOT MULTIFIX® SE1000 Sismica
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone.
Materials represented by the variants: Stainless A4, Stainless A2, HCR stainless, Resin.
Substrates mentioned in the series sources: Concrete, Cracked concrete. Check the application scope for the individual part.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contents (ml) |
|---|---|
| EJOT 9571001000 | 585.0 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
EJOT MULTIFIX® HSF SismicaEJOT · 1 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone.Full description and technical table ↓

Series characteristics EJOT MULTIFIX® HSF Sismica
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone.
Materials represented by the variants: Stainless A4, Resin.
Substrates mentioned in the series sources: Concrete, Cracked concrete. Check the application scope for the individual part.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contents (ml) |
|---|---|
| EJOT 9571002420 | 420.0 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
EJOT MULTIFIX® SE 500EJOT · 1 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: epoxy formulation.Full description and technical table ↓

Series characteristics EJOT MULTIFIX® SE 500
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: epoxy formulation.
Materials represented by the variants: Steel, Resin.
Substrates mentioned in the series sources: Concrete, Cracked concrete. Check the application scope for the individual part.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contents (ml) |
|---|---|
| EJOT 9571000500 | 585.0 |
System documents
- ETA · DoP ETA-26/0190.pdf ↗
- ETA · DoP ETA-26/0189.pdf ↗
- Technical data sheet · Technical data sheet.pdf ↗
- Technical data sheet · Product data sheet.pdf ↗
- Technical document · Multifix SE500_IRL-EN - SDS.RPT.pdf ↗
- ETA · ETA-26_0189_EN.pdf ↗
- ETA · ETA-26_0190_ EJOT MULTIFIX SE500 Sormat ITH-EPOXe_eng.pdf ↗
- Technical document · Brochure.pdf ↗
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
EJOT MULTIFIX® PSF+EJOT · 2 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: polyester formulation, manufacturer-declared styrene-free formulation.Full description and technical table ↓

Series characteristics EJOT MULTIFIX® PSF+
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: polyester formulation, manufacturer-declared styrene-free formulation.
Materials represented by the variants: Resin.
Substrates mentioned in the series sources: Concrete, Masonry, Perforated masonry. Check the application scope for the individual part.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contents (ml) |
|---|---|
| EJOT 9573000410 | 420.0 |
| EJOT 9573002300 | 300.0 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
Super EpoxyEJOT · 1 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: epoxy formulation.Full description and technical table ↓

Series characteristics Super Epoxy
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: epoxy formulation.
Materials represented by the variants: Resin.
Substrates mentioned in the series sources: Concrete. Check the application scope for the individual part.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contents (ml) |
|---|---|
| EJOT 9570000400 | 400.0 |
System documents
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
EJOT MULTIFIX® USF TropicalEJOT · 2 referencesResin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: vinylester formulation.Full description and technical table ↓

Series characteristics EJOT MULTIFIX® USF Tropical
Resin anchoring system matched to the metal elements and installation conditions specified by the manufacturer. Performance concerns the complete combination rather than the cartridge alone. Series design: vinylester formulation.
Materials represented by the variants: Steel, Resin.
Substrates mentioned in the series sources: Concrete, Cracked concrete, Masonry. Check the application scope for the individual part.
Specify substrate temperature, dry or wet hole, drilling method, cleaning, working time and curing time. Concrete, masonry and post-installed rebar assessments have separate scopes; approvals from different products cannot be combined.
The table lists available characteristics for each reference; alternative installation configurations remain separate. Refer to the linked documents for torque, loads and conditions not specified in the table.
View the manufacturer’s product page ↗Part-specific technical table
Values and symbols follow the source. “—” = not stated in the table, not zero. The std, red1 and red2 designations identify different manufacturer configurations.
| Part number and source | Contents (ml) |
|---|---|
| EJOT 9570000420 | 420.0 |
| EJOT 9570001300 | 300.0 |
System documents
- ETA · DoP-ETA-26/0193.pdf ↗
- ETA · DoP-ETA-26/0194.pdf ↗
- ETA · DoP-ETA-26/0195.pdf ↗
- Technical data sheet · Technical data sheet.pdf ↗
- Technical data sheet · Product data sheet.pdf ↗
- Technical document · Multifix USF Tropical_IRL-EN - SDS.RPT.pdf ↗
- ETA · ETA_26-0193_EJOT_Multifix_USF_ETAs_EN_10.03.2026.pdf ↗
- ETA · ETA_26-0194_EJOT_Multifix_USF_rebar_ETAs_EN_10.03.2026.pdf ↗
- ETA · ETA_26-0195_EJOT_Multifix_USF_masonry_ETAs_EN_10.03.2026.pdf ↗
- Technical document · Brochure.pdf ↗
ETA, fire or seismic indicators listed for one part do not extend to other sizes. Permissible loads and torque values not listed here must be obtained from the applicable document and actual configuration.
Anchor finder
Search by part number or select declared characteristics. Missing data do not satisfy a dimensional filter.
Request technical review or a quotation
Select a finder reference or describe the application.
FAQ
How do I select an anchor?
Start with substrate, load and environment, then identify configuration, depth, distances and part-specific documentation. The finder selects catalogue references and does not perform a design check.
Does equal diameter mean equal capacity?
No. Geometry, material, anchorage and technical assessment may differ. Dimensional comparison does not establish technical equivalence or interchangeability.
Do all anchors have an ETA and CE marking?
These cannot be assigned to an entire category. Check the product documentation, scope and applicability to the specific size. An ETA link does not extend its assessment to other parts.
What information is needed for an enquiry?
Part number or family, quantity, substrate material and condition, thicknesses, fixing geometry, environment, actions and required documents. For resins, also specify temperature and hole conditions.
Sources and documentation
Dimensions transcribed from the listed sources, checked on 13 November 2026. “—” means not stated or not normalised, not zero. Nominal diameter, thread and drill diameter are distinct. Consult the specific variant documentation for loads, installation and permitted applications. Availability is confirmed at quotation.
Dueemme Sidol S.r.l. · Sesto San Giovanni, Milan · Supply for industrial customers and OEMs.