Swivel seals
Profiles separating circuits in swivelling or oscillating joints. Assess pressure, relative speed, medium and groove geometry together.
Family illustration; not an individual profile or manufacturing drawing.
Reference profiles.
Open a profile for construction details and the available manufacturer technical sheet.
M15Two-piece
Construction features
- Two-piece
- O-ring as sealing and preloading element
Technical documentation
Manufacturer technical sheet: section geometry, dimensions and operating information for the referenced profile.
Technical sheet · PDF · EN ↗FST catalogue reference. Dimensions and compound must match the selected item.
M16Two-piece
Construction features
- Two-piece
- O-ring as sealing and preloading element
Technical documentation
Manufacturer technical sheet: section geometry, dimensions and operating information for the referenced profile.
Technical sheet · PDF · EN ↗FST catalogue reference. Dimensions and compound must match the selected item.
M17Elastomer element enclosed by rubberised fabric supports
Construction features
- Elastomer element enclosed by rubberised fabric supports
Technical documentation
Manufacturer technical sheet: section geometry, dimensions and operating information for the referenced profile.
Technical sheet · PDF · EN ↗FST catalogue reference. Dimensions and compound must match the selected item.
M19Three-piece
Construction features
- Three-piece
- Combined with support rings
Technical documentation
Manufacturer technical sheet: section geometry, dimensions and operating information for the referenced profile.
Technical sheet · PDF · EN ↗FST catalogue reference. Dimensions and compound must match the selected item.
RPORA32Symmetrical
Construction features
- Symmetrical
- Double-acting
- Two-piece
Technical documentation
Manufacturer technical sheet: section geometry, dimensions and operating information for the referenced profile.
Technical sheet · PDF · EN ↗FST catalogue reference. Dimensions and compound must match the selected item.
RPORI32Symmetrical
Construction features
- Symmetrical
- Double-acting
- Two-piece
Technical documentation
Manufacturer technical sheet: section geometry, dimensions and operating information for the referenced profile.
Technical sheet · PDF · EN ↗FST catalogue reference. Dimensions and compound must match the selected item.
No matching profile. Try a shorter code.
Data for the correct selection.
| Selection parameter | What to specify |
|---|---|
| Dimensions | Shaft/rod or bore diameter d/D; groove diameter; width H; tolerances |
| Material and compound | Compound code, hardness, reinforcements and any required approvals. Check the individual profile document. |
| Medium | Fluid type, concentration, additives and cleaning agents. |
| Service conditions | Minimum/maximum temperature, pressure and peaks; sliding speed or rotation; duty cycle. |
| Installation | Groove drawing, surface finish, clearances, pressure direction and assembly method. |
| Traceability and documents | Specify the required compound, conformity declarations and batch documentation in the enquiry. |
Temperature, pressure and speed limits depend on the exact compound, profile and installation. Do not combine maximum ratings from different conditions or extend one profile’s ratings to the whole family.
Profile identifiers refer to the FST technical catalogue. Supply configuration and documentation are confirmed for the specific enquiry.
← All sealing families